conveyer used for sale

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Lifting capacity: 50000 kg Hoist height: 10000 mm Span length: 19380 mm Type: Overhead crane   MACH-id     5339 MAKE         ABUS TYPE           ZLK YOP            SPECIFICATIONS Span         19.380 mm Lift height           10.000 mm Lifting speed        0,66 / 4 m/min. Hoist trolley          5 / 20 m/min. Crane driving        10 / 40 m/min. Hight under roof      2020 mm DIMENSIONS Length         21000 mm Width           5460 mm Height          2200 mm Weight          22860 kg

Lifting capacity: 16000 kg Hoist height: 10000 mm Span length: 19380 mm Type: Overhead crane   MACH-id   5338 MAKE        ABUS TYPE         ZLK YOP           2006 SPECIFICATIONS Span       19.380 mm Lift height       10.000 mm Lifting speed        0,8 / 5 m/min. Hoist trolley         5/20 m/min. Crane driving       10/40 m/min. Hight under roof        1300 mm DIMENSIONS Length      21.000 mm Width           4110 mm Height          2020 mm Weight         10020 kg

Lifting capacity: 500 kg Hoist height: 3000 mm Span length: 4000 mm Type: Swivel Crane   Span  ca 4000 mm Height of lift   ca 3000 mm SWL / Kg   500 kg  

Lifting capacity: 20000 kg Hoist height: 0 mm Span length: 24500 mm Type: Overhead crane   DEMAG Demag Overheadcrane 24500 x 20 ton MACH - ID 6331 Make: DEMAG YOP: 1997 Span24.500 mm Capacity Kg20.000 kg

Lifting capacity: 10000 kg Hoist height: 0 mm Span length: 13000 mm Type: Overheadcrane   MACH-id  3522 MAKE   ABUS Germany TYPE  ELK YEAR  90 er Abus overheadcrane

Lifting capacity: 50000 kg Hoist height: 6000 mm Span length: 19980 mm Type: Overhead crane   MACH-id          5339 MAKE               ABUS TYPE                 ZLK YOP              SPECIFICATIONS Span          19.980 mm Lift height      6.000 mm Capacity Kg    50.000 Kg

Lifting capacity: 16000 kg Hoist height: 6000 mm Span length: 19980 mm Type: Bovenloopkranen   MACH-id     5338 MAKE         ABUS TYPE           ZLK YOP                SPECIFICATIONS Span         19.980 mm Lift height          6.000 mm Capacity Kg          16.000 Kg

Lifting capacity: 5000 kg Hoist height: 6000 mm Span length: 18000 mm Type: Overhead crane   MACH-id    5051 MAKE         ABUS TYPE           ELK YOP             2000 SPECIFICATIONS Span       18.000 mm Height of lift        6000 mm SWL / Kg      5000 kg DIMENSIONS Length       19000 mm Width         2100 mm Height        1200 mm

Lifting capacity: 10000 kg Hoist height: 6000 mm Span length: 15200 mm Type: Overheadcrane   MACH-id   3523 MAKE  Abus Germany TYPE  ELK YEAR   90 er SPECIFICATIONS Span  15.200 mm Height of lift   6.000 mm SWL / Kg  10.000 kg Loading capacity in Kg   10.000 Kg Abus overhead crane for sale More cranes on:   

Lifting capacity: 25000 kg Hoist height: 0 mm Span length: 13000 mm Type: Overheadcrane   MACH-id   3524 MAKE   Stahl Germany TYPE   YEAR SPECIFICATIONS   Span13.000 mm SWL / Kg  25.000 kg Stahl used cranesystem, overhead crane.More cranes on: 

Lifting capacity: 5000 kg Hoist height: 12000 mm Span length: 23600 mm Type: Overheadcrane   MACH-id 3132 MAKE   ABUS TYPE  ELK YEAR  2010 SPECIFICATIONS Span 25000 mm Height of lift10000 mm SWL / Kg   5000 kg abus overhead crane  

-Manufacturer: KRONES -Type: Belt Conveyor Unit 180° -Year of manufacture: 2015 -Outside length: ~5000 mm -Width (ø): ~3000 mm -Belt width: 860 mm -Condition: Excellent

Lifting capacity: 10000 kg Hoist height: 12000 mm Span length: 23600 mm Type: Overheadcrane   MACH-id 3133 MAKE   Demag TYPE  ZLK YEAR  2010 SPECIFICATIONS   Span  23.600 mm Height of lift  12.000 mm SWL / Kg   10.000 kg demag overhead crane  

Lifting capacity: 6300 kg Hoist height: 6000 mm Span length: 17252 mm Type: Overhead Crane   Make Abus 6.3 ton Type ELV Year 2003enkelligger bovenlloop kraan length (mm)Span = 17.252 Height = 6.000 Cap = 6.300 kg Weight 5.015 Kg Lift = 0.8 - 5 M/min Hoist = 5/20M/min Number APC.Drive = 10/40 M/min Free in Okt 2015  

Lifting capacity: 48000 kg Hoist height: 10000 mm Span length: 19580 mm Type: ZLK   ABUS - ZLK Overhead crane 48/5 T x 19.580 x 10.000 mm Span:           19.580mm Lift height:    10.000mm Capacity Kg:    48000 + 5000 Kg Lifting speed:  0,66 / 4 m/min. Hoist trolley:  5 / 20 m/min. Crane driving:  10 / 40 m/min. Hight under roof:1.430mm Width:          2.510 mm  Height:         2.400 mm  Weight:         20.220 kg 

Lifting capacity: 3200 kg Hoist height: 4000 mm Span length: 6000 mm Type: VS   Span:        6000mm Lift height: 4000mm Capacity Kg: 3200 Lifting speed:5/20 Length:      8000mm Width:       1200mm Height:      5500mm Weight:      3000kg

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Hotmelt glue applicator conveyer for gluing of currogated boxes Make Nordson Model Conveyer Year 1998 ? Glue appliance width 120 cm (240 cm) Glue melter Nordson Vista Glue computer Nordson Eclipse EPC15 Number of heads 4 heads (Meier) Application to apply up to 4 lines of glue onto a substrate on the belt. commonly a corrugated box Available direct

Brush sanding machin with 3 working units. Machine has only a few operating hours. 1st working unit: - 5 rotating heads with 3 discs each - disc diameter 125 mm - quick change of the discs - motorized height adjustment 2. Station: - brush with diameter 300 mm - motorized height adjustment - Electronic inverter 4 kW 3. Station: - brush, diameter Durchmesser 300 mm - motorized height adjustment - Electronic inverter 4 kW - Rotative blower cleaning panel - Touch Screen IPC COMPACT 8,5 - conveyer with vacuum table - vacuum fan 7,5 kW - Vorschubgeschwindigkeit wird über einen FU geregelt - conveyer electronic inverter 2,2 kW - Producer Viet - Type Opera 5-3.3 XLL - Working width 1.350 mm - Year of construction 2018 - Working height 900 mm - Max. part height 200 mm - Vacuum transport belt - Operating side, left - Standort, nicht am Lager in Litauen - Voltage / HZ 400/50 - Spannungssch ...

Used Complete PET Line for Water 3000 bph 1 6 x BM500 Blow Mold system with 2 x 25 H P Commercial Air Compressors mounted on 1 x 240 gallon 250 p s i pressure tank 6 x pre heaters 6 x Blow molders capacity up to 3000 bottles per hour Complete with top of the line air preparation and air pressure units for a consistent reliable and oil less air supply 2 Ozone system BWOZ27 Deluxe ozone disinfection system Capacity up to 190 L water per minute Utilizes 100 gallon stainless steel tank for ozone contact time Complete with an oxygen concentrator ozone generator Visual inspection contact tube stainless steel pump venturi injector central electric controls and mounted on stainless steel frame Used Complete PET Spec 3 BR3000 bottle insert capacity up to 3000 bottles per hour automatic rinsing and position of bottles insuring clean bottles 4 BF3000 bottle filler capacity up to 3000 bottles per ho ...

