concrete mould used for sale

ID2652 Putzmeister HM25 AZ 24/100 year approx. 1995 approx. 1210 hours/hours Mobile Concrete pump Putzmeister HM25 AZ 24/100 on tracks (25 t Atlas undercarriage), approx. 24 m boom, radio remote control, wired remote control, approx. 60 -70 cbm pump capacity, Iveco/Fiat 6 cylinder suction engine Mobile concrete pump Putzmeister HM25 AZ 24/100 on tracked suspension (25 t Atlas undercarriage), approx. 24 m design, radio remote control, wired remote control, approx. 60 -70 cbm pumping capacity, Iveco/Fiat 6 cylinder naturally aspirated engine

One semi new ELECTROWELDING MESHLINE from PRECUT BAR, from Ø 4 mm up to Ø 16 mm diameter. Mainly exesting of: Line Wire Deposit Table SEmi automatic line wire feeder Welding machine with 2.500mm width Cross wire magazine Linear pulling out device Stacking unit for meshes up to 6.000mm of length

ID1855 Elba RSK 30C – Star Scraper year/Year of construction 1992 Elba Radialschrapp automat RS/M 40, 17,3 m, 4-part lattice boom for scrapers Elba RS/M 40 radial scraper machine, 17.3 m, 4-part lattice boom for scrapers

Capacity 2000 liter Elektromotor Type: F200KL02 Power: 40kW N: 2900 1/min

Hydraulically operated tilting vibration table for products up to 5 m. long. Type v20 vibrators max speed 6000rpm. Hydraulically operated beltfeeder. Hydraulically power packs. Pneumatically operated gates. PLC control system with monitor and memory for 100 different mould settings. Demoulding crane. Transport system consist of 2 lanes and 10 units of chain stands. PLC control system 70 steel pallets for a product area of 5000 x 1,125 mm and a load of 3500 kg. Amexpo Consult Merkurvej 31, 9370 Hals Denmark Mobile: +45 25291017.

Used multi-layer paver Zenit 844 Built in 1993 inclusive: 1 piece concrete mixer 750 l Teka 1 piece concrete mixer 500 l approx. 12 pieces of used moulds approx. 100 production pallets Used concrete multilayer machine Manufacturer: Zenith Type: 844 Year: 1993 including: - 1 pcs 750 liter mixer Teka - 1 pcs 500 liter blender - about 12 moulds - about 100 pcs production boards

Precast concrete plant Complete with mixer & mixer. Machines Manufacturer: FIBO With approx. 40 tables 5500 x 3200 mm 6500 x 3200 mm 7500 x 3200 mm Not yet dismantled. Location Lower Saxony Net/export price 290.000,-- Euro I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net and negotiable! Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Goldman +49 173 6242 600 (also WhatsApp)

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle

One used METAX cutting line from Peddinhaus for bars up to 40mm

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg

From insolvency: Wacker Neusson CT 36 Year of construction 2019 Four-stroke Honda GX 160 915mm working width 73kg net weight

TECHNICAL SPECIFICATIONS Manufacturer: LIEBHERR Description: Semi-Mobile Concrete Batching Plant Type: Mobilmix 2.25R DW Year of construction: 1998 Mixer Nominal Size: 2.25 cbm Throughput (at 30 s mixing time): approx. 100 cbm/h Number of cement silos: 3 pcs. Cement silo capacity: 3 x 80 t (1 double chamber) Number of cement augers: 4 pcs. Pocket row silos: 6 bags (4 x 17.5 cbm, 2 x 35 cbm), Capacity of row silo: 140 cbm Concrete discharge height: 4.0 m Weighing belt maximum load: 6,000 kg Cement scale maximum load: 1,200 kg Spirit level: 600 kg Additive dosage: 25 kg Control: LIEBHERR Litronic (in container) Heating system: Heating oil Recycling plant: FMW Operating voltage/frequency: 400 V / 50 Hz

A used ELBA scraper is offered. Type: RS/K70, Built in 1991. 13m boom, semi-automatic and fully automatic.

