continuous mixer used for sale

There are two identical Videojet 1550 available, length: 382mm, width: 361mm, height: 553mm, weight: 22kg, with extensive documentation, on-site inspection is possible.

There are two Domino A400 available, were not used for eight years, with ten printing heads.

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Protec development machine (wet) Optimax

Protec development machine (wet) Compact 35

Protec development machine (wet) Compact 35

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Balance range: 300 g Temperature range: 10° - 40° C Mains connection: 220 V, 50 Hz

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Used net belt oven for pita bread JAGUM - especially for pita bread and other Arabic breads - MITSUBISHI S500 controller -Steel - Condition: Good, ready for immediate use Specifications: - Connection: 10 kW, 380 V, 50 Hz - Dimensions: L 1.200 x W 800 x H 700 mm - Weight: 150 kg Visits and test runs are possible by arrangement.

Seehr well-preserved solid wood panels - gluing system TYPE PROFIPRESS P 3500-2 for max. wood length 3.5m Loading from the right in u-shape Year of construction 2003 General overhaul 2018 since then only test run Machine dismantled, on request with assembly against payment Seehr good condition immediately available

Used zinc rod making machine for sale. Model No.: FAH Year of construction: 2010 Price: 90,000.00

AGFA ADAMAS 125 COU ( Clean out unit ) Washer for Adamas printing plates. Excellent condition, little used. online version without tables. Stock! AGFA ADAMAS 125 COU ( Clean out unit ) washer for Adamas processing. Excellent condition, was very rare in use. Online version without infeed and outlet. Processor is on stock and can be inspected on appointment.

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Continuous controller, heating controller KIEBACK & PETER KSY1/100F 24 V ( 24V ) ambient temperature: 0...50°C New ! Dimensions: 150 x 130 x 45 mm

Equipment carrier for E-Line continuous-row system TRILUX 7650 +LLWS IS 345 MX Highbay article number: 6887300 220 - 230 V AC 50 - 60 Hz with 2 highly sensitive pyrosensors Presence area: max. 30 m x 4 m ( radial, in the longitudinal direction of the gear tray of ) permissible mounting height: 4 - 14 m New ! with documents ! Dimensions ( gear tray ): 740 x 95 x 100 mm Dimensions ( packaging ): 780 x 160 x 130 mm

Gear tray for E-Line continuous-row lighting system TRILUX 7650 +LLWM IS 3360 MX Highbay article number: 6887400 220 - 240 V AC 50 - 60 Hz with integrated LiveLink WiFi control unit LiveLink WiFi Article number: 6565400 with integrated LiveLink WiFi Sensor Presence range: max. 18 m in radius permissible mounting height: 3 - 14 m New ! with documents ! Dimensions ( equipment carrier ): 740 x 95 x 100 mm Dimensions ( packaging ): 780 x 160 x 130 mm

Gear tray for E-Line continuous-row lighting system TRILUX 7650 +LLWS IS 3360 MX Highbay Article number: 6887500 220 - 230 V AC 50 - 60 Hz with integrated LiveLink WiFi Sensor Presence area: max. 18 m in radius permissible mounting height: 3 - 14 m New ! with documents ! Dimensions ( gear tray ): 740 x 95 x 100 mm Dimensions ( packaging ): 780 x 160 x 130 mm

Dear interested party, PLEASE READ THE FOLLOWING TEXT CAREFULLY. Yes, it's a lot, but it's important and usually answers all the questions ;) A new industrial continuous furnace from the manufacturer G.Maier from 2022 is offered, the continuous furnace is still originally packaged for shipping. The exact technical data can be found in the pictures, further technical data and information are available on request. The new price at that time was around 240,000 euros NO EXCHANGE OR RESERVATION. The items offered here are in used condition. The articles are without guarantee, warranty and liability for material defects and are handed in as they "stand and lie". Everything we know about the item is listed in our offers. We do not have any further pictures or information.  ...

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Mecalux roller conveyor roller conveyor continuous weighing scale 1050-735-650 RA1913 Make: Mecalux Roller width (RB): 650 mm, Steel rolls Nominal/outer width (NB): 735 mm length: 1050 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s including scale display, 6 Outputs for controling and measurement data forwarding to PLC Measurement accuracy: 50 g Scope of delivery: with supports Optionally available: Side guides on one-sided or both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1050 Nominal / outside width in mm: 735 Roll width in mm: 650 Roll division in mm: 75 Driven: YES sco ...

Stuffer continues with vacuum of the brand TECNOTRIP model EC 4 N. Maximum filling capacity up to 3500kg/h. Filling hopper capacity of 250 liters. Built in stainless steel AISI-304 in its entirety throughout the passage of food product. Includes different sets of funnels of different calibers. Buch vacuum pump of 23 cubic meters.

