con used for sale

Connectors, plugs, sensor modules -Manufacturer: Wago, Winsta ECBT2 connectors, 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6 boxes of 25 pieces each available -Price: per carton -Cardboard dimensions: 200/185/H55 mm -Weight: 0.6 kg/carton

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

Storage containers, transport storage containers -Storage container: made of stainless steel with 3 compartments, mobile -3 compartments: with container, see photos -Dimensions:1035/520/H640 mm -Weight: 48 kg

connecting cable, connecting line -Manufacturer: Wago, connecting cable 2-pin with plug type 769 -Cable length: 1400 mm -Number: 19x cables available -Price: per piece, minimum order 2 pieces -Transport dimensions: Ø 240 x 20 mm -Weight: 0.1 kg/pc.

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFTSP -Speed: m/min -Conveyor belt length: 830 mm -Belt spacing: 3x 500 mm -Conveyor width: 1500 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1900/900/H2150 mm -Weight: 219 kg

length: 4.000 mm width: 160 mm height over floor: ca. 850 mm total power requirement: ca. 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

800 x 600 470 mm 137 Piece(s)

800 x 600 445 mm 159 Piece(s)

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 560 mm -Conveyor width: 1000 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1450/1350/H750 mm -Weight: 135 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: conveyor belt with underframe -Speed: 23 m/min -Belt width: 100 mm -Conveyor length: 1040 mm -Total dimensions: 1040/350/H670 mm -Weight: 26 kg

Recon Part Number: 0208 8696 - with old acceptance (Part number without acceptance : 0407 9093) Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 1x transport rollers available -Dimensions: Ø 90 x 780 mm -Weight: 8 kg

MTF Technik type GL-HM 010 mobile conveyor, conveyor length approx. 4600 mm, conveyor width approx. 175 mm, working height adjustable from approx. 750 up to 1050 mm conveyor speed adjustable from approx. 9 up to 25 m/min., electrics 230V/50Hz.

Key data: 750 mm, 500 mm, 600 mm

Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis

Condenser Guntner Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057,2 / 920.7 kW Air flow: 279 000/229 000 m3/h Number of fans: 10 x 900 mm Dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Volume: 323.8 L Quantity in stock: 2 Stock number: SK 108 Condition: Used

TFT Screen + Keyboard

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 750 mm -Number: 3x transport rollers available -Price per piece -Dimensions: Ø 90 x 785 mm -Weight: 6.9 kg/pc.

Recon Part Number: 1216 3130 Gas & Diesel Connecting rod bushing new Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven, 2 pieces -Roll width: 240 mm -Rollers: Ø 50 mm -Roller spacing/axle distance: 150 mm -Total length: 2040 mm -Price/Delivery: complete -Transport dimensions: 2040/300/H140 mm -Weight: 25 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor rollers: Transport rollers diameter 98 mm -Transport width: 745 mm -Number: 4x transport rollers available -Price per piece -Dimensions: Ø 98 x 780 mm -Weight: 8.2 kg/piece

Control unit, control, for power generator, emergency power generator, generator, aggregate, power generator, emergency power generator, power generation aggregate -Manufacturer: Strüver, Control Unit Type Compact 166-S -Number: 2x controls available -Price per piece -Dimensions: 485/160/H115mm -Weight: 3 kg

Controller, programmer, program controller -Manufacturer: SBF, converter dimmer with button connection with base plate -Dimmer: Type PWM -Voltage: In: 24V DC 17-32V -Number: 9x controllers available -Price: per piece -Dimensions: 120/80/H40 mm -Weight: 0.1 kg/pc.

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Gefran, power controller power regulator -Type: GTF-25-480 -Number: 5x power controllers available -Price: per piece -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/pc.

Specifications: SEW Movigear Drive Motors/ Motor Quantity: 11 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/

x-travel: 2000 mm y-travel: 600 mm z-travel: 500 mm table surface area: 2500 x 650 mm spindle taper: SK 40 control: HEIDENHAIN, TNC 426 ATC: 36 Pos total power requirement: 60 kW weight of the machine ca.: 7,5 t - with coolant through spindle - Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant - new spindle on X-axis in 2020 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used connecting rods available for immediate delivery.

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Operator panel, machine control, operating unit, operating panel, handheld terminal, handheld control unit -Control unit: Hand terminal for press brakes or similar use -Connection cable: see photos -Transport dimensions: Ø 400 x 200 mm -Weight: 4.8 kg

Connectors, plugs, sensor modules -Connectors: 3-pin, 44 pieces Type: unfortunately without a designation -Price/Sale: complete -Dimensions: 41/39/H17 mm -Weight: 2.2 kg

Connectors, plugs, single-conductor spring strip -Connectors: 3-pin, 60 pieces -Type: unfortunately without a type designation -Price/Sale: complete -Dimensions: 35/25/H15 mm -Weight: 0.05 kg/pc.

