converting paper roll used for sale

4 adjustable spindles, pedal operation, drilling range 3-14mm, ...

6 adjustable spindles, pedal operation, drilling range 3-14mm, ...

Stacker EBA 551 LT; good condition; cleaned and tested; Cutting length 550mm; Insert height 92mm; Insertion depth 570mm; Side tables; Air table; Light barriers; Replacement knives; digital display with program. Paper cutter EBA 551 LT; good condition; cleaned and checked; cutting lenght 550mm; hight 92mm; depht 570mm; side tables; air table; photo sensor; secound knife; digital display with program.

Müro paper milling machine; Condition New; Makita machine; Connection to the milling head for suction.; for milling blocks; 5 pcs. available. Paper mill Müro; condition new; Makita nachine; connector at the milling head for dust suction; used for milling blocks; 5 pic. on stock.

W & H T 1441 FLAT PAPER HANDLE MACHINE

Unwinding, cutting, stacking and depositing on a conveyor belt consisting of: 1x u550 divertler, slicer/stack system c23s25 (middle cut-out) and 1 x conveyor belt tray 2m and an extraction system GR 140.2 x trolley for paper rolls. Specifications: Dispenser u550: Umwinder u550 Outfeedplate Airshaft 70mm/520 Lifting KIT Offline KIT 2 trolleys for the paper rolls Cutting line C23S25: Cutter c23 Middle knife Gutter cut 6mm c20/23 Extraction side trim-c23 v2 Conn.parts Gutter cut c23 v2 Stacker s25: Aassy Automatic stop plate Conveyer/conveyor belt 2000/634 v-speed Extraction system GR 140 Appointment You have the opportunity to inspect the objects before buying. Location Location: Im Schorrenfeld 8 in 76661 Philippsburg-Hüttenheim Disclaimer The sale of used items takes place as the item stands and lies, to the exclusion of any warranty for material defec ...

Storage number: 3573 COOLING WATER TANK Manufacturer: BELKI, Type: 12.20 Machines NR.: 1220.003, Built: 2000 specifications: Paper filter. 1160 mm

Digital program Air table 2 Side tables Light guards 2 Knives Complete cleaned, checked and tested.

Paper drilling machine Dürselen Corta PB 04 N; good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke onestellar; Max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; optional with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind drillers 42mm; sliding table; hole distance 31.7-293mm; for oiption with 7xFilofax drilling head.

double head paper drilling amchine

Manufacturer: Neolt Model: Electro Power Trim PLUS 250 Year: 2003 Furnishing: - electric rotary cutter with rotating circular knife - Cutting thickness up to 1.6 mm - Triggering of the cutting process by hand contact strip or foot pedal - Transparent pressure rail with which the material to be cut is placed during the cutting process is automatically pressed: - Illuminated cutting edge - Collection bag for clippings Ideal for cutting paper, pop-up and other displays, laminated Printing, banners, tarpaulins and self-adhesive foils. The device works flawless and was unfortunately used very little. Availability: In stock Defects: none Location: germany Price: on request

Laminator - paper overboard Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery delivery on a table Condition can be purchased `as-is`or refurbished on most parts (ask details) Available Direct or very soon

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: EBA Cutting Machine 551 LT with side tables and light barriers Electro-mechanical knife drive Air table Chpjpskqes Hydraulic drive for press beams Infinitely variable pressing pressure (min. 200 daN, max. 1100 daN) with display via pressure gauge Foot pedal for pre-pressing or as a cutting indicator Press beam cover Electrically operated backgauge with professional program control electronic handwheel with infinitely variable speed for manual backgauge fine adjustment Optical cutting indicator with bright light-emitting diodes (LEDs) Press beam guided on both sides for uniform pressing pressure Djqedv Precision backgauge spindle adjustable backgauge rake with narrow pitch (32 mm) and plast ...

