con used for sale

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

Control CC 100 for ENGEL injection moulding machines

Miwe Condo CO 4.0608 2D floor shop oven My. 2011 4 floors for 60x80 cm sheets each 2 double-chamber floors with one controller each each floor with stone baking plates Entrance floor height 13 cm digital control Miwe FP control mobile on steering wheels Fermentation cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Technical data: BJ: 2011 400/230 V / 50Hz / 19.1 kW Electric From this Miwe Condo oven we have many constantly available in our warehouse immediately. Built from 2009 to 2012.

Stainless steel silo container BSIF 550 Ltr. Content: 550 Ltr. Operating pressure: pressureless Year built: unknown Herst.: Shepherd Material: stainless steel 1.4301 container, frame iron painted Design: Rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, dome lid 400 mm, drain disc valve DN 150 in stainless steel, very well maintained condition, vent cap in the upper lid, stainless steel pipe DN 80 in funnel, funnel inclination 45° last use: granules Height: approx. 1,480 mm Width/depth: approx. 1,200 mm / approx. 800 mm

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

Gram Xtrem Condor S Platform Scale 3000 kg Robust industrial floor platform scale made of stainless steel. Suitable for the food and chemical industries as well as all other industries where scales come into contact with water, moisture or other corrosive substances. Maximum flexibility: Weighing pallets, drums, loaded transport or hand pallet trucks, carts or roll containers. Suitable for weighing standard-sized truck pallets (1200×1000 mm), large drums, trolleys or containers on wheels. Adjustable feet provide stability when weighing and optimal power transfer to the load sensors. Suitable for floor installation. Otional: ramps for loading and unloading weighing goods without special equipment Very low platform height (50 mm) for easy access to the load. Connection to Xtrem PC software for simultaneous recording of the weighing values of several scales. Minimizing technica ...

Edgethickness: 0,3 - 20 mm Edge height: 14 - 65 mm Edge length: minimum 160 mm Feedrate: 6 - 30 m/min Workpiece thickness: 8 - 60 mm Workpiece width: minimum 65 mm Workpiece length: minimum 150 mm

2x CHILLER with 660kW; each with 2x BITZER screw compressors; very few operating hours; in 2 containers with 2x recooler on the containers Technical data: Manufacturer: GWK Germany Type: SKW 2 -600 X 2x Bitzer Type: CSW 8593-125Y-40P Containers are heated Operating hours: approx. 5000h Year: 2010/2011, water tank approx. 8 m³ for cold water with 5 pumps 2 x GEA plate heat exchangers for freecooling 2 x 40ft Container High Cube B 3 m connected to each other 2 x GÜNTHNER Glycol Table Cooler W 2.4 m; 500 l capacity; on the container with 12 EC fans each (speed controlled) Refrigerant R134a; 34 kg per circle; Filled complete documentation very good condition more data: see pictures More pictures on request Price on request under infofrigocom.at

Fanuc console

SMC CEU2 I/O controller

REF-2368 HOBART CNA-L CONVEYOR RACK-TYPE DISHWASHER Conveyorized rack-type dishwasher. Manufacturer: HOBART. Model: CNA-L. Serial no.: 86463655. Year: 2007. 26.30 kW/50.30 A. 380-415 V/50 Hz/3-phase. Throughput: 180 racks/3,240 plates per hour (120 racks according to DIN 10510). Complete with HOBART heat pump. Pump model: CHP 18. Serial no.: 692. Year: 2007. Refrigerant type: R134a (capacity 3.2 kg). Maximum pressure: high side 28 bar; low side 8 bar. Compressor: maximum flow rate 17 m3/h; 2,900 rpm. Inside dimensions: width 510 mm, height 460 mm. Overall dimensions: length 3,200 mm, width 800 mm, height 2,150 mm. With large” high-performance pre-wash zone, as well as washing, rinsing and drying zones. Made of high-grade stainless steel. SMARTRONIC electronic control. Including 2 speeds, emergency stop and main switch. Efficient dual-rinse system. In-buil ...

Deck Oven Miwe Condo CO 5.0806-4E Year: 2017 Stone Slabs Oven Miwe Condo CO 5.1206-4E Electric - 5 shelves each 80x60cm - lower 4 floors have an entrance height of 13cm - top floor has an entrance height of 17cm - Each floor can be controlled separately - Top and bottom heat can be controlled separately - Each floor with separate steam function - with proofer - With steam condenser - With exhaust hood - Floor entrance height 13cm - Total connected load : 29,9kW - one double chamber 11kw each - Top floor 5.7 kw - Proofer: 2.2kW - Year of construction 2017 Dimensions: Width: 110cm Depth without hood: 115cm, with hood +40cm Height: 216cm

30T Heat Size EAF Meltshop with Billet Caster Year of Mfg. 2004-2014, installed but never been used. The Equipment was purchased over a 10-year period, starting in 2004. But recently management not get involved in steelmaking. The Buyer needs to invest in completing the Installation. A detailed plant assessment report (prepared by DANIELI) outlines the required works / investment to put it into operation. According to the report, the Steel Making Plant can reach more than 230.000 TPY billets production after adjustments to existing equipment and installation of a LF. The line consists of: • 30 Ton EAF (Electric Arc Furnace) 'CONCAST' Shell: Spout type; Diam. 4.0 M; Shell height 1.3 Int. Panels diam. 3.8 M; Hot heat 5 Ton; Bucket volume 23.0 M³; El. Pitch diam. 900 mm; Electrode diam. 16” 3x buckets charge; Tap-to Tap Time 90 min.; Power on 73 min. Transformer 17/20 M ...

CONICAL ROUNDER, Sind GT Dimensions: 950x950x1520mm Electrical power: 1.1kW

LVD 62910013 SSI XY-AXIS RF Converter

power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.

Name: CNC control unit / control unit Name: HURCO CNC Control Unit Manufacturer: HURCO Companies, Inc. (USA) Serial Number: U4M01003112D Type: Control Unit / Control Kit Dimensions (estimated): approx. 440 × 360 × 160 mm Weight: approx. 15 kg Country: USA Short Description: HURCO control unit with several plug-in cards, including RAM and interface boards as well as connections for COM, I/O and other interfaces. The device is designed for industrial use in CNC milling machines or machining centers. The rugged aluminum chassis features two active fans for internal cooling, as well as numerous I/O ports (Sub-D and Centronics). There are several signal connectors on the front and back, as well as internal expansion slots for additional modules.

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

TO WHOM IT MAY CONCERN ; WE VE USED 2 PCS WOODWARD 828 DIGITAL CONTROL MODULES AT OUR STOCK. WE DISMANTLED FROM RUNNING ENGINE SYSTEM . PLS FIND DETAILS OF 828 DIGITAL MODULES ON BELOW PART NO 9907 - 247 REV NEW SERIAL NO 12197885 PART NO 9907 - 247 REV G SERIAL NO 16033485 PLS REFER SOME PHOTOS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Gravimetry ConPro for Processing of up to 4 components Total capacity: approx. 300 kg/h GraviCon Type PP45-400/l – Basic Version Control terminal with 5'' colour screen (touch screen) Desk housing with stand Dimensions: H 430 mm x D 235 mm x W 245/340 mm 2 x hopper scale I-KTW F36 for components 1 + 2 Throughput: up to 250 kg/h (especially for fibrous materials and poorly free-flowing materials) Base frame Hopper without viewing window Load cell holder with platform load cell 2 x hopper scale I-KTW P3 for components 3 + 4 Throughput: up to 70 kg/h (for paint or aditive in powder form) Base frame Hopper without viewing window Load cell holder with platform load cell 2 x dosing unit type CP22 for components 3 + 4 with 1 set of screws and barrels each – version: 10/18 (min. 1 to max. 20 kg/h) incl. 2 x spec. Neckpiece incl. 2 x storage container type: VB1 ...

Dodmores Vibratory conveyor Serial: 30520 Stainless frame, 50Kg stainless hopper, overall length 2200mm, vibratory conveyor dimensions 2000mm x 600mm, mobile, 1Ph

Used blow moulding machine made by KRONES model Contiform S18. New 2004. It has 18 blow moulding stations. The maximum blow moulding speed is 24,000 bottles per hour for the 2.0 l format and 28,000 bottles per hour for the 1.5 l format. In February 2024, the machine was upgraded to support the PCO 2622 thread. The blow moulding machine has an integrated control system with visualisation in Polish, English and German. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic glycol cooler, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air transport conveyor.

Convotherm Combi oven Model: OES 6.10 Stainless oven, digital control system, internal dimensions 600mm x 450mm x 500mm, 3Ph

2.The main structure and performance of the machine tool: This machine tool is designed and manufactured using the latest technology, ensuring its strength, rigidity, and safety. Its simple and elegant appearance and exquisite workmanship demonstrate meticulous machining and component assembly. The machine utilizes a single, high-quality welded steel structure, resulting in a thick, rigid frame. The machine surface is sprayed with imported rust-resistant primer and topcoat, ensuring it remains as good as new for a long time. The frame and upper working slide are machined using imported large-scale CNC floor-type boring and milling machines, ensuring the required positioning accuracy of all mounting surfaces. This machine tool primarily consists of a frame, upper slide, backgauge system, slide, synchronous control device, mold, hydraulic system, and control system. 2.1 Frame: This pa ...

; Gross weight [kg]: 11000; Accessories: 40FT HC used Genset Container , ex FG Wilson P1650-E3, Inside dimensions: 8820x2200x2600 )LxWxH in mm)

; Gross weight [kg]: 6650; Accessories: 20FT Unused Genset Container

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Electrically heated conveyor furnace

Gas-heated conveyor belt furnace

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

Continental Contract AC 70 380/70 R 20 TL, on original Iseki rims. Tires almost 100%, condition as good as new, approx. 40 mm stud height. Outer diameter approx. 105 cm, year of production probably 2008 (128 A8), width approx. 37 cm, rims press-in depth inside approx. 125 mm, outside approx. 155 mm, hub approx. 160mm/hole circle approx. 6x205mm Further wheel sets of various sizes for municipal tractors and machines in stock, information and offers on request. No shipping of package deals or lists. Please name and tel. for questions. Please feel free to receive advice by phone in advance. For sightseeing appointment required!

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

Composed of: - Pin mill, manufacturer : Condux, type CST 150 / F, pin disc diameter : 165 mm; - Dosage - Filters - Container approach --> mill housing in stainless steel;

Key data: 4200 mm, 1090 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition

Capacity: 1016kWh, Nominal power kW: 800, Nominal power kVA: 1000, Nominal voltage (50Hz): 400 , Protection: IP54, Heating cooling system: HVAC , Max current (A): 1600, Nominal current discharge (A): 400, Discharge current (C): 1.5, Battery type: (NMC), On grid and off-grid applications: Yes; Gross weight [kg]: 16000; Accessories: Battery, Control Panel, Stahldach, 12touch screen, Fire extinguish system, AEG Bi-directional Storage Converter, 20ft Container

Control unit for W&P Rototherm Sty furnaces -manual control for WP Rototherm rack ovens

From stock of Marine Consilium Selesmar MM950/A Marine Radar Monitor for sale ! MM950/A 20C ARPA DISPLAY UNIT TYPE 10MC-003 MM950 KEYBOARD UNIT TYPE 10KB-001

NNP Vibratory conveyor Stainless frame and conveyor, conveyor dimensions 2500mm x 1150mm, height adjustable frame, 3Ph

SMA SMA Cluster controller CLCON-S-10

Shared oven Miwe Condo CO 4.0608 2D used shared oven Miwe Condo CO 4.0608 2D shared oven from 2004 is currently for sale and immediately Available in our warehouse in Bielefeld.Shared oven Miwe Condo CO 4.0608 2D Miwe Condo shared oven with 2 double chambers so 4 floors plus proofing cabinet plus steamer. The stove is with Miwe FP 12 control, each floor 60x80cm long. Immediately available 40 pieces of Miwe Condo in stock. 4 floors for each 60x80 cm sheets 2 double-chamber floors, each with one controller each floor with stone baking slabs Entrance floor height 13 cm digital control Miwe FP control can be driven on swivel castors Proofing cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Specifications: YEAR: 2004 400/230 V / 50Hz / 20.9 kW Electric

Offer MWM Card 1251 1717 DSP-AKR-P for sale.