con used for sale

connecting cable, connecting line -Manufacturer: Wago, connecting cable 2-pin with plug type 769 -Cable length: 1400 mm -Number: 19x cables available -Price: per piece, minimum order 2 pieces -Transport dimensions: Ø 240 x 20 mm -Weight: 0.1 kg/pc.

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFTSP -Speed: m/min -Conveyor belt length: 830 mm -Belt spacing: 3x 500 mm -Conveyor width: 1500 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1900/900/H2150 mm -Weight: 219 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 560 mm -Conveyor width: 1000 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1450/1350/H750 mm -Weight: 135 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg

2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.

Transnorm conveyor belt GF 6600-600-500 RA2137 Technical data: Conveyor length (NL): 6600 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4 Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentrala ...

conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: conveyor belt with underframe -Speed: 23 m/min -Belt width: 100 mm -Conveyor length: 1040 mm -Total dimensions: 1040/350/H670 mm -Weight: 26 kg

Recon Part number: 555 030 20 20/42 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 1x transport rollers available -Dimensions: Ø 90 x 780 mm -Weight: 8 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 3x transport rollers available -Price per piece -Dimensions: Ø 90 x 785 mm -Weight: 6.9 kg/pc.

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven, 2 pieces -Roll width: 240 mm -Rollers: Ø 50 mm -Roller spacing/axle distance: 150 mm -Total length: 2040 mm -Price/Delivery: complete -Transport dimensions: 2040/300/H140 mm -Weight: 25 kg

Recon Part number: 524 030 12 20 EX59403800070/42 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor rollers: Transport rollers diameter 98 mm -Transport width: 745 mm -Number: 4x transport rollers available -Price per piece -Dimensions: Ø 98 x 780 mm -Weight: 8.2 kg/piece

Control unit, control, for power generator, emergency power generator, generator, aggregate, power generator, emergency power generator, power generation aggregate -Manufacturer: Strüver, Control Unit Type Compact 166-S -Number: 2x controls available -Price per piece -Dimensions: 485/160/H115mm -Weight: 3 kg

Controller, programmer, program controller -Manufacturer: SBF, converter dimmer with button connection with base plate -Dimmer: Type PWM -Voltage: In: 24V DC 17-32V -Number: 9x controllers available -Price: per piece -Dimensions: 120/80/H40 mm -Weight: 0.1 kg/pc.

Recon Part Number: 1230 7743 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Gefran, power controller power regulator -Type: GTF-25-480 -Number: 5x power controllers available -Price: per piece -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/pc.

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Control panel, operating unit, control board, operating panel, operating unit, keyboard, CNC control -Manufacturer: Deckel, control unit from milling machine Deckel FP4L -Transport dimensions: 1200/800/H220 mm -Weight: 33 kg

Transnorm conveyor belt GF 1000-600-500 RA2125 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R17 DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...

Transnorm conveyor belt GF 14500-700-600 RA2147 Technical data: Conveyor length (NL): 14500 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 14500 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed  ...

Operator panel, machine control, operating unit, operating panel, handheld terminal, handheld control unit -Control unit: Hand terminal for press brakes or similar use -Connection cable: see photos -Transport dimensions: Ø 400 x 200 mm -Weight: 4.8 kg

Ref. -No.: 10374 Manufacturer: MONFORTS Year of construction: 2000 Type of control: Zyklen gesteuert Control: MONFORTS Control Storage location: Halberstadt Country of origin: Germany

Connectors, plugs, sensor modules -Connectors: 3-pin, 44 pieces Type: unfortunately without a designation -Price/Sale: complete -Dimensions: 41/39/H17 mm -Weight: 2.2 kg

Connectors, plugs, single-conductor spring strip -Connectors: 3-pin, 60 pieces -Type: unfortunately without a type designation -Price/Sale: complete -Dimensions: 35/25/H15 mm -Weight: 0.05 kg/pc.

Ref. -No.: 10369 Manufacturer: MONFORTS Year of construction: 2005 Type of control: CNC Control: MTCK/Euro Turn Storage location: Halberstadt X stroke: 450 mm Z - stroke: 3850 mm Centre Distance: 3970 mm Feed Capacity - Z: 20,7 kN Feed Capacity - X: 10,1 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Circumference diameter over slideway: 830 mm Circumferential diameter over radial slide: 540 mm spindle taper diameter: 140 (Metrisch) mm Quills Morse taper: MK6 Max swing diameter: 900 mm

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

Ref. -No.: 10366 Manufacturer: MONFORTS Year of construction: 2000 Type of control: CNC Control: EURO TURN Storage location: Halberstadt Country of origin: Deutschland Machine length: 5000 mm Machine width: 1970 mm Machine Height: 1800 mm X stroke: 370 mm Z - stroke: 2880 mm Chuck diameter: 200/250/315 mm Centre Distance: 3040 mm Spindle Head: DIN 55027 - 8x220 Feed Capacity - Z: 18,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 5 m / min Rapid Travel Speed Z-Axis: 10 m / min Circumferential diameter over radial slide: 350 mm Max swing diameter: 720/630 mm travel of the cross slide: 375 mm Spindle head max. passage for violent material: 68 mm Spindle head max. passage for bare material: 70 mm Tailstock outside diameter of the quill: 110 mm Tailstock maximum quill stroke: 210 mm Tailstock inner cone: MK6 Type Further information: Additional lubricating oil tank approx. 6l

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles -Manufacturer: GH, angle connector with web 29 pieces -Type: GH-WVB 105x105x90x2.0mm -Price/Delivery: complete -Weight: 0.3 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector with web 27 pieces -Type: GH-WVB 90/100S 100x100x90x3 mm -Price/Delivery: complete -Weight: 0.4 kg/piece

Ref. -No.: 10365 Manufacturer: MONFORTS Year of construction: 1997 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tai ...

Ref. -No.: 10319 Manufacturer: TAKANG Type of control: Digitalanzeige ACU-Rite Control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Weight Of The Machine Ca.: 1,3 t Swing diameter over bed: 430 mm Bed width: 300 mm Tip length: 1500 Centre Height: 215 mm Bed length: 1600 mm

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector 19 pieces -Type: GH-WVB 90/100S 100x100x90x2 mm -Price/Delivery: complete -Weight: 0.2 kg/piece

Inductive sensor, electronic sensor, sensor cable, connection cable, connecting cable -Connection cable: with plug and console -Type: 5-pin -Console: Designation A8.7465.7670.0 -Transport dimensions: 150/100/H15 mm -Weight: 0.1 kg

Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe

Ref. -No.: 10317 Manufacturer: NOSOTTI Type of control: Digitalanzeige - Mini wizard Control: Konventionell Storage location: Halberstadt Country of origin: Italy Tip length: 3000 Centre Height: 260 mm

Ref. -No.: 10313 Manufacturer: MONFORTS Year of construction: 2001 Type of control: CNC Control: EUROTURN Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 164 01 Machine length: 6200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 7,7 t X stroke: 450 mm Z - stroke: 3850 mm Chuck diameter: 315/400/500 mm Turning Diameter: 630 mm Turning Length: 3000 mm Centre Distance: 3985 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Space requirement: 7500 x 3500 mm Circumferential diameter over radial slide: 540 mm mm spindle taper diameter: 140 mm Jaw chuck diameter: 400 mm jaw continuity: 102 mm Quills Morse taper: 6 Max swing diameter: 830 mm travel of the cross slid ...

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg

Key data: 500 mm, 400 mm, 330 mm

achine details Stock-No. 1105-03933 Type of machine Machining Center - Vertical Make FANUC-STAMA Type Robodrill T14 ifb Year of manufacture 2010 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time by arrangement Freight basis EX WORK Technical details x-travel 500 mm y-travel 400 mm Z-Travel 330 mm table surface area 650 x400 mm turning speed range - milling 10000 rpm power capacity - milling spindle 7,5 kW tool taper BT 30 No. of tools in the magazine 14 pieces feed range 1-12000 mm/min rapid motion -longitudinal/cross/vertical 36 m/min total power requirement 10 kW Weight of the machine approx. 2200 kg dimensions of the machine approx. 2000x2400x2600 mm Additional information CNC FANUC 31 i MB 10000 rpm spindle

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven -Roll width: 480 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Dimensions: 1920/520/H150 mm -Weight: 50 kg

BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control Panel AC 230V/115V/0.4A/0.8A Item Condition: Used H2R3C11_2_RD

Plastic crates, reusable containers Transport box, storage container, picking box Color: Blue toothed with lid Dimensions: approx. L 600 x W 400 x H 353 mm approx. 1,000 pieces available

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive -Roll width: 1150 mm -Rollers: Ø 82 mm -Roller spacing: variably adjustable -Dimensions: 2300/1350/H200 mm -Weight: 231 kg

Telescopic belt conveyor Caljan Long John LJ3 Medi 600-5/6,5 RA2165 Base part with 2 electrically retractable and extendable telescopic elements. The telescope can be infinitely extended up to 11500 mm by pushing a button. Length base part: 5000 mm Width base part: 920/1000 mm Height base part: 770 mm, 1100 mm Transfer to conveyor technology Extension: 6500 mm Total length: up to 11500 mm Band width: 600 mm Condition: Overall condition good Load: up to 50 kg/m Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Fuse: 16 AMP optional: upgrade with start-up and clearing function Features: Construction year: 1998 condition: good (used) Conveying length in mm: 11500 ( 5000 + 6500 ) Nominal / outside width in mm: 1000 Belt width in mm: 600 Driven: YES KW: 1,75 Ampere: 16 Conveyor speed m / s: 0,5 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindun ...

Key data: 370 mm, 270 mm, 254 mm

Machine Details Stock-No. 1105-03942 Type of machine Wire Eroding Machine Make FANUC Type Robocut Alpha oid Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time to be agreed Freight basis ex site Price Technical details table length 700 mm table width 400 mm Control Fanuc 310 S WA X-Axis 520 mm y-axis 370 mm U-axis +/- 60 mm V-axis +/- 60 mm Conical angle (100mm) +/- 30° Z-Axis 410 mm max. workpiece sizes 600 x 420 mm max. workpiece height 400 mm max. workpiece weight 400 kg Rapid traverse 0.9 m/min interval size of the actuator 0,001 mm wire dia. 0.1 - 0.30 mm wire speed 0 - 15 m/min wire clamping 200 - 2.500 g total power requirement ~ 14 kVA weight of the machine approx. 2.5 t dimensions of the machine approx. 3.2 x 2.5 x 2.1 m Accessories Documents electr. Hand Wheel

Condenser Centauro Type: ACI/R 263/96.9Y Cooling capacity: 48,3 Kw Air flow: 11400 m3/h Number of fans: 2x630 mm RPM: 660/520 Dimensions: 2880x630x1230 mm Entry/exit diameter: 42/35 mm Quantity in stock:1 Stock number: SK104 Condition: Used

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: KJ, -Type: KA69 500B -Speed: 8.3 m/min -Belt width: 500 mm -Conveyor length: 11200 mm -Drive: Drum motor, see photo type plate -Transport dimensions: 11200/1170/H230 mm -Weight: kg

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control TSX Micro -Type: TSX3710001 -Dimensions: 170/135/H150 mm -Weight: 2.3 kg

container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 540 liters -Number: 12x containers available -Price: per piece -Dimensions: 1080/1000/H1110 mm -Weight: 105 kg/piece