con used for sale

approx. 50 pcs in stock Office container - aisle container 16 Fufl / 20 Fufl / 24 Fufl 4.88x2.45x2.6m 6x2.45x2.6m 7.33x2.45x2.6m incl. electricity and lighting For conversion, expansion and/or refurbishment more information: We can configure the containers according to your wishes and conversions! Delivery possible!

Mobile ring trough mixer with 2 exchangeable mixing blades and 1 exchangeable side scraper for mixing smaller quantities of concrete.

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

a top-class convectomat, hot air damper / convectomate/ combi damper / CombiMaster , gas-heated, 50-250C. External dimension: 1240x960x1400mm, internal dimension: 620x640x830mm with stikken trolley for 10xGN2/1. Electrically controlled, 400V, 0.3kW. Good condition.

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

Sanitary container, m/w, 10 feet (3m) We rent and sell storage containers, sea containers, construction containers, overseas containers, office container dupplants. Offer with transport possible-ask us. Sample pictures-viewing by appointment possible. Please also note our other offers.

Storage container "Moverbox," 5 feet (1.5m) We rent and sell storage containers, sea containers, construction containers, overseas containers, office container dupplants. Offer with transport possible-ask us. Sample pictures-viewing by appointment possible. Please also note our other offers.

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Contec Mini 15 - Concrete mixing plant Mixer M 500/300 liter Capacity 4 - 9 m3 Aggregate hoppers: 2 x 2.5 m3 on a stable metal frame Belts: 2 belts integrated and attached to the aggregate hoppers

60 x 300 cm without stand

Gebr. Convectionomat Convotherm OSP 10.10, checked and tested, for 10 sheets, approx. 20 kW, automatic cleaning

Condenser LUVE Contardo with two fans, approx. 50 KW

Condenser LUVE Contardo Type HCE 74, with three fans 630mm, approx. 80 KW

Module converter -Type: S 909 -Price: per piece -Number: 2x available -Weight: 6.3 kg

plug -Type: SACC-M12FR-5CON-PG9-M -Number: 65x available -Price: complete -Weight: 4.5 kg

Inclined conveyor belt on aluminium profile - MB Conveyors N-CPR (2 pcs.) Year of construction: 2011 Location: Lodz, Poland The inclined conveyor belt on aluminum profile, with regulation of height and angle of inclination Length of the inclined strap 200 cm, length of the horizontal strap 70 cm, width of the strap 44.5 cm Carriers with a height of 3.5 cm every 39 cm Height of the conveyor belt housing: 5 cm All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

90° curve conveyor, plastic belt, belt width: 260 mm, total dimensions: 3900 mm x 1300 mm x 950 mm.

90° curve conveyor with s/s mesh belt, belt width: 860 mm, total dimensions: 1330 mm x 1330 mm x 810 mm.

90° curve conveyor with s/s mesh belt, belt width: 860 mm, total dimensions: 1330 mm x 1330 mm x 1050 mm.

S/s mobile S-shaped conveyor, plastic mesh belt, belt width: 400 mm, total dimensions: 6200 mm x 1600 mm x 1100 mm.

Description Straight Ribbon Carpet type: Smooth with strips Belt Length: 2120 mm Useful Belt Width: 400 mm Minimum Belt Height: Loading: 170 mm - Unloading: 550 mm Maximum Belt Height: Loading 170 mm - Unloading: 650 mm Strip height: 20 mm Listel pitch: 400 mm Strip length: 395 mm

Description Straight tape Carpet type: Smooth Belt Length: 4930 mm Useful Belt Width: 695 mm Minimum Belt Height: 775 mm Maximum Belt Height: 1100 mm (NEW CARPET)

Dp. max 10 bar; 6 - 18 psi;

Quantity available : 5 units Volume: 200 L Material : Stainless steel Year : 1995 Reference : CC200l Total top opening Diaphragm valve: ? 20 cm Dimensions : 85 x 125 x 70

Quantity available: 5 Capacity : 35 L Weight : 27 Kg Material : stainless steel 316L Mobility : 3 wheels with locks. Operating pressure : atmospheric Closing lid Outlet valve : diameter 20 mm

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 380 V 100 Hz -Power: 18 KVA -Dimensions: 1160/480/H540 mm -Weight: 290 kg

-Parallepipedic stainless steel 1,544 liters Tare 255 kg / pressure test 0.65 bar Palletizable and stackable Top trapdoor diameter 450 mm hermetic Drain d.50 Approved for transport Dimensions: 1000 x 1200 x ht 1850 Weight: 2950 kg

Containers for powder and capsules. Total volume: 500 litres Useful volume: 300 litres according to manufacturers plate Quantity : 12 Polished stainless steel 316 Pyramidal bottom Total opening Lid Drainage trapdoor 150 x 150 Overall dimensions 750 x 750 x 1350

CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Converter, interface converter Interface Powered Converter unused original packaging -Type: ic485lp-1 RS232-RS422/485 -Dimensions cardboard: 180/115/H60 mm -Weight: 0.4 kg

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Phoenix Contact, interface converter ovp -Type: PSM-EG-RS232/TTY-P/2K Ord.-No. 27 61 253 -Price per piece -Number: 2x converter available -Dimensions cardboard: 120/90/H70 mm -Weight: 0.3 kg/pc.