TBL SREC 12 - residual concrete recycling plant - COMPLETE - with STETTER RA 12 Washing drum factory new 0.0 operating hours with guarantee including control unit including feeding table Includes 3 submersible pumps (1 piece submersible pump, for truck mixer washing pipe 2.2 kW, 1 submersible pump for returning the recycling water to the washing drum 2.2 kW, 1 submersible pump for draining the recycling water to the water dosing hopper of the concrete mixing plant 3 kW) Washing capacity for normal concrete 12 m3/h Washing capacity for normal mortar 5 m3/h max. particle size 63 mm Separation cut 0.2mm Rinse water volume (adjustable) 7-12 m3/h Rinse water connection for washing drum DN 50 Drain pipe DN 200 Water content of the drum (fill level) 2 m3 Washing drum follow-up time (adjustable) 20 min If required, including delivery, assembly and commissioning Pri ...

1 Gebr. Mat Cutting Machine Reinforced design up to single rod 12 mm Passage width 3 m Weight 645 kg

Description: Power supply: 230V, 50Hz Power: 2000W Vibration frequency: 260 - 283 Hz Mallet length: 6 m Poker diameter: 48 mm Electric drive Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 15 kg

Description: Power supply: 230V, 50Hz Power: 2000W Vibration frequency: 260 - 283 Hz Mallet length: 6 m Poker diameter: 48 mm Electric drive Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 15 kg

Description: Power supply: 230V, 50Hz Power: 2000W Vibration frequency: 260 - 283 Hz Mallet length: 6 m Poker diameter: 48 mm Electric drive Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 15 kg

A used concrete- /mortar mixing plant fully functional / ready for use including ORIGINAL DOCUMENTATION Manufacturer: WELZOW Type: BAB 500 Year of construction 1976 Output: 30m3/h Mixer: Pan mixer, Welzow, hardened concrete output 0.5 m3 aggrgate feeding by draigline scraper / WELZOW Dosage: Aggregates with skip weighing Cement by dosing hopper Water Control: WELZOW Silos 2 pieces AVAILABLE IMMEDIATELY LOCATION: EASTERN GERMANY Price on request Offers and prices are net ex location. Subject to prior sale, errors and/or misrepresentations reserved, without guarantee and/or warranty, sold in AS IT - IS IT condition - lying and/or standing

A Used Concrete Batching Plant Manufacturer: X-tec Germany Type: XMA 100 Year of construction 1996 Capacity: approx. 50m3/h Production to date: approx. 500,000 m3 Mixer: Twin Shaft Mixer (SIMEM 3000S) Belt Loading Including feeding system for row silo Row silo: 5 boxes, 162m3 volume ( 3 x 54m3, 2 x 27m3) Weighing belt: 5000kg Cement scale: 1000kg Spirit level: 500kg Additive weighing: 3 x 30kg Cement silo: 4 pieces ( 2 x 60 tons + 2 x 30 tons) Screw conveyors: D=273, L= approx. 10m Control: Dorner Batch (2015) Location: West Germany AT CALL Price on request Offers and prices are net ex location Subject to prior sale, Errors and/or misrepresentations excepted, without guarantee and/or warranty, sale takes place in ACTUAL condition

An overhauled (reconditioned) mobile concrete batching plant Incl. guarantee Manufacturer: Stetter Type: M1 TZ Overhauled in: 2024 Power: 56m3 aggrgate storage / compartment batcher: 4 X 10 m3, total 40m3 Mixers: pan mixer , Stetter T 1000, compacted concrete output 1.00 m3 per charge Dosage: Aggregate wheighing in the skip bucket 2500kg Cement scale 500 kg water dosing hopper 250 kg Additive scale 1 X 12.0 l Control: STETTER MCI 460 (optional GEDIS IBS 33 W possible) operator stand in a office container installed Cement silo: Optionally possible cladding/housing: Optionally possible Delivery time: according to agreement (immediate available) Delivery free construction site possible assembly and commissioning possible by us Price on request Offers and prices are net ex location. Subject to prior sale, subject to errors and/or misrepresentations, without g ...

Paver, made Zenith 913, incl. 4 moulds for: - Hollow block 49/ 17.5 / 17.5 cm - Hollow block 30 / 24 / 17.5 cm - Hollow block 36/ 24/ 17.5 cm - Hollow block 36/ 24 / 23.8 cm The machine travels on triangular rails

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Description: • Concrete mixer truck • Spanish registration number: 3027 DBK • Frame number WJMJ3JRS00C132712 • IVECO CURSOR D-F3BE0681GB engine: 6 cylinders, displacement 12882 cc, power 280 KW • Maximum total weight 32000 kg, death weight 13972 kg • Mileage 399905 km according to the counter • BARYVAL ANN-10/01 concrete mixer: serial number 14665, capacity approx. 10 m³ • This vehicle is delivered with only one set of keys • Ownership change costs will be paid by the buyer • MOT certificate costs will be paid by the buyer • The buyer is responsible for passing MOT in order to circulate in Spain • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 9,600 x 2,500 x 3, ...

