concrete factory used for sale

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

Rock Wool factory 16.000 t/y - Stone wool - Laine de roche - nearly new - for all products.2,5 tons Rock Wool per hour - Coppola Kiln, fired by coal - Rest on request. licence of Swedish System

Gnocchi factory 1. Cooking kettle Glass pro3, 500 l, tilting, mixing 2. Bin hoist for 200 bins feeding the former 3. Former Sandore NF 100c 8.5 kw 4. Feeding conveyor for vibrating Tunel 5. Vibration tunnel Sarp str 410 4.7 kw 6. Waste and water separator Sarp Filtro 7. Feeding conveyor for multi head weightier, z type 8. Platform for weigher 5000x5000 mm 9. 10 head weigher BVBA 01AAH-WS 10. Packer Tiromat BL-150 ET422N 11. Ready product conveyor

Volume flow: 6760m³/h, temperature increase: 128°C, rotational speed: 2670/min, connected load: 88.76kW, length: 2438mm, width: 1922mm, height: 2453mm, weight: 3.8t, including documentation.

mechanical clutch, multi-plate clutch ORTLINGHAUS KUPPLUNGEN factory no. 39 Shaft diameter: Ø 30 mm Wavelength: 82 mm 1 groove, width: 8 mm Number of clutch discs: 7 Clutch disc diameter: Ø 80 mm used, tested ! Dimensions: 85 x 82 x 82 mm

Used stainless steel CIP station. The CIP station includes: - 4 x 3000 L stainless steel tanks: fresh water tak, acid tank, alkaly tanks, hot water tank - 2x desinfectant tanks - 2 x heat exchangers for heating up returned water - 2 x pumps model gu30/30 and 1 x pump gh 20 - control cabinet with Siemens PLC - piping + valves + counters + senseor

mechanical coupling ORTLINGHAUS KUPPLUNGEN factory no. 88-14119 shaft diameter: Ø 90 mm Wavelength: 160 mm 1 groove, width: 25 mm flange diameter: Ø 440 mm bolt circle diameter: Ø 410 mm hole diameter: Ø 13 mm with thrust bearing and additional shift ring New ! Dimensions: 440 x 440 x 160 mm

mechanical coupling ORTLINGHAUS KUPPLUNGEN factory no. 89-15483 Shaft diameter: Ø 90 mm Shaft length: 160 mm 1 groove, width: 25 mm flange diameter: Ø 440 mm bolt circle diameter: Ø 410 mm hole diameter: Ø 13 mm with thrust bearing and additional shift ring New ! Dimensions: 440 x 440 x 160 mm

mechanical clutch, multi-plate clutch ORTLINGHAUS KUPPLUNGEN factory no. 20 20/236232/10 shaft diameter: Ø 55 mm Wavelength: 92 mm 1 groove, width: 16 mm Number of clutch plates: 7 Clutch disc diameter: Ø 143 mm flange diameter: Ø 160 / 110 mm bolt circle diameter: Ø 125 mm 4x threaded hole: M10 x 1,5, Depth: 15 mm New ! Dimensions: 160 x 160 x 92 mm

Description: Original lithium battery, for KLAMEL cordless tools Approx. Onsite Dimension. (l x w x h): 100 x 100 x 100 mm, weight approx.: 1 kg

Newtec batch weigher, type: PCB 2009, factory number: 3889, year of construction: 1997, weighing capacity: 5 kg, temperature range: 5° C - 35° C, 9 lanes, lane width: 165 mm, total dimensions: 1920 mm x 1250 mm x 1770 mm.

Sand feeding/mixing/reactors (modernized in 2007): Control system: Siemens S7, number of machines: 23. 5x Jöst discharge chutes, sand screen, mixer, Eirich UE 62 discharge unit, bucket elevator, reactors, twin-shaft mixer, various weighing belts and conveyor belts. Press plant (modernized in 2012): Control system: Siemens S7, number of machines: 6. 2x Atlas presses incl. table removal and stacking device, scraper, empty trolley platform and Semet turntables, Atlas blank transfer table, 2 press tools in use and 22 additional tools available, various conveyor belts. Hardening shop/steam boiler (modernized in 2015): Control system: Siemens S7, number of machines: 13. Dapf boiler standard burner Saacke, 9x hardening boiler Scholz with automatic condensate drainage, water treatment Grünbeck, condensate collection tank, low-pressure feed water tank, approx. 130 hardening scales. Packaging sy ...

SUMAB Smallest Automatic concrete plant SUMAB MINI The SUMAB MINI is a perfect match for you whether you produce concrete for your own project or need material to produce concrete elements. Technical details: • Easy to put it inside the building and build your concrete element factory. • Designed on a container frame. • 2 aggregate storages, • pan-mixer 500/300 liters. • Water tank 200 liters. • Automatic control of a plant: computer (20 concrete recipes). Concrete plants made by SUMAB are the definition of quality, durability and reliability. Our batching plant are made using Scandinavian technology and components from leading European manufacturers! We offer Scandinavian quality at the best price! If you need more information, you can visit our website, or send a request and we’ll help find the best solution for you!