Used shot blasting machine, barrel machine,roller conveyer machine,

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Stock number: U2257 Used stainless steel filter press by Seitz (Germany) type Orion model OF100/250. Filter press has 41 plates with dimensions 1000 mm x 1000 mm + 41 frames with depth 40 mm and 2 end plates. It gives surface of filtration 82 m2 and 1640 l cake volume. Filter press is opened and closed hydraulically by piston and hydraulic device driven by 2.2 kW el. motor. Below the plates there is mounted stainless steel collection tank with central screw conveyer. Press is equipped with control panel, pipes, two manometers, rubber sealings and screw type pump, driving the screw inside the collection tank. Last time press had been working in beer production.

Toshiba DC 350 C Horizontal Cold Chamber Aluminum High Pressure Die Casting Machine Locking Force: 350 tons Platen Size: -static: 945 x 960 mm -movable: 935 x 935 mm Tie Bar Diameter: 125 mm Clearance Between Tie Bars (V x H): 580 x 580 mm Die Thickness (max - min): 700 - 300 mm Die Stroke: 420 mm Injection Stroke: 480 mm Injection Positions: 0 and -125 mm Ejection Stroke: 20 - 90 mm Main Motors: 22 kw Machine Weight: approx. 13 tons Including: Electric, Sprayer, Extarcor, conveyer DCC series die casting machines - with pressure spike reduction, flash prevention and independent control of injection speed and pressure

Scanvaegt 4700 Grading and Batching Machine: Used Scanvaegt 4700 Grading and Batching Machine. Photos and Video available. Machine can be seen in operation. Application: sorts food products for size and weight 12 gate sorting sections + 4 automatic gates for batch or boxes Capacity: up to 180 pieces per minute 12 baskets (one side) Left to Right This grader of the CheckBin type is designed for high-precision weight grading. The reliable machine is able to provide intelligent batching to produce batches of accurate pre-set weight for packing on the next stage. Capacity: up to 180 pcs per minute Products: poultry, fish and meat Weighing precision: +/- 1 g Fault percentage: less than 1% of batch weight Max. batch size: 10 liters Construction: stainless steel IP67 Infeed conveyor- Goose neck type: 4300 mm Scale grader Takeaway conveyer Video available,  ...

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 170 to : 40x40x4 mm : 65x65x7 mm : 2 : 25/5 bzw- 18/7 mm : 350 to : 5 kW : 265 bar : 70 l Automatic line for punching and sharing angle STANDARD EQUIPMENT: INFEED/OUTFEED CONVEYERS idle rollers 3 conveyers each 3,3 m for feeding angles up to 12 m length WORKING UNITS: ROLLER FEED MEASURING SYSTEM feed by roller wheel (brushless moto),rotary encoder no time loss for measuring feeding speed variablefrom 0 to 36 m/min positioning accuracy in X axis0,25 mm + 0,15 mm per meter the last 250 mm can not be used PUNCHING UNIT (2X) 1 punching unit per leg 1 punch per punching unit adjustable back mark by tooling fromfrom 20-40 mm hydraulic downholder direct access for quick change ofpunches and dies SHEARING UNIT shearing power 350 kN single cut direct access for quick change ofshearing blade hydraulic downholder CNC CONTROL OMRON PLC colour touchscree ...

Stock number: U2395-3 Used vertical stainless steel silos for powders with total volume about 6000 l. Tank has internal diameter 180 cm x length of straight side of wall 144 cm. Silos has conical bottom, equipped with vibrating discharge outlet driven by el vibrating motor and pneumatically operated valve. Diameter of discharge 200 mm. Silos had been mounted on cylindrical support. Feeding inlet via top located connection to pneumatic conveyer. Silos has side wall rectangular connection for dust filter with dimensions 570 mm x 490 mm. There is a inspection manway with bolted lid with diameter 500 mm. Last time used in food industry.

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

Unwinding, cutting, stacking and depositing on a conveyor belt consisting of: 1x u550 divertler, slicer/stack system c23s25 (middle cut-out) and 1 x conveyor belt tray 2m and an extraction system GR 140.2 x trolley for paper rolls. Specifications: Dispenser u550: Umwinder u550 Outfeedplate Airshaft 70mm/520 Lifting KIT Offline KIT 2 trolleys for the paper rolls Cutting line C23S25: Cutter c23 Middle knife Gutter cut 6mm c20/23 Extraction side trim-c23 v2 Conn.parts Gutter cut c23 v2 Stacker s25: Aassy Automatic stop plate Conveyer/conveyor belt 2000/634 v-speed Extraction system GR 140 Appointment You have the opportunity to inspect the objects before buying. Location Location: Im Schorrenfeld 8 in 76661 Philippsburg-Hüttenheim Disclaimer The sale of used items takes place as the item stands and lies, to the exclusion of any warranty for material defec ...

Built in 1997 Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6,000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 Controls • missing and double sheet control intermediate elements • Spiral Raceway • Hand Fed • Jogging element • Criss-Cross Delivery • -connected with Perfect Binder • 21 clamps • Jogging station • Milling and roughening station • Hotmelt Spine Gluing Unit • Hotmelt Side Gluing Unit • Premelter • Gauzing Station • Stream Cover Feeder • cover scoring 2 to 6 lines • Cover pressing station • Lay down device • Shingle Conveyor Delivery optional equipment:--not included-- • extending of the gathering machine • Opticontrol signature image reader • Conveyer system approx. 20 m • three knife trimmer Kolbus HD 150

QUASER MK-60 Milling machine with two pallets 1993 with Fanuc O-M 3 axis machine. Work normally with robotic arm and 30 place for magazine tools. CAT 40. With Chip Conveyer. VMC. Weight 8500kg Axis X 610.0 mm Axis Y 510.0 mm Axis Z 510.0 mm

Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible.

Spindle diameter: 0 mm Longitudinal X: 15000 mm Vertical Y: 3150 mm Cross Z: 1600 mm Positions ATC: 0   Table length: 0 mm Table width: 0 mm Number of tables: 0   CNC Brand: Siemens CNC Model: 810 M Make Skoda CNC Type W 200 H - CNC Year 1981 / 1999 CNC Skoda Floorborer with Siemens 810 M Spindle diameter (mm) 200 Longitudinal X (mm)15.000 Cross Y (mm)3.150 Pos ATCW = 2.000 Number APC.Z = 1.600 CNC Siemens 810 M Ram Size = 520 x 520 Power = 77 kW Speeds Vario = 0.8 - 630 Rpm Feed Rate = 0.63 - 1.250 / 2.000 / 3.500 Optional: Floorplates = 13.000 x 5.560 mm 6 x 6.390 x 1.885 x 350 - T 36 Optional: Skoda Rotary Table Size = 4.000 x 3.550 mm X - Travel = 2.100 mm Max. load = ca. 80.000 Kg Incl. Chip Conveyer CNC Skoda Floorborer CNC Skoda Plattenbohrwerk  

: neu : ca. 10 Wochen ab Auftrags : Türkei : 69200 € : 1266.36 € : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 0.12 kW : 2.2 kW : 7.5 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTION: hydraulic top clamping € 1.940,-- chip conveyer € 1.540,-- turn table for turning the machine for mitre cutting € 5.730,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VERTICAL MACHINE CENTER Make : QUASER Model : MK60IIS CNC : Fanuc series 18MC Axis travel: -X (Longitudinal movement of column) = 1020mm -Y (Cross movement column) = 610mm -Z (Vertical movement of spindle head) = 560mm Table: -Table size = 1050x550x2 -Table loading capacity = 300kg x2 Spindle -Max. Spindle speed = 10.000 min^-1 -Type of spindle taper hole = ISO 40/BT40 -Tool storage capacity = 40 [80] Machine size: -Machine height = 3080mm -Floor space (with chip conveyer & 20 bar tank) = 2660x4380mm -Mass of machine = 11500kg

Autom. case packer incl. box labeller (thermo printer) Intermec USA and conveyer belts for good and bad products.

Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 28200 € : 5400x41x1,3 mm : 20-100 m/min : 450 mm : 425 mm : 695 x 425 mm : rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm : 0.12 kW : 0.55 kW : 4 kW : 3090 mm : 1200 mm : 1940 mm : 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping € 1.280,- micro cooling unit € 890,- chip conveyer € 1.090,- laser cutting line € 560,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kübelbahn Bucket Conveyer Dudik RK3750 in perfect condition, used for one project. 3750 Liter träglast 6000KG

FinnPower SG5, turret punching machine FMS-system for punching of sheet metal blanks, with integrated power shears, loading and sorting system (by conveyer belts, no stacking possibility) Maximum sheet size: 2 500 x 1 250 [mm] Maximum punch force: 300 [kN] Tooling: Mate tool holder Number of tools: 25 tools in turret, A-D station (Mate Standard) Index tooling: Yes, for specific stations Multitool possibility: Yes Year of manufacturing: 1997

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 € : 521.3 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm : 835 mm : 0.12 kW : 0.37 kW : 3220 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 800 mm/stroke chip conveyer (CNC/Touch) variable cutting pressure Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices suggested  ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 € : 917.76 € : Schwenkrahmen : 3120x27x0,9 mm : 20-100 m/min : 280 mm : 240 mm : 310x240 mm : rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm : 835 mm : 0.12 kW : 0.37 kW : 1.5 kW : 1.95 Nm : 1.95 Nm : 2800 mm : 2000 mm : 1820 mm : 1200 kg CNC control with 7", touchscreen for following functions: feeding length, pieces and rotation of the bow for mitre cutting automatic feed 1000 mm / stroke variable cutting pressure machine with speed variator coolante equipment motorizes chip brush chip conveyer automatic saw blade breakage detection hydraulic clamping vices material chute user manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 620 mm, 520 mm, 460 mm

achine details Stock-No. 1105-03973 Type of machine Machining Center - Vertical Make SPINNER Type U 620 Year of manufacture 2018 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis ex Works Price Technical details x-travel 620 mm Y-Travel 520 mm Z-Travel 460 mm Control HEIDENHAIN iTNC 640 table surface area 650 x 545 mm table load 500 t turning speeds 20 -12,000 rpm taper ISO SK 40 Tool Change Unit 24-fold Rapid Traverse 32 m/min total power requirement 25 kVA weight of the machine approx. 6 t dimensions of the machine approx. 3 X 2.415 X 2.90 m Additional information SPINNER U 620 compact ------------- Direct Weighing System HEIDENHAIN I TNC 640 15000 RPM Chip conveyer Ethernet card Handwheel Heidenhain HR410

Semi Automatic or Automatic Shrink Wrapper with welding bar New The automatic machine is very fast format changes 90 product feeding belt possibility of introducing product up to three rows with eccentric system the pusher works without air and has a motor controlled by inverter and encoder perfect to be inserted in automatic lines Production can vary according to the number of rows required Suitable for packaging individual or groups products in multiple lines in the desired format such as boxes packets of coffee trays etc Automatic and semiautomatic machines with welding bar with product feed conveyer in line set up for manual loading of the product on the belt or inserted in completely automatic lines Represent maximum simplification in bundling machine Created with a single supporting structure Suitable for packaging individual or already assembled products such as boxes trays cable  ...

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer