con used for sale

Combination control FER / DMS KOMBI - START New ! Dimensions: 260 x 150 x 140 mm

Contactor SIEMENS 3TF54 3ZX1012-0TF10-1AA1 235 kW 690 V used, tested ! Dimensions: 210 x 200 x 150 mm

Contactor SIEMENS SIRIUS 3RT1 ( SIRIUS3RT1 ) 3RT1035-1BB40 2 x auxiliary contact 3RH1921-1CA01 22 kW 690 V used, tested ! Dimensions: 175 x 115 x 55 mm

diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m

Contactor SIEMENS SIRIUS 3RT1 ( SIRIUS3RT1 ) 3RT1035-1BB44 auxiliary contact 3RH1921-1HA22 22 kW 690 V used, tested ! Dimensions: 180 x 115 x 55 mm

Heating controller KIEBACK & PETER KWH-A 24 V ( 24V ) ambient temp.: 0...50°C New ! Dimensions: 150 x 135 x 100 mm

weight of the machine ca.:0,08 t dimensions of the machine ca.:9 x 13 m - Unused Truck Tarpulin, Colour Grey - 680 gr m²

turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min

turning diameter:650 mm turning length:1.500 mm chucking diameter:400 mm

Variable Frequency Drive, Inverter, with Operator Panel SIEMENS SINAMICS G110 CPM110 AIN ( G110CPM110AIN ) 6SL3211-0AB17-5BA1 Basic Operator Panel 6SL3255-0AA0-4BA1 0,0,0,0 75 kW Input voltage: 1 x 200 - 240 V Output voltage: 3 x 0 - Input V Dimensions: 150 x 140 x 90 mm

Universal Converter, Heating Controller KIEBACK & PETER KCU-A 24 V ( 24V ) ambient temp.: 0...50°C New ! Dimensions: 130 x 130 x 45 mm

Machine control, transistor pulse inverter, inverter SIEMENS SIMODRIVE 6SC 6101-4B-Z ( 6SC6101-4B-Z ) -3 x 6SC 6101-0FE00 1 x 6SC 6100-0GB12 1 x 6SC 6100-0NA21 Z = 3XA30+G10+N13+V12 used, tested ! Dimensions: 440 x 300 x 460 mm

Control cabinet with fan PAGUS 540 x 370 x 1090 mm ( 540x370x1090mm ) with fan RITTAL SK 3150 Dimensions cabinet: 540 x 370 x 1090 mm

length in total:3000 mm weight of the machine ca.:600 kg dimensions of the machine ca.:5150 x 900 x 1250 mm

Machine Control SIEMENS SINUMERIK 810 M ( SINUMERIK810M ) 6FC3541-0AC-Z 6FX1121-4BA02 6FX1128-1BA00 6FX1121-2BB02 6FX1132-8BB01 24 V DC 120 W used, tested ! Dimensions: 410 x 360 x 320 mm

CEE Socket, Socket, CEE Socket Combination BALS BAL 17827 ( BAL17827 ) 63 A-7h 480 / 500 V IP44 with fuse ! New ! Dimensions: 500 x 180 x 200 mm

weight of the machine ca.:340 kg dimensions of the machine ca.:2470 x 700 x 1300 mm

Roller block with Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Dimensions 600x500x500mm Condition: never used / new (5)

Control Panel, Control Panel, Operator Panel SIEMENS SIMOVERT OP1 6SE7090-0XX84-2FF0 SIE001G9611 New ! Dimensions: 190 x 85 x 40 mm

Control Panel, Control Panel, Control Panel SEW FBG31C-01 8222932.15 New ! Dimensions: 120 x 90 x 30 mm

Cutting capacity: 340 mm (round) / 340 x 340 mm (square) Power: 8 kW Power supply: 400 V / 50 Hz Hydraulic clamping Integrated coolant system Chip conveyor present

ul> Distance between heads: 3000 mm Diameter above the bench: 800 mm Lathe equipped with a fixed bezel Digital visualization MINILEXPRO 3-jaw chuck Manual tailstock Lots sold as is, unchecked, without tools or tool holders.

