compressor piston used for sale

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

Mobile compressor for the evacuation of natural gas from pipelines for maintenance and repair to offer. There are only few trucks of this worldwide. This truck is fully operational and used to be operated only by Gas Industryi n the past! For first details please refer to attached file. The truck is located in the north of Germany (between Bremen and Hanover). A visit is possible by appointment. Further details can be provided on request. - The machine has been completly refurbished in 2022 (documentation/ certification available -> see attached picture) - The truck/ machine is fully operational - Reason for replacement was the truck/ car body ( wanted to have a modern truck – nothing to do with compressor) - Current replacement price of compressor: around 4 Million EUR – delivery time around 36-40 months - Optionally we could provide an engineer from Gas Industry for machine  ...

ALMiG Direct 75 Screw Compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class due to its unique design concept and can thus be used in a variety of ways. These fixed-speed compressors are particularly suitable for use as base-load compressors. Separation system - highest compressed air quality through proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. There are hardly any limits to communication about the possible connection to it.  Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Radiator unit - large radiators for the lowest compressed air outlet temperatures and optimum coolant temperatures System fans - powerful, efficient, powerful Drive motor - robust drive motor designed for reserve ALMiG D ...

ALMiG Gear 132 Screw Compressor The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements.  The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is almost loss-free with an efficiency > 98% and protects the drive. In addition, highly efficient separation of the coolant enables a minimum residual oil content of only 2–3 mg/m³. Due to the encapsulated design of the gearbox set, these systems are suitable for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with strong power reserves Virtually loss-free concept with efficiency > 98% Maintenance- and service-friendly drive concept  ALMiG Gear 132  Yea ...

MARK RMB 18 IVRD screw compressor was built in 2020 in Italy. The machine, consisting of reliable components, a robust housing and an easy-to-use control panel, delivers the highest quality compressed air, free of water vapour that is harmful to tools and machinery. Thanks to innovative solutions such as an efficient drive system and a perfectly optimised asymmetrical screw module, the MARK RMB 18 IVR oil-injected screw compressor saves up to 35% in energy consumption while maintaining the highest possible energy efficiency. The offer also includes a capacious tank and an integrated air dryer. The MARK screw compressor weighs 375 kg. Technical data of the MARK RMB 18 IVRD compressor - motor power: 18.5 kW - working pressure: 7 bar - maximum air pressure: 13 bar - minimum air pressure: 5.5 bar - maximum capacity (7 bar pressure): 210 m3/h - minimum capacity (7 bar pressure): 47 m ...

Used Bitzer 4TCS-8.2Y-40P (x2) & 4CES-6.F1-40S (x1) semi-hermetic reciprocating compressor rack on Freon. Complete with Bitzer LFC-210 frequency converter for the 4CES-6.F1-40S compressor, pressure and safety switch, condensing pressure switch and a control cabinet with a Danfoss controller. The compressors together have a displacement of 115,1 m³/h at 50 Hz and 139 m³/h at 60 Hz. Specifications: Refrigerant: Freon kW at +10ºC/+40ºC: 86,8 kW kW at 0ºC/+40ºC: 58,0 kW kW at -5ºC/+40ºC: 46,6 kW kW at -10ºC/+40ºC: 36,9 kW kW at -20ºC/+40ºC: 21,9 kW m³/h: 50 Hz - 115,1 m³/h & 60 Hz - 139,0 m³/h Y.o.b. 2020 - SN: 1698503699 Y.o.b. 2011 - SN: 1680811465 Y.o.b. 2011 - SN: 1680811470 Sizes: 2000x880x1680 mm (LxWxH). Amount in stock: 1

Compressor Make: BITZER Type: OSN7461-K Conveyor volume: 110-303 m3/h Speed: 1450-4000 rpm. Electric motor: 2900rpm Make: SCHORCH Type: KF5200L-AB019-06T IEC 200L IMB3 Power: 55 kW Price on request Contact details can be found under Contact

Make: BITZER Type: 6H-35.2 Conveyor volume: 110.5 m3/h Speed: 1450 rpm New Price on request

Compressor for sale: Hatlapa L15F

We sell the Kaeser SK 25 screw compressor, as a set including compressed air tank and refrigerant dryer The condition of the compressor can be seen in the attached pictures. The unit has been well maintained and is fully functional. Operating hours: 12,324h run and 2,317h load Last inspection 09/22. Until next inspection 1,029h load Technical details: -Operational -Fully automatic - Very soundproofed - Vibration damped - All panels powder-coated - For ambient temperatures up to +45 °C - Easy access to all service points thanks to removable left cover SIGMA CONTROL 2 Specifications: - Working pressure: 7.5 bar - Flow rate: 2.50m³/min - Maximum operating pressure: 8 bar -Rated power: 15.0 kW -Engine speed: 2960 rpm -Ambient temperature: 3 °C to 45 °C