Description: MESSERSI P4-F4 Self-Loading Concrete Mixer Truck no. 212V/003 5.196 hours ,according to counter Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,560 mm, weight approx.: 3,500 kg

MAS 3a block making machine for paving blocks, hollow blocks and kerbstones. Board dimensions X/Y/Z: 1200mm/1100mm/50mm, production height min./max.: 50mm/330mm. 80x transport racks, 1700x base boards: dimensions X/Y/Z: 1200mm/1150mm/50mm. Bucket conveyor with Rekers drive and tipping drive: Bucket capacity: 1850l. 2000x pallets: Dimensions X/Y: 1000mm/1000mm. Forms: Concrete blocks: 36.5, 36.5 Z, 30, 24, 17.5, 11.5, 1.5 NF, NF. Expanded clay blocks: 36.5, 36.5 Z, 30.5, 24, 11.5. Lawn edgings: 5/25/100, 5/30/100. Kerbstones: 8/25/100, rectangular paving blocks: 10x10, 10x20, 20x20, 20x30, 30x30x8 cm, 20x20x8 cm without chamfer. Pavers: 6-8-10 H, 8er S, 6eck 7cm. Planting rings: small, large, oval (24x45x20). Special stones: lawn grids, filter stones. Including all accessories/conveyor belts etc. Documentation available. On-site inspection is possible.

Form tester MAHR MMQ 40 5440057 Test diameter: max. Ø 420 mm R axis: max. 180 mm Z-axis: max. 350 mm Pmax: 60 VA Operating voltage: 110 - 230 V 1AC 50 / 60 Hz 2x Length Gauge T6W 5400054 Form-PC-Interface 7023988 Form-PC FUJITSU SIEMENS CELSIUS W340 with monitor, keyboard, technical documentation and various connection cables used, tested ! Dimensions ( form tester ): 650 x 460 x 750 mm Dimensions ( Form PC ): 510 x 210 x 390 mm Dimensions ( assembled ): 1500 x 830 x 1600 mm

injection molds set for the production of house facade, a total of 4 pcs of large molds with a total weight of 12 tons

Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )

CAP.: 10 000 BTLS/H OF 1.5 L,

for the production of pillow candies Power 10 - 250 kg/h, depending on type and size of the candies

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Four nearly new moulds for garden wall and fence.

Mouldingpresse The MP / 3E is a hydraulic press for the production of Clayprofilen such as rubber seals, protective, decorative or chrome strips. By inserting an appropriate form template in the bolt head, almost any profile can be produced up to a diameter of 65 mm. Manufacturer: Wadhwa Type: MP / 3 p Year of construction: 1995 Temperature controller Speed controller Via a rotary control a stepless adjustment of the speed is possible heated sealing head The built-in heater in the bolt head is adjustable Foot switch Weight: 125 kg Fully functional All information without guarantee Sold only to businesses

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

SPINDLE MOULDER Type SAC SUERI TS 110 motor power Hp 5,5 volt. 380/50

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:

GLIMEK Long Moulder MO-881 exhibition machine, brand new condition, year of manufacture: 2018 weight range 30 - 1.800 g capacity range up to 3.000 pieces per hour working width up to 650 mm foldable second pressure board for easy cleaning pressure board adjustable in height pressure board with adjustable side guides machine movable on castors curling net made from stainless steel infeed hopper with centering device adjustable roller spacing three pairs of rollers made of food-safe plastic

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away

Netstal injection moulding machine Type: Synergy S3000-1700 / 900 2 component control:-year of production: 2000 Clamping unit Clamping force t: 300 gap mm: 0-700 Holm dimension mm: 720 x 720 min/max height mm: 400-750 Plate size: 1127 x 1060 injection unit Screw diameter mm: 70/50 injection weight gr: 916 / 377 Injection volume cm 3: 954/393 spray pressure bar: 1801/1840 Dimensions and weights Dimensions Lxwxh m: 8.8 x 2.3 x 2.3 machine weight kg: 23,300/1,500 Miscellaneous Neureder robot rotary table with servo motor magnetic disk on the nozzle side cascade control 2 core cable robot interface Gasinjection system

The list of equipment for sale from molding line: 1. Moulding Machine HSP-2D (22kW, 70f / h) 2. Lifting table 3. Pressure plate 4. The dispensing sand tank