We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
Producer: W&H (perforating type) Type: Matador S1 Bag width: 50-260 mm. Tube length: 120-540 mm. With 4 colour print
used
Turning- and Distibution Built in: 2000; working condition
used
Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.
new
Included 2 containers, filter, roof. Without spec. floor Air inlet 4x300mm Air outlet 4x500-600mm Explosion protection
used
Type Gemini 4000 Bj.11/2007 8000mm Laengslaufbahn 2 x Autogen burner 1 x Plasmasupport Preparation Working area 3500mmx6000mm without filter system, without burning table. commissioning on request ; ready for immediate use
used
Wire range: a) up to 800 N/mm2 = 6.0 - 15.0 mm b) to 1200 N/mm2 = 6.0 - 12.0 mm c) to 1400 N/mm 2 = 6.0 - 11.0 mm section: up to 14,000 mm feed speed: 22 - 120 mtr./min machine was partially overhauled and repainted; very good
used
Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good
used
wire diameter range: a) up to 800 N/mm² = 6,0 - 15,0 mm b) up to 1200 N/mm² = 6,0 - 12,0 mm c) up to 1400 N/mm² = 6,0 - 11,0 mm cutting length: max. 14.000 mm wire feeding speed: 22 - 120 mtr./min. machine is been partly reconditioned and new painted; very good
used
wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. complete with ciller and motorized decoiler; good
used
Wire staerke range: 2.0 - 6.0 mm sectional slats: max. 500 mm suitable for round, profile and flat drainage; ready for use
used
wire diameter range: 2,0 - 6,0 mm cutting length: up to 500 mm suitable for Round- Profil- and Flatwire; ready for operation
used
Wire diameter range: 8.0 - 16.0 mm section sections: up to 14,500 mm feed speed: up to 50 mtr/min machine has been repaired, repainted, repainted + new electrics; ready for use
used
wire diameter range: 8,0 - 16,0 mm cutting length: up to 14.500 mm wire feeding speed: up to 50 mtr./min. Machine is been repaired, tested, new painted, + new Electric ; ready for operation
used
Huelsen or rolls with width: 3.0 - 23 mm Band thickness: 0.7 - 1.5 mm Inner diameter: 3.5 - 7.5 mm capacity: 270 rpm; very good -as good as new
used
Bushes or rollers with strip width: 3,0 - 23 mm Strip thickness: 0,7 - 1,5 mm Internal bush diameter: 3,5 - 7,5 mm Output: 270/min.; very good -like new-
used
Machine was partially overhauled in 2014 wire diameter range: 4.0 - 10.0 mm section sections: max. 3,000 mm feed speed: 90/130 mtr./in; ready for immediate use
used
Machine is been partly reconditioned in 2014 wire diameter range: 4,0 - 10,0 mm cutting length: up to 3.000 mm wire feeding speed: 90/130 mtr./min.; ready for operation
used
Wire diameter range: 4.0 - 10.0 mm section sections: up to 4,000 mm feed speed: 90 / 120 mtr./min; ready for use
used
wire diameter range: 4,0 - 10,0 mm cutting length: up to 4.000 mm wire feeding speed: 90 / 120 mtr./min; ready for operation
used
Wire diameter range: 8.0 - 12.0 mm section slats: max. 5,550 mm feed speed: 70 - 100 mtr./min directional fluegel with hyperbolic rollers; good
used
wire diameter range: 8,0 - 12,0 mm cutting length: up to. 5.500 mm wire feeding speed: 70 - 100 mtr./min. Straightener with hyperbolic rolls; good
used
Wire diameter range: 1.0 - 5.0 mm Ring diameter: 80 - 600 mm feed insert: max. 10,000 mm Power: 12 - 30 rings/min Welding capacity: max. 10 kVA with gluedevice; ready for use
used
wire diameter range: 1,0 - 5,0 mm ring diameter range: 80 - 600 mm wire feeding length: max. 10.000 mm output: 12 - 30 rings/min welding capacity: max. 10 kVA with annealing unit; ready for operation
used
Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min. machine has been completely repainted; very good
used
wire diameter range: 1,5 - 7,0 mm cutting length: max. 2.000 mm wire feeding speed: 5 - 120 mtr./min machine is been complete new painted; very good
used
Wire diameter range: 1.0 - 4.0 mm section sections: max. 2,000 mm feed speed: 5 - 90 mtr./min.; ready for use
used
wire diameter range: 1,0 - 4,0 mm cutting length: up to 2.000 mm wire feeding speed: 5 - 90 mtr./min; ready for operation
used
Wire diameter range: 1.0 - 5.0 mm Ring diameter: 80 - 600 (1,000 mm) feed load: max. 10,000 mm power: 12 - 30 rings/min Welding capacity: 10 kVA; ready for use
used
wire diameter range: 1,0 - 5,0 mm ringdiameter: 80 - 600 (1.000 mm) wire feeding length: max. 10.000 mm output: 12 - 30 rings/min welding capacity: 10 kVA; ready for operation
used
Complete range of well-preserved stamps and dies in the same number and diameter as in the brochure shown.
