con used for sale

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz

Used ConceptLaser Mlab Cusing R for sale. All firmware and software updates are updated by GE technicians. Annual maintenance and service by GE. Titanium was used almost exclusively on the machine. - The machine comes with onboard parameters for the following materials: SS 316L, 17-4, Aluminum AlSi10Mg, Titanium CPTi Grade 2, Titanium Ti6Al4V ELI Grade 23, remanium star® CL (CoCrW), rematitan® CL (Ti6Al4V ELI). Cobalt Chrome, Bronze CuSn - Software CL WRX Control 2.0 (current status) is available on the machine and electronically - Original documentation is included, Layer thickness: 15 - 30 my, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 705x1848x1220, Weight in kg: about 600

Hammer mill Manafacture: Condux made of stainless steel

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -double shaft output -Construction: B3 -Protection class: IP33 -Dimensions: 370/250/H190 mm -Weight: 16 kg

Year of construction 1989, front payload 4520 kg, rear payload 14960 kg, total weight 19480 kg, permissible up to 30 km/h, see appendix for data

Air bellows, roller bellows, air cushions -Number: 2 pieces -Manufacturer: Contitech -Type: 644 N -Package price -Weight: 2 kg

Pneumatic pressure switch -Type: MDR2/11 -Price: per piece -Number: 10x available -Weight: 0.3 kg

plug -Type: SACC-M12MS-5SC M -Number: 20x available -Price: complete -Weight: 0.5 kg

InterBus-S, bus coupler, Interbus -32 Digital Output 24 VDC -Phoenix Contact -InterBus-S -Type: IB STME 24 DO 32/2 -Digital Output -24 VDC 0,5A -Modul-Identnumber.: 189

Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg

InterBus-S, bus coupler, Interbus -Manufacturer: Phoenix Contact -Type: IB STME 24 BDI 16/4 -Number: 75x available -Price per piece -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.

InterBus-S, bus coupler, Interbus -Manufacturer: Phoenix Contact, Interbus -Type: IB STME 24 BDO 16/3 Ord.No. 2751700 -Price per piece -Number: 16x available -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.

Convotherm OES 10.10 combi steamer electric - with base - Disappearing door - door disappears to the side of the damper when opened 10 bays GN 1/1 Functions: Steam, Combi Steam, Hot Air Crisp&Tasty USB interface integrated in the control panel Standard equipment Steam (30-130°C) with guaranteed steam saturation Combined steam (30-250°C) with automatic Humidity adaptation Hot air (30-250°C) with optimized Heat transfer easyDial control panel Digital Display Regeneration Function ProductsRegenerate 99 cooking profiles, each with up to 9 steps Multi-point core temperature sensor Door handle with safety lock, preheating and cool-down function Metrics: Height with base: 182cm x Width:94cm Door pushed to the side: 103cm x Depth:82cm + 8cm handle Device is fully functional Contacts for personal arrangements: Mr. Avanesyan +49 176 56358605, Mr. Oswald +49 176  ...

Convotherm OGS 10.10 Combi Steamer Natural gas Disappearing door – door disappears to the side of the damper when opened Steam from 30 – 120°C Combined steam from 30 – 250°C Hot air from 30 – 250°C with optimized heat transfer Door handle and roll-up hand shower Fully automatic cleaning system ConvoClean Dimensions: Height:110cm x Width:94cm Door pushed into the side:103cm x Depth:80cm + 8cm handle Device is fully functional With instruction manual Original, DEU Condition: see original pictures Decorative items are not included in the scope of services. The device is fully functional. Viewing and test run is possible at any time in Gochsheim. Dispatch: Within Germany 2-4 working days Within the EU(European Union) 2-8 business days Pick-up: Gochsheim warehouse. Opening hours: Monday to Saturday from 8am to 6pm Contacts ...

Condizionamento chiller KEE 601 E 39 kW We offer chiller ⭐︎ The chiller that we dismantled a short time ago, is used but ready for use and in good condition. It ran flawlessly until expansion. ⭐︎ Scope of delivery as shown. Specifications: Chiller Type Number: KEE 601 E Power : 39 kW Voltage: 380 V Built in 1991 Hours: 24886 Compressor Manufacturer: Bitzer Type Number : 6E-60.2 Voltage: 380 V Power : 66-60 kW Condition: good / used All article relevant data / information can be found in the description as well as the pictures. All information is provided to the best of our knowledge and belief, the offered goods are sold as described and viewed. Shipping via a forwarding agent is of course possible for an extra charge. International Buyers Welcome please ask for shipping costs to europe and overseas

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

Dry agent mill Manafacturer: Condux Item no.: 5988 Type: CUM 100 Year of construction: 1992 Power: 1.1 kW with hopper(diameter 330 mm, height: 400 mm) with control cabinet, cable & plug on mobile frame (castors attached) LWH: 850 x 550 x 1550 mm

Thermoformer / heat sealer for product packaging in trays For flexible plastic trays, flexible plastic closure Rebuilt in 2015 With mold for 180 x 125mm trays Includes vacuum pump, and refrigerator DOCUMENTATION AVAILABLE

Bandwidth 75mm good condition inspection possible video available

Contimeta SIAT SM116 - K11/70 Automatic carton sealer with automatic folding system and manual format adjustment Automatic machine for standard closing The carton sealer automatically folds the upper lid flaps by means of guide rails and a closing arm 2 motorized lateral conveyors with a width of 50 mm Transport speed 20 meters per minute Voltage 400V signal system for tape end or breakage special painting: frame color RAL 5003, covering safety cage RAL2001 Energy saving system Special design: 3 colored indicator lamp: green/orange/red for machine condition ok / tape almost empty / tape broken. Including potential free relay contacts for these signals Carton is only glued on top, not on bottom Carton dimensions L x W x H (mm): Min. 300 x 150 x 180, Max. 900 x 650 x 700 The SM11-6 processes between 600 and 1000 cartons per hour The guide rails are manually adjustable The height of the sea ...

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.

SE-120 SIMPLEX extruders Capacity: up to 100 Kg/h Made of stainless steel Screw diameter = 120mm. Installed motor power: 2.2 kW. Heated extrusion cone Cooling circuit for auger, Electrical cabinet with buttons and speed variator Safety grid Maximum output diameter: Ø 75 mm Electricity: 400V, 50 Hertz, three phases Weight: 320kgs. Dimensions: 1500 x 600 x 800mm (h). Year 2019

C-track conveyors mobile elevating belt, serial number: 11839, year of construction: 03/2023, plastic belt with dividers, belt width: 600 mm, distance between dividers: 400 mm, divider height: 40 mm, elevating height: 2350 mm, total dimensions: 2400 mm x 1225 mm x 2430 mm.

welding electrodes; approx. 80 packs

Mounted on wooden workbench

Welding helmet included;

Chuck diameter: 120mm

Equipped with machine clamp

Height adjustable

X-travel: 3700mm, y-travel: 2200mm, z-travel: 200mm, table dimensions: 4000x2300mm, connected load: 23kW, length: 5000mm, width: 3300mm, height: 2350mm, weight: 1,2t.

Including blades, without documentation.

Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used.

Max. saw blade diameter: 425 mm Infinitely adjustable saw blade feed 2 motor speeds Hydraulic material clamps horizontal and vertical with clamping pressure reduction Optional minimum quantity spraying or coolant pump

Ideal for industrial use, designed for oxidation processes (AOP), UV disinfection and photochemical applications. Suitable for waste water treatment, recovery of valuable metals, electrolyte recycling and air sterilization by UV oxidation. Motor: AC motors type FBSP 80A-2/HT. Operating hours: 1186h.

Shielding box for electromagnetic compatibility, length: 728mm, width: 520mm, height: 520mm, with full absorber lining (ferrite absorber), 10x feed-through filters (banana sockets), BNC feed-through, cold device feed-through (filtered), Sub-D feed-through (filtered), waveguide feed-through for optical cables, double EMC seal, antenna feed-through (conduit feed-through), shielding attenuation and two gas pressure springs.

There are 6 baskets full of servomotors available. More detailed list available in the pictures. All servomotors work perfectly. Documentation available. On-site inspection is possible.

Description Industrial fume extractor composed of: - Ferrari Ventilatori Industriali brand centrifugal fan - engine: 22 kW - rpm: 1470 (automatic rpm adjustment based on depression - controlled by Toshiba inverter) - air flow: 48.440 m3/h - soundproof cabin - control panel - no pipes or filters

Description Power: 230v diam.scarico: 100 mm height: 630 mm Table size: 400 x 600 mm. AVAILABLE N° 5

Description Mold Control Unit: 1 zone microcontroller: RTC - 550 output voltage: 230 V temperature range: 0-400 ° C

Description Flexo printing machine from reel to reel 6 printing colors printing width 1300mm printing length 300 - 800mm printing speed 200 m/min installed power 80 kVA

2x Transformator 1250 kva 21.000v / 400v 50 hz Weight 2860 kg

Manufacturer: Ernens Materials: Stainless steel. Nature of the cleaning fluid: liquid / water - Capacity: example with sultanas 600 to 800 kg/h - Feeding belt: 350 cm x 1500 mm - 2 compartment bowl 600 x 900 x 600 mm including : 1 inclined screw for product recovery d.150 mm 1 screw + horizontal draining drum d.300 mm - Heating by external recycling of the fluid