Koening KTW 863 ES Printing Plate Processing Machine; Condition as is; Working width 860mm; 3 brushes; suitable for waterless printing plates such as Torray. Plate processor Koenings KTW 863 ES; condition as is; working width 860mm; used for waterless plates like Torray.

Fuji Quartz III 125 Printing Plate Processing Machine; good condition; cleaned and tested; Inlet width 1250mm, min.200mm; Panel length max.1500mm; Refrigerator. Plate processor Fuji Quartz III 125; good condition; cleaned and checked; working width max.1250mm, min.200mm; plate lenght max.1500mm; Chiller.

Continuous checkweigher: • Specially set up for aerosol cans/bottles Ø 23 mm • Belt run from right to left • Load cell SW-D-FS with 2 tracks (2 objects are weighed simultaneously) • Passage with cycle star for object Ø 23 mm • Weighing range 0.1 - 500 g • Capacity max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Without infeed conveyor up to cycle star and outfeed conveyor between cycle star and infeed Camera box Coding station: • Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) • Camera control object bottom • bad ejection camera/weight with blowing nozzles • Connection 115/230V/50/60Hz Scale has worked together with aerosol filling/sealing unit (our item no. 13-0102).

• Set up for bottles • Throughfeed with indexing stars for object diam. 24 and 29 mm • Without conveyor belt • Weighing range 2 - 500 g • Capacity max. 200 weighings/min • e=d 0.1 g • Passage from left to right • Paper printer • Bad ejection by pneumatic pusher • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Calibrated until 2014 • Height adjustable • Connection 115/230V/50Hz

Short cycle press, short cycle press system, panel press, gluing press, veneer press, adhesive press, heating press, molding press, -Pressing area: 3810 x 1600 mm -Manufacturer: Wemhöner, heatable veneer press type VOF2-295/2 -Control: Siemens S5 -Drive: hydraulic -Number of press cylinders: 8 pieces -Pressure pressure: 295 t -Pressure: max. 60 N/cm² -Plate heating: gas burner heat exchanger via thermal oil (max. 130° degrees) -Infeed conveyor belt: 1600 x 5000 mm -Outlet roller conveyor: 1600 x 5000 mm

BD Plast continuous flow filter changer. Hourly capacity of 150kg recycled PET Machine purchased last year and for unforeseeable reasons never used. It is still in its original packaging. The machine can be inspected. Technical information in the photos.

Agfa Elantrix 125 SX Plate Processor; good condition; cleaned and tested; suitable for thermal slabs; Max. Panel width 1250mm, min.200mm; Min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling; including Elantrix ST 125 SX plate stacker with panel trolley. Plate processor Agfa Elantrix 125 SX; good condition; cleaned and checked; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; with plate stacker Elantrix ST 125 SX and trolley.

Width 125 cm Year of construction 2018 Development machine Agfa Arkana 125 Delivery date: immediately Price on request. We deliver and install worldwide!

Used Cryogenic Freezing Tunnel LINDE, Type: Cryoline L8 -120 - LINDE control type: LR-230 - Length: 8 m - Width: 2.10 m - Height: 2.50 m (when open) - Length of wire conveyor belt: 7.3 m, width: 1.21 m - Powered by liquid nitrogen Viewing and other dates possible on request.

Housing for LED permanent luminaire WERMA SIGNALTECHNIK BWM 12-24VDC GN article number: 890 220 55 suitable for operating voltage: 24 V D Degree of protection: IP65 Diameter: Ø 150 mm Height: 168 mm Depth: 154 mm New, with pads ! Dimensions ( packaging ): 155 x 155 x 165 mm

Signal tower WERMA SIGNALTECHNIK LED continuous luminaire 24VAC/DC RD Article number: 843 100 55 Buzzer element continuous/pulse 24VAC/DC B article number: 844 118 55 connection element BWM 12-230VAC/DC BK article number: 840 085 00 bracket for wall mounting BK article number: 960 000 02 Operating voltage: 24 V AC / DC Degree of protection: IP54 New ! Dimensions: 220 x 85 x 70 mm

-Liebel continuous scale -Type: LWS 1400

Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2012 Electric data: 24V Interroll, 220-240 condition: very good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 910 Roll width in mm: 600 Roll division in mm: 80 Driven: YES scope of delivery: including supports without side guides For individual, professional advice, simply contact us. ...

