We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,311 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
used
Injection unit Screw diameter: 35 mm Calculated injection volume: 168 cm3 Material pressure: 2000 bar Closing unit Closing force : 1000 kN Min. mold thickness: 320 mm Other Commissioning: 2006 Tonnage: 100
used
Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1600x1530 Clearance between columns (hxv) [mm] 1120x1100 Min./max. mold height [mm] min 1100 Injection unit Screw diameter [mm] 135 Injection volume [cm3] 8588 Injection weight [g] 7807
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).
used
This injection moulding machines was manufactured in 2001. The Ferromatic K-Tec 350 S/2F is known for its robust performance and reliability, suited ideally for a variety of injection moulding applications. If youâre considering enhancing your production capabilities, the Ferromatic K-Tec 350 S/2F machine we have for sale could be an excellent fit. Contact us for more information.
used
This HYUNDAI 450 injection moulding machine was manufactured in 2001. It features a screw diameter of 76 mm, an injection pressure of 1840 ã/ã , and a mould clamping force of 450 tons. The machine has a total power capacity of 88.18 kW and a hydraulic oil reservoir with a capacity of 900 liters. This is an excellent opportunity to acquire the HYUNDAI 450 machine we have for sale. Reach out for more information.
used
Description Electric charge Working hours: 6.300
used
used
used
Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net
used
used
used
MARTIN T26 swivel spindle milling machine very well maintained, in good facilities: Swivel angle: from +/-45.5 degrees, electrically adjustable according to LED display Digital dimension correction when the height is adjusted, the correction factor for the swivel angle is displayed in the upper display Height adjustment: stroke 150mm, electrically adjustable according to LED display Speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, Quick-change system: Dornfix quick-change spindle with torque wrench electr. Pneum. Spindle blocking Comfort stop with mechanical indicators for overall adjustment and inlet jaw individually T2600 CENTREX protection T2601 control panel can be swivelled above T2621 table extension with extendable workpiece support T2635 Swivel device for milling stop T2628 guide strips in anodized design Type 1376 tenon cutting ...
used
Description working hours: 80000
used
used
Type 1B/1K-M length of workpiece. 5000 mm workpiece width. 300 mm Quontity of mortising: 180 mm working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 7500 Eur (EXW Jonava, Lithuania)
used
Description SERVO PUMP WITH BRUSHLESS DRIVE 6 HOT ROOM ZONES EUROMAP 67 INTERFACE COLORIZER INTERFACE BATTERY WITH 3 ADDITIONAL FLOWMETERS
used
Description EUROMAP 67 ROBOT INTERFACE
used
used
used
used
Description Machine available from February 2022.
used
Description magnetic planes
used
Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood 4 cutterblocks
used
used
used
Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition
used
used
used
Description ROTARY TABLE DIAMETER 1500mm MAXIMUM MOLD DIMENSION 400X400mm
used
Description Rotating Table Diameter: 1000 Table positions: 2 Hot channels: 8
used
Substructure painted Automatic machine with chain drive width: 450 mm Band height: adjustable Spray nozzles: 3 pcs. With pressure control Technically repaired
used
used
Description SILICONE PRESS Complete with REINHARDT-TECHNIK LSR 200 silicone pumping unit year 1998
used
WEINIG moulder model UNIMAT 17N with 8 shafts: -useful working measures 170x120mm -gimbal towing and pneumatic pressure -variable feed speed -top feed wheel before the 1st shaft -tandem feed groups in front of the 2nd and 4th shaft -2000mm long entrance plane -with SACOT automatic loader -manual lubrication pump of the table Tree layout: 1-under 2-right 3-left 4-right 5-above 6-under 7-above 8-Universal
used
Description 13 zone mold heating working hours: 3447
used
used
Description MANY LANGUAGES AVAILABLE
used
used
Description MAXIMUM MOLD DIMENSION 400X400mm MINIMUM ACTUAL MOLD THICKNESS 320mm MAXIMUM ACTUAL MOLD THICKNESS 479mm 2 WARM ROOMS 2 PNEUMATIC JACKS
used
used
Description MANY LANGUAGES AVAILABLE
used
used
Description increased floor
used
Description Rubber molding machine Working hours: 18.000
used
Description Rubber molding machine Working hours: 27.000
used
Description Rubber molding machine Working hours: 27.000
used