used
equipped with: 5 slide units 1 Eccentricpress 70 kN working range: wire diameter range: max. 3,0 mm strip metal width: max. 40 mm feeding length: max. 170 mm output: max. 250/min; ready for operation
used
The mubea and Peddinghaus tools pictured are not sold completely. You can tell us what stamps and dies you need, so that we put together an individual assortment for you.
We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.
used
Plasma and cutting machine Promotec Ector 30 / 170 Working range: 3000mm x 17000mm 1 x Plasma Ht 2000 Hypertherm cutting up to 25mm 1 x Autogen support up to 100mm machine to visit under power . Without table and filter assembly and commissioning on request; ready for use
used
UWM BORING MILLING MACHINE TYPE 40A -MK4 -75/1600 t/m -Draait right en linksom -Tapfunctie -Boorgedeelte is in hoogte verstelbaar -Boorgedeelte is kantelbaar -Tandwielaangedreven -Beschermkap -Noodstop -Boorkop Zelfspannende -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Nibbling machine trump, unloading 1000 mm, copying device, cutting, nibbling, slits, gills, beading, etc.
used
Control and tax rate Baumueller 3.8107Ha
used
Punching and forming center in chain with an assembly line for the production of relays, see pictures
used
Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.
used
Rotary vane pump of Bush / AZO Air capacity: 160 m ³/h Power: 5.5 kw Vacuum capacity: 20 mbar
used
Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm
new
Vario can 15-3 capacity: 6,000 cans/h - 0, 33 ltr. Cans with 15 filling valves and 3 head can seamer between filler and seamer is a Co2 injection the filler is for beer and softdrinks suitable for both 330 ml and 500 ml can size can type standard 211/202 pneumatic: Festo CE regulation filling valves: electronic control pre-metering valve CIP tulps included PLC: Siemens new machine So available: Vario can 20-6 capacity: 9,000 cans/h - 0.33 ltr. Cans with 20 filling valves and 6head seamer Vario can 32-6 capacity: until 15,000 cans/h - 0.33 ltr. Cans With 32 filling valves and 6head seamer Video!
used
Esab UXD - P 2500 Control NCE 290 1 x Plasma: Kjellberg PA S 40 cut up to 30mm 1 x Autogen Support Working area: 2500mm x 3500mm Including suction machine has two-sided drive and is very well maintained. commissioning on request ; ready for immediate use
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 135 Operating hours: 1012 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Digital readout number of ...
used
digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock
new
TH 3309 Control and spindle lathe Fixed bezel D = 19-70 mm Revolving bezel D = 16-50 mm LED machine lamp Reduction sleeve MK 3 / MK 5 Motor protection switch Emergency stop foot operated Engine: 400V 1, 5 kW 50 Hz Tip height 156 mm Top width 830 mm Spindle speed 60 - 2000 min-1 16 levels Spindle cone MK 5 Spindle bore D = 38 mm Weight 430 kg Dimensions Lxwxh: 1685 x 745 x 1320 mm G & PIECES 3402030
Producer : Honsel Type : Honco Phonix 26 Bag width : 50 - 260 mm Tube length : 100 - 480 mm. Speed : 1000 bags/min.
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 250 rpm up to: 2000 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1900 mm Various accessories: Coolant system Lamp
used
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 415 B Technical data Drill capacity in steel: 25 mm Threat cutting in steel M: 16 Milling capacity: 100 cm3/min Taper in spindle: SF32 Spindle speeds: from: 50 rpm up to: 10000 rpm Table length: 885 mm Table width: 320 mm Distance of the T-slots: 50 mm T-channel width: 12 mm Number of T-channels: 5 Table load max.: 250 kg Height of table above floor: 1040 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 500 mm Transversal travel: 250 mm Vertical travel: 145 mm Feeds: X axis: 1 - 11000 mm/min Y axis: 1 - 11000 mm/min Z axis: 1 - 6000 mm/min W axis: 1 - 3600 mm/min Rapid traverse X: 11 m/min Rapid traverse Y: 11 m/min Rapid traverse Z: 6 m/min Voltage 50 Hz 3x: 400 Volt Power: 7 kW Total power required: 16 kW Machine´ ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Vice Coolant system Lamp