Consisting of Table 2x Vibration metering, type VD4 2x Wenrdel conveyor type BF 40-L 12 4x linea conveyor HLF 25-M-12

Roller trestle - Self-aligning - Left/right rotation - New control system - Foot pedal - Emergency stop facility Lifting capacity 20 t Workpiece diameter 1500 - 3500 mm Drum diameter 250 x 100 mm Feed rate 100 - 1400 mm/min Total power requirement 0.75 kW Machine weight approx. 2.5 t Dimensions LxWxH 2.5 x 1.5 x 1.5 m

Contactor SIEMENS 3TF50 3TF5022-0AM0-ZA01 55 kW 400 V used, tested ! Dimensions: 160 x 120 x 160 mm

Contactor SIEMENS 3TF48 3TF4822-0AM0 37 kW 400 V AC Control voltage: 220 V AC 50 Hz used ! Dimensions: 135 x 100 x 140 mm

In blue carrying case

Content consisting of 55 pieces SK 50 tool holders, some equipped with cutting tools such as internally cooled solid drills, cutter heads, indexable insert milling cutters and boring tool Reference: Seitz und Strenger - Lot 52 Weight: approx. 500kg

Consisting of: Table 1 x Vibratory metering, type VD4 1 x spiral conveyor type BF 40-L12

Control Panel, Control Panel, Operator Panel SIEMENS SIMATIC OP 7-DP ( SIMATIC OP7-DP ) 6AV3 607-1JC20-0AX1 ( 6AV3607-1JC20-0AX1 ) 24 V 0.2 A used, tested ! Dimensions: 180 x 145 x 45 mm

Contactor EAW ID 01 ( ID01 ) TGL 28973, TGL 20457 16.6 kW 660 V 25 A Us: 220 V AC used ! Dimensions: 85 x 70 x 110 mm

Working length 2000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 800 kg Height adjustment 650 - 950 mm Machine weight approx. 0.045 t Dimensions L x W x H 2.07 x 0.48 x 0.21 m Condition: never used / new (5)

3m roller conveyor with manual length stop. Working length 3000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 900 kg Height adjustment 650 - 1100 mm Machine weight approx. 0.050 t Dimensions L x W x H 3.1 x 0.45 x 0.6 m Condition: never used / new (5)

Electronic Module, Machine Control NUM S. A. Type 760 3x Input / Output Module 1x Memory Module 2x Control Module 1x Input Module 1x Processor Module 1x Power Supply 220 V AC 50 / 60 Hz Spare Part for Toyoda HES52 ! used, tested ! Dimensions: 485 x 260 x 300 mm

Control Cables, Robot Cables FANUC A660-8009-T851 Cable lengths: 4 x 3.1 m 2 x 1.5 m 1 x 0.9 m New ! Dimensions: 400 x 260 x 80 mm

Machine Control SATMATIC OP109 U61384-005 with control panel SIEMENS SIMATIC MULTI PANEL MP 277 6AV6 643-0DB01-1AX0 Control cabinet RITTAL AE1050 used, tested ! Dimensions: 510 x 400 x 1540 mm

Contactor ALBRIGHT SW200N-29 W44743 80019/10 250 A Control voltage: 24 V New ! Dimensions: 170 x 80 x 70 mm

Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height above bed: approx. 100 mm Travel X: approx. 100 mm, Z: approx. 200 mm The machine is equipped with a tailstock, a three-jaw chuck and a special tool turret including a mobile workbench and matching accessories Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos.

Electronic Module, Machine Control KOYO, AUTOMATION DIREKT Direct LOGIC 205 ( LOGIC205 ) Ethernetcotroler H2-EBC Digital Input Module D2-16ND3-2 Digital Output module D2-16TD2-2 Analog Input / Output Module F2-4AD2DA Base Module D2-04BDC1-1 12 - 24 V DC 25 W used, tested ! Dimensions: 205 x 90 x 100 mm

Capacity: 280 l Load capacity: 300 kg incl. device for forklift Reference: Seitz und Strenger - Lot 70 Weight: approx. 84kg

CNC lathe for metal part turning operations. Numerical control: Fanuc 18T Axes: 3-axis Turret: 12 fixed positions + 6 rotating positions Chuck: Ø 200 mm (possibility of mounting clamps in the spindle) Distance between tips: 350 mm Spindle speed: 4,000 rpm Spindle passage: 51 mm