127,269 used machines on RESALE, but how to find them? Machine Search
Electric motor AEG IP 54 Year of construction 1991 Type AM180LC 22kW Price 250,00€ net
Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...
Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net
Conical rounder Benier Bakery Teflon -Cone round knitter with Teflon cone and warp knitting rings
Frequency converter Combivert F5, 7,5KW, 14F5C1D-380A, KEB, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The device has been tested and shows no faults. - The operating hours display was locked and could not be read. Technical data: - Combivert F5 frequency converter, 7.5 kW, 14F5C1D-380A, KEB, used - 7.5 kW, 400 V - Without control unit - Contrary to the photo, without cover - incl. power filter Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the bu ...
Frequency converter F4, 45KW, 21.F4.COR-3420/2 2, KEB, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The device has been tested and shows no faults. Technical data: - Frequency converter F4, 45KW, 21.F4.COR-3420/2 2, KEB, used - Input: 3x 305-400V 100A, 460-500V 85A, - Output: 0 - 1600Hz, 0-440V/90A, 480V77A, - Power 62KVA, 45 KW - incl. control unit Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. ...
used press container Manufacturer: AVERMANN Type: MPC 10 Year of construction:? specifications: Pressing force: 38 t Drive power: 5.5 kW ? Capacity: 10 m³ Machine weight: 3,000 kg
I sell a double-sided CNC machining center Biesse Skipper 100 Year of construction 2006. Very productive and fast. Automatic entry table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per page: Milling head 3.5 kW, 7000-18000 rpm 29+8+2 drill heads 1 groove saw D.150mm direction X Software BiesseWorks. CD included. Condition very good ! Fully functional. Automatic system of central lukrikazion and extraction hoods. Complete with safety barriers, transport elements and CE points. CE certificate and full documentation included Need for repair: 1 pcs. safety carpet
used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE
Frequency converter Combivert F5, 5,5KW, 13F5K1D-390A, KEB, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - It may be that the device has been setted as a spare part for its use. - The device has been tested and shows no faults. Technical data: - Frequenzumformer Combivert F5, 5,5 KW, 13F5K1D-390A, KEB, neuwertig - 5,5 KW, 400V, 0-599Hz, - without control unit - with cover - with manual 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the pr ...
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
Plastic Modular Conveyor / Belt Conveyor / Conveyor Belt with Drive Manufacturer: Jamafa Condition: Used Total length: approx. 5000 mm Total width incl. motor/feet: approx. 1220 mm Total width without motor: approx. 1040 mm Conveyor width: approx. 990 mm Conveying height (height-adjustable): approx. 800 mm Material: Stainless steel/steel/plastic Strap Type: Plastic Color: green, stainless steel Including motor, including feet, height-adjustable, on wheels Frame height: 155 mm Stock: 1 piece(s) Price per piece Internal Article Number: 2026021501 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors o ...
Roller conveyor / work table / conveyor technology with drive Model: Flat Belt Condition: Used Year of Make: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Castors/ center distance: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Including side guide Feet to be ordered separately Stock: 10 pieces Price per piece Internal Article Number: 2026021902 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, ...
Belt conveyor/ webbing/ conveyor belt Year of Make: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Belt Conveyor Condition: Used Overall length: approx. 1670 mm Total width incl. motor: approx. 700 mm Total width without motor: approx. 530 mm Conveyor width/belt width: approx. 450 mm Frame height: approx. 80 mm SEW motor included Including side guide The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026022101 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloadi ...
Belt conveyor / conveyor belt / belt approx. 15.23 meters Manufacturer: Costo Year of Make: 2009 Model: Belt Condition: Used Total length incl. feed belt: approx. 15230 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 790 mm Belt width: approx. 700 mm Strap Type: Longitudinal Grooves Steel frame Frame height: approx. 105 mm Colour: Dark grey Plant consists of 8 segments 6 segments: approx. 2000 mm 1 segment: approx. 2130 mm 1 segment: approx. 1100 mm (feed belt) Internal Article Number: 2026022102 SEW motor included Feet To be ordered separately The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even und ...
Machine Details Warehouse number 1105-03498 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1020 Year of construction 2001 Control type CNC Control heidenhein 410 Storage location HAGUENAU Country of origin Taiwan Delivery time immediately Freight base from stock HAGUENAU FRANCE Technical details x-travel 1020 mm y-travel 510 mm z-travel 510 mm Table clamping surface 1200 x 600 mm Speed range - milling 60 - 8000 rpm Control heidenhein 410 Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 20 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 5500 kg Space requirement approx. 2300x2200x2600 mm Information very nice MACHINE CONTROL heidenhain tnc 410
Belt conveyor / conveyor belt / belt 18000x870 approx. 18 meters Manufacturer: Costo Year of construction: 2009 Model: Belt Condition: Used Total length: approx. 18000 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 790 mm Belt width: approx. 700 mm Strap Type: Smooth Steel frame Frame height: approx. 105 mm Colour: Dark grey Plant consists of 8 segments 7 segments: approx. 2250 mm 1 segments: approx. 2330 mm Feet to be ordered separately SEW motor included Internal Article Number: 2026022103 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralo ...
RECON -Part Number: 1605919 - Diesel ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Machine Details Stock-No. 1105-03507 Type of machine Machining Center - Vertical Make FAMUP Type MCX 600 Year of manufacture 1994 Type of control CNC Storage location FRANCE Country of origin italy Delivery time immediately Freight basis EXW 'as is where is Technical details x-travel 600 mm y-travel 400 mm z-travel 400 mm Controls FANUC OM - X-axis traverse 600 mm - Y-axis traverse 400 mm - Z-axis traverse 400 mm - number of controlled axes 3 - table surface (left-right) 400 mm - table surface (front-back) 400 mm - workpiece load (max) 300 kg - spindle revolutions (max) 6000 rpm - tool fixture ISO SK 40 - drive power (max) 11 kW - number of positions 18 - tool diameter max. 75 mm - tool changing time 2 s - space requirements length 3200 mm - space requirements width 2,900 mm - total height 2600 mm - total weight approx. 3500 kg Additional information F ...
used
RECON Part Number: 300007B V- Machine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Control, BHT 9904, Bosello, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law ...
Available with 350, 450, 500 and 820 tons cutting force. Continuous work Drive: Electric motor Motor New machine Field of application as follows: -Scrap -Windows and doors made of aluminium and plastic -Alu varieties -Types of wood (pallets, cabinets, industrial wood, more) -Mixed scrap -Bulky waste -more approx. 6 months delivery time after order Further information on request For a written offer, please write an email with your company details and address
Control, BHT 9904, Bosello, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - Excellent condition - the device looks like new - The device was tested before being put into storage at that time. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excl ...
CONVEYOR STATION LORANDI / OLI / SIPA 30/15
Complete control cabinet for Jenbacher 316; EXW
- According to layout bottle transporters - According to layout carton transporter - With central control
Bickel MPA 65 Electronically controlled Stamp Perforating machinePerforation of postal stamps, tokens, calendars. Size 900 x 650 mm with lot of tools.SCC control and positioning over monitor. Automatic central greasing. List of tools: base tools - 35,5 mm 48,28 mm 24,14 mm Perforation only with line: 48,28 mm round (big)- Ø35,5 mm 35,5 mm round (small) – Ø24,14 mm 48,28 x 40,53 mm shape of hart 48,28 mm with protection of romb 35,5 mm with protection romb Closed sizes: 48,28 x 24,14 mm 35,50 x 25,56 mm 35,50 x 29,82 mm Age: 1992 Machine tehnicaly controled/ checqued. Cleaned. With machine there is automatic delivery and jogger.
Machine Details Warehouse number 1105-03531 Machine Type Machining Center - Vertical Make DMG DECKEL-MAHO Type DMC 64 V linear Year of construction 2002 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock Technical details x-travel 640 mm y-travel 600 mm z-travel 500 mm Table size 850 x 600 mm Spindle holder ISO 40 Speed range 0 - 12000 rpm Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 30 Information CNC control heidenhain tnc 530 30X SK 40 MAGAZINE ELECTRONIC HANDWHEEL MACHINE IN GOOD CONDITION WITH SPAENEFOERDERER
aschinella details Warehouse number 1105-03533 Machine Type Machining Center - Vertical Make MAZAK Type VTC 20 B Year of construction 1996 Control type CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from location Price Technical details x-travel 1120 mm y-travel 510 mm z-travel 510 mm Tool changer 30 compartment Information Control Mazatrol M PLUS 1X 24 COMPARTMENT TOOL CHANGER SPAERNEFOEDERER With CNC control Mazatrol MPLUS , 24-fold tool changer, With CNC control Mazatrol M PLUS , ATC for 24 tools Technical data / technical details: Travel X / X-Travel 1120 mm Travel Y / Y-Travel 510 mm Travel Z / Z-Travel 510 mm Table size 1460x510 mm table load / max. workpiece weight 800 kg Tool shaft / spindle taper SK40 Speed range infinitely variable / spindle speed stepless 40-10000 rpm Number of tool places in ATC ...
Machine Details Warehouse number 1105-03545 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 B Year of construction 1991 Control type CNC Controller (FANUC 16M) MSG M 4 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 800 mm y-travel 410 mm z-travel 510 mm Controller (FANUC 16M) MSG M 4 Rapid traverse X-axis 20 m/min Rapid traverse y - direction 20 m/min Rapid traverse Z-axis 15 m/min Table area 1150 x 450 mm Tool holder BT 40 Number of tool holders 30 tool diameter 80 mm tool length 250 mm tool weight 8 kg Speed range 10000 1/min Total power requirement 5.5 / 7.5 kW Machine weight approx. 6 t Information SUPER MACHINE CNC MORI MSG M 4 FANUC 16 WITH 4 AXIS NIKKEN
Machine Details Warehouse number 1105-03546 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1230 Year of construction 2000 Control type CNC Control FANUC 18 M Storage location HAGUENAU Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1230 mm y-travel 610 mm z-travel 610 mm Table clamping surface 1400 X 610 mm Speed range - milling 60 - 8000 rpm Control FANUC 18 M Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 30 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 9800 kg Space requirement approx. 3300x2700x2600 mm Accessories Full protection - fairing Complete machine documentation Central lubrication RS 232 - Data Interface Information very nice only working in aluminium CONTROL FAN ...
Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid
Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Belt conveyor / conveyor belt / belt Manufacturer: VanderLande Condition: Used Year of Make: 2008 Total length: approx. 900 mm Total width incl. motor: approx. 850 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey SEW motor included Stock: 11 pieces Price per piece Internal Article Number: 2026031201 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your go ...
We still have 2 pieces in stock. Price ex stock and per piece
PLC control, still 1 piece in stock, price from stock pr piece
An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional
- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.
An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional
- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Belt conveyor/webbing/conveyor belt 9.77 meters Manufacturer: AMI Year of Make: 2016 Condition: used Total length: approx. 9770 mm Total width incl. motor: approx. 770 mm Total width without motor: approx. 690 mm Conveyor width: approx. 600 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: 300 mm/80 mm Incl. SEW motor 0.55 kW/r/min. 1360/87 Harness must be fitted on site Internal Article Number: 2026031801 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics ...
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Belt Conveyor/Webbing/Conveyor Belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Conveyor Total length: approx. 5050 mm Total width incl. motor: approx. 450 mm Total width without motor: approx. 330 mm Conveyor width: approx. 300 mm Strap Type: Fabric Tape Material: Steel/Aluminum Frame height: approx. 50 mm Incl. SEW motor 0.25 kW/r/min. 1300/400/1600/49.0 Includes speed control Includes 4 feet, height adjustable Internal Article Number: 2026031802 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions f ...
maximum number of results exceeded
please refine your search