Speed Control Unit, speed controller, controller, engine governor, motor controller, motor control controller -Manufacturer: Phoenix Contact, Motor control: Motor control controller -Type: ME2213 -Dimension: 130/45/H75 mm -Weight: 0.3 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, fiber optic cable with connector -Type: AT-VQHB2Y -Application area: outdoor use -Length: 166 m -Price: complete -Dimensions roll: Ø 500 x 335 mm -Weight: 21 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece -Dimensions: 100/20/H120 mm -Weight: 0.1 kg/piece

Interface converter, converter, module converter, FL Comserver -Manufacturer: Phoenix Contact, FL Comserver -Type: Basic 232/422/485 Ord.-No. 23 13 478 -Price: per piece -Number: 3x available -Dimension: 100/20/H110 mm -Weight: 0.1 kg

CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: PSI-MOS-DNET CAN/FO 850/BM -Price: per piece -Number: 59 pieces -Dimensions: 100/23/H110 mm -Weight: 0.2 kg/piece

Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 -Weight: 0.3 kg

Connector, plug, sensor module -4-pin -Screw locking: M12 x 1 -Nominal voltage: 250 VAC/DC -Cable entry: max. 6 mm -Connection: max.0.75 mm² -Number: 60x available -Price: per piece -Minimum order: 4 pieces -Weight: 20 g

Motor control, controller -Manufacturer: Phoenix Contact, Mosca Motor Control -Type: EG 45 ME2213 -Number: 12x available -Price per piece -Dimensions: 75/45/H130 mm -Weight: 0.3 kg/pc.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Wet cast concrete pipe production plant for sale • Fully automated factory designed and developed by Consmema/KTB • Fully complete set of machinery • In operation since 2016 in West Europe • Capacity up to 300 pipes per day in different sizes: 300- 1500mm • Very distinctive pipes: smoother, lighter and sawable • For sale because of strategical redirection of selling company Completely new way of manufacturing • Use of Self-Compacting Concrete (SCC) – wet cast • High degree of automation • Good and clean working conditions • Leading to high quality pipes and unique products • Easy to cut to suit with notches • Remaining part can be re-used, no waste material • No butt, spigot or socket pipes required • Inside pipe wall is smooth because of wet instead of dry concrete: better flow of (waste) water • More than 20% lighter and thinner th ...

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, converter, inverter -Manufacturer: Control Techniques, Commander SE frequency converter -Type: SE2D200150 SE 2.5M/TL -Power: 1,5 kW -Input: 200/240V - 50/60Hz -Output: 3 Ph 0-240V 0-1000Hz -Dimension: 145/130/H280 mm -Weight: 3.3 kg

Manufacturer: Containerbau Hameln / Weser-Container Dimensions: 5500 x 2300 x 750 mm Quantity available: 5 pcs. Year of manufacture: 3 x 2005; 1 x 2014; 1 x 2015 Load capacity: 15000 kg Weight: 2234-2240 kg Back: 5 mm steel Sides: 3 mm steel Hook mounting: according to DIN 30722 External rollers: with gunmetal bushing and shaft lubrication Tailgate: watertight with rubber seal Roof: hydraulic, with hand pump, tilting cylinder and stop on the driver's side Condition: good (the containers were rarely used) Location: Nienburg/Weser

Container from 2004, 20 fd standard storage or sea containers from 2004, complete (closed model), left door is welded, signs of wear. 1 available. 40 fd, 6,058 x 2,438 x 2,591 [m] Manufacturer:– Type: Standard container 20 fd Content [m3]: 33,1 Year of construction: 2004 Weight [kg]: 2.250 Dimensions LxWxH [cm]: 6,058 x 2,438 x 2,591

Digital DC Drive Mentor 2 M75 RGB 14 30 KW

Technical information Tray packing line (sorter + bagger) : - Vendee sorter concept Calibra T / Year 2017 - Ulma Florida flow-pack bagging machine / Year 2003 - Videojet marking system / Year 2016 - Automatic conveyor Vendée concept / Year 2018 The current format: Tray 500 gr (tray height 65mm width 110 and length 190) Second recorded format: Tray 250 gr (tray height 50mm, width 98 and length 140). Possible packaging 1 kg (tray height 108mm, width 125 and length 192). The automatic weighing unit can weigh products up to 3 kg. Changeover is done quickly by changing the computer parameters and changing 3 mechanical settings. Maximum capacity of the line is 65 units/minute with the use of the Vendée Concept weighing unit and 80 units/minute without the weighing unit. The flow pack packer in use alone can go up to 110 packed units/minute. Frabicant / bran ...