DEMO MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar Cutting Machine D 56 ECO - Cutting width: 560mm - Insertion depth: 560mm - Insert height: max. 80mm - Pressing pressure: min. 200 daN; max. 1,200 daN - Saddle speed, return (0 - ...): 70mm / second - Residual cut, automatic, without cover plate: 15mm - Residual cut, automatic, with cover plate 50mm: 50mm - Voltage: 400V/50Hz/3~ - Dimensions (W × D × H): 1,150×1,670×1,500mm On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

DEMO MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar Cutting Machine D 56 ECO - Cutting width: 560mm - Insertion depth: 560mm - Insert height: max. 80mm - Pressing pressure: min. 200 daN; max. 1,200 daN - Saddle speed, return (0 - ...): 70mm / second - Residual cut, automatic, without cover plate: 15mm - Residual cut, automatic, with cover plate 50mm: 50mm - Voltage: 400V/50Hz/3~ - Dimensions (W × D × H): 1,150×1,670×1,500mm On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

TEST MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar High Speed Cutter N 176 PRO AT - Cutting width: 1,760mm - Insertion depth: 2,250mm - Insert height: max. 165mm - Safety pressurization: 50 daN - Pressing pressure: min. 150 daN; max. 7,000daN - Saddle speed, return (0 - ...): 1,600mm / second - Knife speed: 45 cycles/min - Residual cut, automatic, without cover plate: 35mm - Residual cut, automatic, with cover plate: 120mm - Voltage: 400V/50Hz/3~ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

The PB.04N is a professional 4-spindle paper drilling machine with extensive standard equipment. The PB.04N paper drill offers variable speed, variable lifting speed, drill belt, drill cooling, drill lubrication, robust sliding table, spacers for quick and precise adjustment of the drill heads. This makes it possible to drill large print runs, plastic, art print or laminated paper. In tip mode, drill bits of different lengths can be brought to the same length without tools. The side and rear stop can be adjusted without tools. Using the snap-in hole pattern program bar, any individual hole patterns can be scaffolded with a flick of the wrist. Specifications up to 50mm stack height Speed control and stroke cycle control 3 - 14mm Paper Drill Bit up to 42mm hole distance to the blade edge 7 - 293mm hole spacing over sliding table Robust sliding table with hole pattern program strip  ...

Guillotine Ideal Model 4810A Year 1989 Cutting length 475 mm Details Manual adjustable clamp Electric cutting Manual backgauge adjustment Ruler read/out 2 new knives, 1 used single phase, 240 volts

Cutting machine Polar 137E B.J. 1996 complete with two lifts

Qty. 1 Second-hand paper mill for production of light weight coated paper (LWC) Mfc.: Valmet Built: 1987 Capacity: 270 000 T/annum Average basis weight: 52.1 g/m2 Trimmed witdth: 8.26 m Basis weight: 39 - 65 g/m2 Speed: 1650 m/min Two Valmet JR-1000 winders 1st online coated LWC-line Web width: 8.35 m Speed: 1650 m/min Scope of supply: Short circulation Headbox and Wire section Press section Pre-dryer section Breaker stack calender and coating stations

Cardboard press, paper press Horizontal version bale size 60x70x70 cm with cutting device Make HSM 14 to Presskraft older model year unknown. Very comfortable due to Insertion shaft and cutting device. The finished bale can be placed directly on a Pallet can be pushed out. Has a large hydraulic agregat runs very fast and quiet. Sale without guarantee/liability or warranty for VB 3.600,--€ plus VAT VAT. Peter Knam Sweden 7 D-88085 Langenargen peterknam.de 07543/4242

Digital program Air table 2 Sides tables Cleaned, checked and tested

Laminator - paper over board Make Tùnkers Model S-1100 Year ///// Workingwidth 1100 mm As standard laminator Automatic feeder - register - full surface gluing - manual feeder into automatic lamination station - pressing belt - delivery on table As spot label gluer Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt - pressing belt - delivery on table Both options ? Okay ! Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt OR manual feeder into automatic lamination station - pressing belt - delivery on table Delivery delivery on a table Condition example machine sold throughly refurbished by us almost consessionless - this machine is eventually obtainable from the USA - all new pneumatic - all new shafts for the pressing station - all bearings replaced - all new belts - all ...

Paper drilling machine Nagel Citoborma 280 AB

Control Board A1

Air table 2 side tables 3 knives Photo cells Program

Vemag mobile portioning machine with paper interleaver, model: MMP 220, number: 2200020, year of construction: 2005, 220-240/400-460/575 V, 3 Ph, 50/60 Hz, 3.5 A, 1.5 kW, weight: 335 kg, plastic belt, belt width: 250 mm, total dimensions: 2000 mm x 600 mm x 1630 mm.

We can offer the following Flat- and satchel paper bag machine. Producer : Biagioni / Castaldini ( Italy ) Type : F 100 Year : 1995 Printer : 3 colour ( 4 colour unit ) Bag width : 80 - 300 mm Cut off : 180 - 720 mm With : Window unit With : 20 form plates With : 40 printing cylinders

Speed: 18m/min, heating output: 1.35kW, length: 2750mm, width: 976mm, weight: 650kg, including documentation, spare parts and accessories.

Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW.

Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual.

Drill rotational speed: 200-2500/min, drill diameter: 3-8mm, drill length: 30-80mm, max. stacking height: 40mm, connected load: 4.6kW, with documentation.

2 Head Paper Drilling Machine

Jogger with Pressing Roller

cutting machine Manufacturer: Polar-Mohr Model: 90EL Price: on request

Cutting machine - CT - 115 ECE Cutting width 92 cm Year of prod. 2014 Perfect condition To watch - out of production - possibility of connection price: on request

CUTTING MACHINE - WOHLENBERG MCS-2 Cutting width 92 cm Year of prod. 1984 AUXILIARY TABLE SHAKER Very good condition Connected, can be viewed and tested - out of production price: on request

Cutting Emashine Ideal 7228-95 EC3 Year of construction 2004

Qty. 1 Second-hand paper mill Mfc.: VOITH, Mitsubishi, Johnson, MAN Turbo, Reitz, Quattroll Built: 2005, 2006 Type of Head Box Masterjet F with Modulejet No. of Top Former: Voith Duo-d Pond Width: 3,700 mm Wire Width: 3,850 mm Max. Sheet Width: 3,363 mm on Reel Type of size Press: Metering Size Press Speed Sizer” Voith Dryer Section: Pre Dryer Cylinder 30 pcs After Dryer Cylinder 8 pcs Paper Grade: Printing & Writing Paper Basic Weight: 60 ~ 260 gsm (main 70~120 gsm) Max. OP Speed: 800 m/min at 80 gsm Product capacity: Avg. 271 ton/day at 80 gsm

Equipped with: Digital computer program with TFT color screen Security photocells Central table with air Side tables with air - Perfecta BSH 3 pile lift ( 2011) - Baumann vibrating table with air removal roller - Unloader Perfecta BA 3N ( 2011)

Single head Floor model with foot pedal heavy design adjustable side stops Several paper drills Drill holder 380 volts / 0.55 kW / 1.7 A

Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A

Paper drilling machine Dürselen Corta PB 04 N; good condition; cleaned and tested; 4 drill heads; drilling lubrication and cooling; Speed regulation; Speed table stroke adjuster; Max. Stacking height 50mm; Insertion depth behind drill 42mm; sliding table; Hole spacing 31.7-293mm; optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind drillers 42mm; sliding table; hole distance 31.7-293mm; for oiption with 7xFilofax drilling head.

Cutter Ideal 4850-95EP year of construction 2007 from Demozal. In very good condition!

Paper drilling machine Hang 106DTK4, machine number 62407, in good condition, immediately available

Guillotine Make Ideal Model 4700 Year 2001 Cuttinglenght 470 mm Stack height 80 mm Space behind the knife 470 mm Available direct

Producer : W&H Type : Matador 50 Bag width : 70 - 500 mm Cut-off length : 180 - 780 mm With : W&H QMS 992 – 3 colour printer

Side Tables, Light Bariers, Chromed Air Table, Program, Standard Accessories