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles -Manufacturer: GH, angle connector with web 29 pieces -Type: GH-WVB 105x105x90x2.0mm -Price/Delivery: complete -Weight: 0.3 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector with web 27 pieces -Type: GH-WVB 90/100S 100x100x90x3 mm -Price/Delivery: complete -Weight: 0.4 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector 19 pieces -Type: GH-WVB 90/100S 100x100x90x2 mm -Price/Delivery: complete -Weight: 0.2 kg/piece

Inductive sensor, electronic sensor, sensor cable, connection cable, connecting cable -Connection cable: with plug and console -Type: 5-pin -Console: Designation A8.7465.7670.0 -Transport dimensions: 150/100/H15 mm -Weight: 0.1 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven -Roll width: 480 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Dimensions: 1920/520/H150 mm -Weight: 50 kg

Table size 900x400 mm X Travel 750 mm Y, Travel 450 mm Z Travel 450 mm Spindle speed 12.000 rpm Controller Siemens 840D Sl Spindle taper SK40 Number of tools in magazine 24 Can be tested under power

Transnorm conveyor belt GF 4700-600-500 RA2120 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive -Roll width: 1150 mm -Rollers: Ø 82 mm -Roller spacing: variably adjustable -Dimensions: 2300/1350/H200 mm -Weight: 231 kg

SSI Schaefer Three-Piece Ascendant Conveyor Belt Manufacturer: SSI Schaefer Total length 6540 mm 1 x segment: 3960 x 470 mm 1 x segment: 1140 x 470 mm 1 x segment: 540 x 470 mm Belt width: 370 mm Left & right side guide Height: 700 - 1600 mm Gradient: approx. 8° 14% Geared motor: Manufacturer: SEW-Eurodrive Type: WA20DT71D4 Operating voltage at 50 Hz: 220 ... 240 V / 380 ... 415 Y Current consumption at 50 Hz: 2.15 / 1.24 A Speed at 50 Hz: 1,380 / 135 rpm Power: 0.37 kW Degree of protection: IP 54 More items new and used - can be found in our shop! International shipping costs on request!

SSI Schaefer Two-Piece Ascending Conveyor Belt Manufacturer: SSI Schaefer Total length 5900 x 600 mm 1 x segment: 4700 x 600 mm 1 x segment: 1200 x 600 mm Belt width: 600 mm Total width: 690 mm Left & right side guide Height: 800 - 1600 mm Gradient: approx. 8° 14% Geared motor: Manufacturer: SEW-Eurodrive Type: WA20DT71D4 Operating voltage at 50 Hz: 220 ... 240 V / 380 ... 415 Y Current consumption at 50 Hz: 2.15 / 1.24 A Speed at 50 Hz: 1,380 / 135 rpm Power: 0.37 kW Degree of protection: IP 54 More items new and used - can be found in our shop! International shipping costs on request!

EPS contour cutting line for the production of sloping roof, fillet and ridge panels, as well as freely programmable "contours". suitable for net block dimensions: 5300 x 1300 x 1300 mm. Version with oscillating panel cutting frame for the production of EPS sheets and special cuts. incl. block turner incl. automatic wire adjustment incl. trimming frame incl. plate chain conveyor incl. waste disposal incl. wire break detection (electronically controlled) incl. extensive documentation Visits are possible at any time by arrangement.

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: KJ, -Type: KA69 500B -Speed: 8.3 m/min -Belt width: 500 mm -Conveyor length: 11200 mm -Drive: Drum motor, see photo type plate -Transport dimensions: 11200/1170/H230 mm -Weight: kg

Transnorm conveyor belt GF 2250-600-500 RA2056 Technical data: Conveyor length (NL): 2250 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of d ...

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control TSX Micro -Type: TSX3710001 -Dimensions: 170/135/H150 mm -Weight: 2.3 kg

container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 540 liters -Number: 12x containers available -Price: per piece -Dimensions: 1080/1000/H1110 mm -Weight: 105 kg/piece

container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 230 liters -Number: 2x containers available -Price: per piece -Dimensions: 750/700/H890 mm -Weight: 62 kg/piece

Lippert conveyor roller curve 90° 980-900 IR900 RA2114 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 900 mm Nominal/outer width (NB): 980 mm roller width (NUB): 900 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor, R40DT71D4BM Engine power: kW 0.37 S1 Hz 50 Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 980 Roll width in mm: 900 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfac ...