127,288 used machines on RESALE, but how to find them? Machine Search
Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Belt Conveyor/Webbing/Conveyor Belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model No.: SFT/P50 Total length: approx. 5050 mm Total width incl. motor: approx. 450 mm Total width without motor: approx. 330 mm Conveyor width: approx. 300 mm Strap Type: Fabric Tape Material: Steel/Aluminum Frame height: approx. 50 mm Incl. SEW motor 0.25 kW/r/min. 2660/82.0/3260/100.0 Includes 4 feet, height adjustable Including side guide Stock: 5 pieces Price per piece Internal Article Number: 2026031803 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high ...
An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Machine Details Warehouse number 1105-03571 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1020 Year of construction 1999 Control type CNC Control FANUC OMD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1020 mm y-travel 510 mm z-travel 510 mm Table clamping surface 1200 x 600 mm Speed range - milling 8000 rpm Control FANUC OMD Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 24 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 5500 kg Space requirement approx. 2300x2200x2600 mm Accessories Full protection - fairing Complete machine documentation Information very nice MACHINE CONTROL FANUC O MD SPINDLE BT 40 8000 RPM
Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996
Belt Conveyor/Conveyor Belt/Webbing Manufacturer: Schunk Fördertechnik GmbH Condition: used Model/Type: Strap Total length: approx. 5110 mm Total width including motor: approx. 600 mm Total width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Belt Type: Fabric Tape Material: Steel/Aluminum Frame height: 100 mm Engine included: 0.25 KW Including 3 feet height adjustable Internal Article Number: 2026032303 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent ...
- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.
Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück
Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm
Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Two-hand control panel: from a press brake Atlantic HPT 13536 -Foot switch: Bernstein Classic -Dimensions: 920/1010/H1100 mm -Weight: 25 kg
Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators
Machine Details Stock-No. 1105-03574 Type of machine Machining Center - Vertical Make CHIRON Type FZ12 WM Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EXW -free on truck Technical details x-travel 550 mm y-travel 300 mm z-travel 425 mm tool taper SK 40 control Siemens 810 total power requirement 12 KVA weight of the machine approx. 4.0 t transport dimensions LxWxH 2,05x3,05x3,0 m Additional information chiron fz 12 wm with changeable plate with 2 x 4. axis PEISELER WIth CONTROL SIEMENS 810 TOOLS SK 40
Machine Details Warehouse number 1105-03578 Machine Type Machining Center - Vertical StAMA ROBODRILL brand Type MC 010 Year of construction 1990 Control type CNC Storage location HAGUENAU Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock Technical details x-travel 500 mm y-travel 380 mm z-travel 300 mm Spindle holder ISO 30 sk sa Clamping surface 650 x 380 mm Tool magazine with 10 seats Tool change time 5 sec workpiece weight 200 kg Speeds - autom. switchable 60 - 8000 rpm Feed speed 1 - 4095 mm/min Feed force 400 kp (X, Y) Feed force 1000 kp (Z) Rapid traverse speed 36 m/min (X, Y) Rapid traverse speed 30 m/min (Z) Information Equipped with/ Equipped with: - FANUC 0 M Control - 10-fold tool changer SK 30 - Coolant system / cooling attachment - 4 T-slots / 4 T-slots TOOLS SK 30
I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.
Type 012 F86 completely stainless steel 5.6 kW 30 L. funnels Capacity: 800 kg/h Dimensions (L x W x H) : ± 970 x 430 x 1,520 mm
Frequency controlled pump, TPE2 80-180 N-A-F-A-BQQE, Grundfos, new -30% - Single-stage inline pump (glanded pump) with speed-controlled, fan-cooled permanent magnet synchronous motor, - 50.5 m³/h, 360 - 4000 rpm, 2.2 KW, 12.8/18m, DN80, 10bar, 3x380-500V, - Grundfos 98437605, control panel HMI 200 standard, function module FM 300 - Frequency converter MGE90LD 2-56C-IA For air conditioning of commercial buildings, heating for commercial buildings Hot water circulation in commercial properties and much more. Special price ! The current new price of a similar product is € 4.800 excl. VAT. We still have several identical pumps, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a co ...
Machine Details Warehouse number 1105-03598 Machine Type Machining Center - Vertical Brand VERNIER GSP TRENS Type CV 800 Year of construction 1995 Control type CNC Control NUM 1060 Storage location HAGUENAU Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 800 mm y-travel 610 mm z-travel 508 mm Table size 1050 X 420 mm Spindle holder ISO 40 Drilling capacity in St 60 - Full drilling 45 mm Thread cutting up to M 24 Speed range - infinitely variable 6000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Distance spindle/table 100 - 608 mm Number of tool magazine slots 30 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 125 mm Tool length max. 380 mm Tool weight max. 7 kg Tool change time 7 sec Spindle 11 kW Control NUM ...
JenActUV UV Torpedo conveyor Model: UVTCONV500 Serial: 26557-PO1 Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph
Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Mitsubishi, frequency converter FR-A044-2.2K-ER -Power: 2.2 kW -Input: 380-460 V 50/60 Hz -Output: 6.0 A -Dimensions: 215/200/H185 mm -Weight: 4.8 kg
Power supply, power converter, power supply unit, switched-mode power supply, fire protection control unit -Manufacturer: Ströbich, protronic -Product: Control panel for power supply fire protection control RZ7 NT24-BMZ2 -Dimensions: 180/130/H2 mm -Weight: 0.1 kg
SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, transmitter -Manufacturer: PMA, temperature control -Type: CI 45 -Output: 500 VA, 250 VAC, 2A -Dimensions: 125/22/H110 mm -Weight: 0.2 kg
Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Design: stable -without: roller conveyor drive motor -Roll width: 557 mm -Conveying length: 680 mm -Diameter roll: 70 mm -Dimensions: 875/700/H125 mm -Weight: 44kg
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter -Manufacturer: Landis & Staefa -Type: RAM142.0/1982 -Dimensions: 185/95/H80 mm -Weight: 0.3 kg
0: 10000 kg height of stroke: 130 mm Total height: 290 mm weight: 21 kg dimensions: 190 x 260 x 290 mm Hydraulic machine jack Foot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 5000 kg height of stroke: 120 mm Total height: 243 mm weight: 15 kg dimensions: 170 x 230 x 250 m Hydraulic machine jack Foot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plug, connector, cable socket -Manufacturer: Siemens, connector 11 pieces -Type: AGA67/GDML 2016 GB 1 -Price: complete -Dimensions: 50/30/35 mm -Weight: 0.1 kg/piece
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 07.FO.R01-1228 -Input: 200 ... 240 V 50/60 Hz -Price: per piece -Number: 4 piece -Dimensions: 340/190/H85 mm -Weight: 3.3 kg
Our company offers the SUMAB E-12, which is a movable concrete block machine. The E-12 is a block machine that uses a technique known as egg laying,” where the block machine moves and produces concrete block products on the ground to dry – We offer the machine in fully/semi-automatic modes. With the SUMAB E-12, the following concrete products can be produced in an efficient way: • Hollow block stones • Solid block stones • Chimneys • Light weight blocks • Paving stones [with vibration table option] additional option Production capacity: For hollow blocks 400 x 200 x 200 mm ………. 1.200 blocks/h. For hollow blocks 400 x 200 x 120 mm ………. 2.000 blocks/h.
Mobile concrete batching plant, SUMAB K-60 Technical details: • 4 total storage tanks with 3.8 м3 each, with the possibility of increasing storages to 5 m3 • Pan mixer 1800/1200 litres, coated with 12 mm layer of special steel. • Automatic control for opening the damper supply for precast concrete. • 5 mixing arms. The special arrangement of the arms in the pan mixer allows all the parts of the mixer to be covered during the batch, which means that a high-quality concrete product is achieved. The K-60 Mobile concrete plant features a comfortable control cabin that allows for the automatic control of the system. The modern Siemens computer system enables you to produce over 100 recipes and types of concrete. You can print the specifications of any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Adva ...
High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece
All types of conveyors according to the buyers specifications
- Stainless steel structure - Belt length: 4000 mm - Belt width: 300 mm - With 4 feet - Without electrical control box
Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1
Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Controller MOD13/1X0021-008 -Contr: TD M3 ..- 020-300-WO -Component: from a DMT CD 480 lathe -Dimensions: 320/70/H390 mm -Weight: 6.5 kg
PLC control, Electronic control board -Manufacturer: Weiss -Type: 6FX1115-0AA02 -Dimensions: 200/140/H40 mm -Weight: 0.2 kg
Conveyor belt rollers, transport rollers, spare rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 40 mm -Admission: M10 -Price: per piece -Number: 2 pieces -Minimum purchase: complete -Dimension: Ø 40 x 700 mm -Weight: 1.3 kg/piece
Reducer Concentric AGRU/TRACEABILITY 90/75 SDR17
For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled
Machine Details Warehouse number 1105-03636 Machine Type Machining Center - Vertical Make DECKEL MAHO Type DMC 63 V Year of construction 2000 Control type CNC Control heidenhain tnc 426 Storage location FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight base EX WORK Technical details x-travel 630 mm y-travel 500 mm z-travel 500 mm Table size 800 x 500 mm Spindle holder ISO SK 40 Speed range 0 - 8,000 1/min Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 11 kW Control heidenhain tnc 426 Total power requirement 30 kVA Machine weight approx. 4.5 t Information heidenhain tnc 426 El. ...
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Hydraulic control block: control unit control valve for forklifts -Main block: type P9509818 -Valves: see photos -Dimensions: 280/110/H350 mm -Weight: 17 kg
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter -Manufacturer: TAE, converter -Type: TA-6 -Mains: 220 V power: 4 kW -Anchor: 170 V field 200 V -Dimensions: 260/145/H95 mm -Weight: 2.7 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter -Manufacturer: TAE, converter -Type: TA-1 -Mains: 220 V power: 1 kW -Anchor: 170 V field 200 V -Dimensions: 230/140/H95 mm -Weight: 2.0 kg
Eirich mixer 1 x double room 22- 1500 liters, year of construction 1967, 1 x DEV 22 - 2500 liters, year of construction 1973, incl. 2 elevator tracks and various belts, SPS BIKOTRONIC, from location, immediately available
Machine Details Warehouse number 1105-03650 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 E Year of construction 2001 Control type CNC Control msc 500 (FANUC 16M) Storage location FRANCE Country of origin Japan Delivery time immediately Freight base EX WORK Technical details x-travel 560 mm y-travel 410 mm z-travel 460 mm Control msc 500 (FANUC 16M) Rapid traverses x/y/z 20/20/15 m/min Table area 900 x 450 mm Tool magazine: 30 BT 40 tool diameter 80 mm tool length 250 mm tool weight 8 kg Spindle speed 8000 1/min Spindle motor 7.5 kW Total power requirement 30 kW Machine weight approx. 5 t Space requirement approx. 2.48 x 2.25 x 2.8 m Information FANUC 16 M 2 SPAENEFOERDERER
Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter -Manufacturer: TAE, converter -Type: TA-4 -Mains: 380 V power: 4 kW -Anchor: 270 V field 340 V -Dimensions: 230/140/H95 mm -Weight: 2.0 kg
Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM
maximum number of results exceeded
please refine your search