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

Make: BITZER Type: 6F-40.2 Y Conveyor volume: 151.6 m3/h Speed: 1450 rpm Price on request

Manufacturer: Boge, Type: S 150, Year: 2004, Volume flow m³/min: 14,20-18,95, Operating hours: 24098, Running idle houres: 1190, Final compressed pressure bar: 7,5-13, Drive power kW: 110, FREE TEXT: Lüftermotor 4, Year :2004

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Manufacturer: Kaeser, Type: AS 35, Year: 1993, Schraubenkompressor: yes, Operating hours: 44000, Volume flow m³/min: ca.3,0, Antriebsleistung kW 1: 22, Volume flow rate m³/h: 3,3, Year :1993

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

Manufacturer: Boge, Type: VLEA 7,5 R-7, Year: 1990, Schraubenkompressor: yes, Operating hours: 4899, Running idle houres: 1434, Revolutions of main rotor U/min: 4480, Drive power kW: 7,5, Volume flow rate m³/h: 1,05, Max. Betriebsdruck : 8, Year :1990

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Make: BITZER Type: 6G-30.2Y-40P Conveyor volume: 126.8 m3/h Speed: 1450 rpm Price on request

Manufacturer: Boge, Type: Flex 37-12, Volume flow m³/min: 5,1, Operating hours: 43060, Running idle houres: 2224, Final compressed pressure bar: 10, Revolutions of main rotor U/min: 5205, Drive power kW: 37, Volume flow rate m³/h: 5,1,

Manufacturer: Boge, Type: D 63, Control: Elektrisch, Volume flow m³/min: 375, Drive power kW: 0,96, Kühlluftbedarf m³/h: 1300, Compressed air min/max bar: 2-16,

Air consumption: 48 m³/h Motor output: 5,5 kW Overall size: 620 x 980 x 1480 mm Receiver: 215 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor Bitzer Two-stage New Type S6F-30.2Y-40P Stroke volume 101m3/h Power 30Kw at minus35C Evaporation temperature 25Kw at minus40C Sale price €8,650,- Sale price €9,880,- (mounted with subcooler and insulated) Info: 0043-6641838175 or info@frigocom.at

Air consumption: 97,2 m³/h Motor output: 9 kW Overall size: 630 x 1220 x 1720 mm Receiver: 270 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 , 10

Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 p ...

Compressor ASK27T

Offered a replacement level is as good as new.

Stationary air compressor Lutos DI 70-4 Oil-free Efficiency 3100 rpm 90 kW Weight 410 kg Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Make: BITZER Type: 44VCS-12.2Y-40P Tandem compressors 2 Compressors Type: 4VCS-6.2Y-40P Conveyor volume per compressor: 34.7 m3/h On metal scaffolding Price on request

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

Make: Danfoss Type: SZ100S4VC Performer New Vacuum: - Pressure: 25bar - Temperature max: 54C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 32bar - Temperature max: 65C - Temperature min.: -35C - Volume: 3.25 litres

Used in very good condition with flanged electric motor 165KW/225HP @ 3000rpm Y400V/50hz, with coupling Cooling agent: R134A can be used for R717 Amonia 2 sets available

Bitzer Screw Compressor NEW Type HSK 7471-90-40P Stroke volume 250cbm/h 90 hp electrical power. New

Bitzer compressor type 4H-15.2Y, 73m. Lifting volume. Have 5 pcs of it.

Dimensions (L/W/H): 1070x495x895 mm Weight: 80 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x705x1800 mm Weight: 170 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 945x705x1800 mm Weight: 206 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bitzer Compressor Type 4G-20.2Y

Dimensions (L/W/H): 820x410x810 mm Weight: 64 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary vane compressor - running dry Manufacturer: Becker Type: KDT 3.140 motor: 400V 7.5 KW/50Hz suction power: 140m3/h Compression pressure: 2500 mbar (abs.) 1500 (overprint) Status: Generalueberholt and repainted Procurement: 12 months Zubehoer: - User manual We are happy to answer any questions you may have. ready for use

Key data: 2 , 10

m

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

Key data: 4 , 8

Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm Weigh ...

Key data: 4 , 12

Air compressor Industrial quality at an affordable price. Fully equipped with: Shamal Compressor Pump (Made in Italy) Two-stage, oil-lubricated pump. Condor Pressure Switches (Made in Germany) With thermal motor protection. Pressure reducer. Also available with 15 bar. The compressor has an oil-lubricated, industrial-grade two-cylinder cast iron pump. The low speed ensures quiet operation. The compressor is equipped with an integrated thermal protection for the electric motor. A pressure regulator and a pressure reducer are also installed. These compressors are often used in the commercial sector. Industrial quality. They are used, for example, where compressed air is needed around the clock. Maintenance accessories are available from stock. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (a ...