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Autoclaved Aerated Concrete AAC Production Line, Porenbetonwerk, Aerated concrete plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

Type: GM1000 Motor power: 1,5/2.2 kW Glaistykl ė s diameter: 1000 mm Weight: 70 kg

Ready for use

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

Fresh concrete recycling plant BIBKO RAM 20/ used manufactory: Bibko type: RAM 20 YOM: 2001 Capacity: ca. 12 m³/h system washing trough, trough length 2500 mm separating layer 0,25 mm with discharge conveyor screw (new) overhauled/reconditioned and exactly aligned - gear reconditioned (overhauled) and sealed - all bearings are new - buckets and scraper exactly aligned - 1 pcs feed hopper / used - 1 pcs agitator (wastewater) with console / used - 1 pcs control unit / used -for the full automatic control of the complete plant - 1 pcs gallows-shaped pipe/ used Facility is fully equipped, clean and primed. The final painting according to customer's request. location: South Germany available: march 2024 offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like ...

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

WACKER concrete vibrator with bottle Converter Tech data: WACKER Germany FU 3/42/200/2 D you No. 206759613 with suspension transducer with 2 outputs and a shaker bottle Engine: 2.1 KW 380 V 2950 RPM 50 HZ gene: V 55 A 30 KVA 2.9 Hz: 198 Power consumption: 5.2 KVA 380 V 50 Hz vorfuehrbar live in the camp PROVIDER Machinery die GmbH 94094 Rotthalmünster, Germany registered since 2010 153 listings online & #57620;. REQUEST SEND Ladies and gentlemen, Please send us a quote for concrete vibrating machine WACKER m. bottle WACKER Germany FU 3/42/200/2 D you to. Thank you very much and greetings I'm dealer quotes for similar machines request send data protection

With PRO 500 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with PRO series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Used concrete block making machine Fabr. Henke / Masa with core and attachment Board size 1400 x 1050 mm stroke head countersunk head vehicle group packaging strapping Chambers in a diverse Formen.Mischanlage is complex, ZementsilosDie now can a ready state, but also to the present Site be continued. For more information, 0171 6232061 or via MailLonz - measuring and RegeltechnikBrunnenstrasse 22 65510 Idstein

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

TECHNICAL INFORMATION Manufacturer: AMMANN Name: Two-shaft continuous mixer Type: AMIX2_4CB Built: 2010 Continuous power: 180 cbm/h Gross volume: 4.12 cbm Net volume: 3.71 cbm Filling level: 0.64 Drive power: 2 x 45 kW Length inside: 2,400 mm Inside width: 1.910 mm Stirring circle diameter: 1,080 mm Axle spacing: 830 mm Weight: 7.700 kg Drive type: V-belts and synchronous transmissions SPECIFIC COMMENT - Mixing trough with electro-pneumatically actuated outlet valve (300 x 650 mm) - Stirring arms with honeycomb blades and screwed agitator arm protection - Automatic central lubrication unit with grease flow monitoring - Mixer camera - Little operating hours and wear - Plant is dismantled and cleaned If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis

Concrete removal robots for horizontal flat milling Consisting of: Robot base suspension, with modular system up to 8 m, with integrated hydraulic system, with control unit (control bottle) with working device and attached lance console and jet lance 700mm electric motor

Boton roadpasetER BODO GOMACO Commander III Built 2004 General overhauled! 6800 h Factory overhaul Bohle Neu Three-piece , 3 x 1 m For track construction, sidewalk, etc.

We offer you here a concrete approach protection for purchase. Included in delivery are: Concrete collision protection, SECOND choice Material color: yellow Total height: approx. 1,300 mm Total width: approx. 540 mm Pipe diameter: approx. 32 mm Material thickness: approx. 3 mm Weight approx. 7.0 kg Notes: - This concrete protection is suitable as collision protection and impact protection for production areas, Warehouses, high racks, shelves and other areas of the company with freight and freight transport. - optical, effective demarcation General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request)  ...

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Contec Mini 15 - Concrete mixing plant Mixer M 500/300 liter Capacity 4 - 9 m3 Aggregate hoppers: 2 x 2.5 m3 on a stable metal frame Belts: 2 belts integrated and attached to the aggregate hoppers

Mobile ring trough mixer with 2 exchangeable mixing blades and 1 exchangeable side scraper for mixing smaller quantities of concrete.

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Pallet size 1.270 x 1.050 x 125 mm Production area Max. 1.240 x 1.000 mm Block height Max. 500 mm Min. 50 mm Year 2006 With Spare parts (pumps, motors etc..) With 5 pieces molds and 300 pieces metal pallets Machine maintained than dismantled

1 pcs. mixer gearbox (reconditioned - AS NEW) for Liebherr ZE 3000/4500 Year of construction: 2019 reconditioned in 2020 immediate available

TECHNICAL SPECIFICATIONS (Cone Mixer) Manufacturer: KNIELE Name: Cone Mixer Type: KKM 2000 / 3000 Version: with bevel gear Year of construction: 2008 Output quantity: 2.0 cbm Capacity: 3,000 l Three-phase motor agitator inside: 45 kW Three-phase motor agitator outside: 37 kW Mixer lining: Ceramic Mixing system for ready-mixed concrete consisting of: - KNIELE Cone Mixer KKM 2000 / 3000 - Elevator system with bucket - Feeder scale - Cement scale - Water dosing system - 1 x 100 t cement silo (double chamber) - 1 x 80 t cement silo (double chamber) - 1 x 60 t cement silo (double chamber) SPECIFIC COMMENT - Aggregate storage for the most part no longer usable - Machines will be dismantled in the near future and ready for loading If you are interested, we can send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis

TECHNICAL SPECIFICATIONS Manufacturer: WECKENMANN Designation: Concrete distributor Version: Stationary, mobile Type: 1,500/2.0 Year of construction: 2000 Capacity (geometric): 2.4 cbm Capacity (hardened concrete): 2.0 cbm Longitudinal travel speed: 2 - 40 m/min Travel speed transverse: 5 - 20 m/min Number of sliders: 10 pcs. maximum grain: 16 mm Connected load: 15 kW Operating voltage: 400 V / 50 Hz Weight: 5,800 kg Essentially consisting of: - Main landing gear (bridge) - Transverse landing gear (cat) - Bucket with spike and distributor roller - 10 sliders with hydraulic slide width adjustment SPECIFIC COMMENT - Machine is dismantled, weatherproof preserved and ready for loading - Complete and functional - Continuous maintenance and servicing If you are interested, we can send you an offer with photos. EuroConsult Dimitrios Piretzidis

SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)

Our company offers the SUMAB E-12, which is a movable concrete block machine. The E-12 is a block machine that uses a technique known as egg laying,” where the block machine moves and produces concrete block products on the ground to dry – We offer the machine in fully/semi-automatic modes. With the SUMAB E-12, the following concrete products can be produced in an efficient way: • Hollow block stones • Solid block stones • Chimneys • Light weight blocks • Paving stones [with vibration table option] additional option Production capacity: For hollow blocks 400 x 200 x 200 mm ………. 1.200 blocks/h. For hollow blocks 400 x 200 x 120 mm ………. 2.000 blocks/h.

Mobile concrete batching plant, SUMAB K-60 Technical details: • 4 total storage tanks with 3.8 м3 each, with the possibility of increasing storages to 5 m3 • Pan mixer 1800/1200 litres, coated with 12 mm layer of special steel. • Automatic control for opening the damper supply for precast concrete. • 5 mixing arms. The special arrangement of the arms in the pan mixer allows all the parts of the mixer to be covered during the batch, which means that a high-quality concrete product is achieved. The K-60 Mobile concrete plant features a comfortable control cabin that allows for the automatic control of the system. The modern Siemens computer system enables you to produce over 100 recipes and types of concrete. You can print the specifications of any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Adva ...

Eirich mixer 1 x double room 22- 1500 liters, year of construction 1967, 1 x DEV 22 - 2500 liters, year of construction 1973, incl. 2 elevator tracks and various belts, SPS BIKOTRONIC, from location, immediately available

Used ground paver Manufacturer: Hess Type: BF 150 A Year of construction: 1985 Power: 19 KW Block making machine Manufacturer: Hess Type: BF 150 A Year of production: 1985 Power: 19 KW

Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation  ...

The unit is new and unsed. Please feel free to contact us should you require any additional information.

KVM 125/105 Block/Paving Plant complete 1999 NEW PRICE! KVM PLC control, Curing Rack System. Finger car systems. Elevator system 10 levels, Coloring system. 2 Moulds, Palletizer system, Skako 1125 L batching plant complete. Plant is in good condition and was shut down in 2020. The plant can be seen after appointment. We can assist with dismantling, packing and shipping. Amexpo Consult, Merkurvej 31, 9370 Hals Denmark. +45 29251017

KVM 62/80 Pavingstone machine, 2005. Hydraulic Powerpack, KVM PLC Control, Pallet size 900 x 750, Moulds. Machine was shut down in 2010 due to a merger between 2 companies. The machine has only been in operation for 5 years and is in very good condition. PRICE INCLUDES DISMANTLING. Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

Concrete block production plant complete Fabr. Locksmith type SP 3000 with core and attachment control Siemens S 7 Lifting ladder, vehicle group, racking system, sinking ladder, packer, strapping mixing plant various accessories. The plant is still in operation and can be visited in consultation with us.

MAN 32.322 chassis, year of construction 1993, 242,000 km, pump Putzmeister 17.50 m with radio remote control, good condition