1 ARIOLI continuous washing machine type V21, year 2001, roller width 200 cm, working width 180 cm, 5 washing boxes, inside fabric capacity 30 m each box = 150 m

General SKU279U510 LocationBarneveld MakeEscher Wyss TypeFTK 135/450 No.2710214 Year of construction1980 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,7 m Weight2000kg Floorspace3,8x1,03 mFluid bed dryers continuousEscher WyssDryers > Fluid bed dryers continuousBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU317T816 LocationBarneveld MakeVentilex TypeFBD-4,5 Year of construction1999 Main Features MaterialStainless steel Motor3 KW Surface4.5 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface4,5 m² Bed sizes5000x900 mm, 5000x1200 mm Product inletØ250 mm Number of sections:2 Motor3 kw, 3x380 Volt (EExe II T3) Capacity600-2260 kg/hr (nom. 1750 kg/h) Max. temperature80-125 °C MaterialStainless steel 1.4435 (316L) Information Mounted on mild steel framecheck Floorspace5,5x1,4 m Total height3 m Weight3200 kg Extra SpecificationsHeating medium: steam, 5 bar Cooling medium: cooling water, chilled water 5-7 °C Pressed air: 5-6 bar, water and oil free with: wet scrubber/condensor: Ø 1000 x 3300 mm, Inlet flange: Ø 350 mm, Outlet flange: Ø 350 mm, 1-full-cone spray nozzle (capacity: 7 m³/h at 2 bar), 3 inspecion covers: ...

General SKU308T739 LocationBarneveld MakeAllgaier Werke TypeWS-GT-0,75 No.280 Year of construction2004 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information CEcheck With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

General SKU300P640 LocationBarneveld MakeNiro (manufacturer plate is missing) TypeFlex-XE-060-2/1:0 Year of constructionUnknown Main Features MaterialStainless steel Motor0.55 KW Surface1.4 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,4 M2 Bed sizes1900x750mm Product inlet600x450mm Product outlet330x200mm Number of sections:3 Air inletdia. 310mm (3x) Air outletdia. 500mm Vibro motor3 pcs Motor0,55 kW 230/400 Volt MaterialStainless steel Information Floorspace2,8x1,6m Total height3,6m Weight2000 Kg Extra SpecificationsThis is a Conti Fluid Bed Dryer/Agglomerator (Granulator). The powder flows inside in a sort of zig-zag pattern, guided by internal baffle plates and supported by accordingly directed Conidur bottom sieve plates. Therefore the machine is much compacter and not as long and narrow as it would be without z ...

General SKU224S098 LocationBarneveld MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 No.43164 Year of constructionUnknown Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel Information Mounted on mild steel framecheck Total height3,2 M Weight1800 Kg Floorspace4,7x1,6 MFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKULU004 LocationBarneveld MakeNeuhaus Neotec GmbH D-27777 Ganderkesee TypeContinuous Fluid Bed Dryer FB 35/3 Static, non vibrating FBD No.N3662-0001 Year of construction2013, reconditioned in 2021 Main Features MaterialStainless steel Motor18.5 KW Surface1.5 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,5 m2, Conidur plate type Bed sizes430x4190mm Product inletDia: 150mm Product outletDia: 150mm, through rotary valve type ZZS Number of sections:3, Length per zone 1520 / 1460 / 1460mm Air inletDN200 Air outletDia: 200mm With fan(2x), Inlet- and exhaust air fan, make Ventec Köln, type VHR-355-224MB. Motor1x 15kW, 400/690Volt, 2930rpm & 1x 18,5 KW, 400/690 Volt, 2930rpm Capacity4350 Nm3/h (total inlet air volume) / max 52 kg/h water evaporation With dust filtercheck Heating unit (steam)(3x), make Caldarius Appar ...

8,10,11 and 12 Fold Gears In perfect condition condition Can be seen in production in working condition For sale as we stopped doing continuous form and Z-fold work

- Capacity: 15000 l/h - With 3 dosing pumps for fining products - New, freely programmable control with touchscreen - Machine in very good condition

Description: With office equipment content. Approx. Onsite Dimension. (l x w x h): 350 x 1,000 x 800 mm, weight approx.: 40 kg

Continuous Level Sensor IFM ELECTRONIC LR8000 LR0000B-BR34ASPKG/US 18 - 30 V DC Reach: 2 mm Threaded connection: G 3/4 ( inch, male thread ) connection Device plug: M12 x 1, 4-pin Material: Stainless steel with probe rod for level sensors: E43205 LR PROBE L700 Length: 700 mm Diameter: Ø 8 mm Material: Stainless Steel New ! Dimensions (sensor, without probe rod): 100 x 63 x 50 mm Dimensions (packaging): 750 x 65 x 15 mm