We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
136,855 used machines on RESALE, but how to find them? Machine Search
used
Offer 25452 Technical data: - Operating hours 754 h - Operating pressure up to 13 bar - Delivery rate 860 l/min - Drive 400 V / 7.5 kW - Galvanized air barrel 500 L - Integrated dryer RENNER type RKT + 0065 - Autom. Condensate Emptyer - Space requirement approx. W 650 x H 1650 x D 1400 mm - Weight approx. 350 kg
used
Motor power: 11 kW Nominal flow rate: 1.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-2
used
Chiller, cooling water circuit, heat exchanger, cooling for spot welding machine, refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit, coolant pump -Refrigeration compressor: cooling unit Cooling 7 -Type: FK 7 -Cooling capacity: 1.6 kW -Volume flow rate: 5.2 l/min -Dimensions: 570/360/H260 mm -Weight: 22.7 kg
used
feed pressure: 10.0 bar Effective free air delivery: 700 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 397 kg. total power requirement: 5.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 10.0 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15.0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. pressure: 8 bar control voltage: 24 Volt total power requirement: 15 kW Number of working hours: 20.563 h - Maximum pressure: 8 bar - Delivery quantity: 2,57 m³ / min - Nominal power: 15 kW - Control voltage: 24 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. pressure: 8 bar control voltage: 24 Volt total power requirement: 15 kW Number of working hours: 39.819 h - Maximum pressure: 8 bar - Delivery quantity: 2,57 m³ / min - Nominal power: 15 kW - Control voltage: 24 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
power capacity: ? kW feed pressure: ? bar liter capacity: ? l weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,211,5 m Nr. 4324 Screw compressor BOGE S20 Currently not ready for operation - Cause unclear / unchecked Presumably fault on circuit board Transport dimensions approx. 1200 x 1000 Weight approx. 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
volume capacity: - m³ / h Pressure power: 7,5 bar Receiver capacity: 1000 l power requirement: 11 kW Packing: ? m Shipping weight: ? ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Air consumption: 120 m³/h Pressure power: 10 bar power requirement: 15 kW Packing: ca. 1,20,81,4 m Shipping weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 10 bar liter capacity: 2,71 m³ / min motor speeds:: 3000 U/min dimensions: 1300 x 1000 x 1900 mm total power requirement: 18,5 kW weight of the machine ca.: 500 kg Features: - Focus Control 2.0 control system - Network pressure sensor - Belt-driven drive system - Soundproofed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 8 bar liter capacity: 1,65 m³ / min dimensions: 1000 x 750 x 950 mm total power requirement: 11 kW weight of the machine ca.: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
ATLAS COPCO ZR 55 VSD is a Schraubenkompressor, entwickelt für präzise Leistung, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Max. Arbeitsdruck 8,35 bar, Liefermenge 139 l/s. Technische Daten: Anschluss 400 V, installierte Leistung 55 kW; Gewicht ca. 1880 kg; Abmessungen L2400×B1020×H1870 mm. Erreicht enge Toleranzen; geeignet für Automotive, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
used
CHILLER Size: 50cm (L) x 50cm (H) PLEASE CONTACT MR. AMIRUL (+6017-9424446) Located at Factory 24
used
Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data Free air delivery: 2,100 m³/h (35 m³/min) Operating pressure: 40 bar Design pressure (PS): 42 bar Speed: 480 rpm Shaft absorbed power: 355 kW Voltage: 400 V Year of manufacture: 2003 Application: PET bottle blowing Scope of delivery 1 × High-pressure compressor 40 bar CE68 ASG 1 × Refrigeration dryer 1 × Electrical control cabinet Condition Still installed and electrically connected Available for inspection on site Availability Immediately available.
used
Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg
used
Motor power: 45 kW Nominal flow rate: 7.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1500x1000x1265 mm Estimated weight: about 700 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-4
used
BOGE screw compressor Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
used
Screw compressor CompAir Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
used
For sale is a powerful CompAir Broomwade screw compressor unit (electric motor incl. compressor stage / screw block). Ideal as a spare part, replacement unit for existing industrial plants or for export/repairers. Technical data (according to nameplate): Power: 90 kW Speed: 1,465 rpm (50 Hz) Voltage / Current: 380/415 V | 191/178 A (star/delta circuit) Year of Make: 1996 Degree of protection / frame: IP 23 | Frame C250MC As shown in the pictures, stored on pallet. Incl. suction tube / flexible hoses and device for fastening.
used
Motor power: 15 kW Nominal flow rate: 1.7 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-3
used
Stock No.: 25372-1 Technical data approx: - Boiler capacity 3000 L - Operating pressure 11 bar - Maintenance opening - Bowl diameter approx. 1150 mm - Space requirement approx. W 1350 x H 3500 x D 1350 mm - Weight approx. 700 kg
used
Serial number: 1042 Rated power: 55 kW Engine speed: 2965 rpm Max. operating pressure: 12 bar Reading operating hours: 42,522 Auction-ID: A7-49089-175
used
Motor power: 7.5 kW Nominal flow rate: 1.0 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 900x625x860 mm Estimated weight: about 200 Kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-1
used
Serial number: 1041 Rated power: 55 kW Engine speed: 2965 rpm Max. operating pressure: 12 bar Reading operating hours: 39,312 Auction-ID: A7-49089-174
used
Serial number: CAI603104 Operating voltage: 400 V Frequency: 50 Hz Connection: 7.5 kW Operating pressure: 9.75 bar Operating hours read: 31,906 Auction-ID: A7-49089-422
used
Used side channel compressor (ring blower) with directly coupled Siemens electric motor, mounted on a common base plate. The system is designed as a pneumatic high-performance pump and is suitable for industrial compressed air and vacuum applications, e.g. in food, chemical or process technology. The device is used and has clear soiling and deposits on the surface due to use. Mechanical damage is not recognizable. Scope of delivery: 1 side channel compressor with Siemens motor 1 black intake silencer (mounted) Machine type: Side channel compressor / ring blower Motor manufacturer: Siemens System description: VWB Kompl. HFM5 Pneumatic High Performance Pump Plant No.: 151505-0000 Inventory No.: 1076515 ― Length: approx. 110 cm Width: approx. 60 cm Height: approx. 70 cm Weight: approx. 175 kg Auction-ID: A7-49816-223
used
Gentilin Clinic Dry 6/90 HS – Professional dental compressor with membrane dryer & sterile filter (YOC 2018) High-quality oil-free piston compressor of the Clinic Dry series from Gentilin (Italy). Model: CLINIC DRY 6/90 HS Serial number: DKHS69025 0001 /18 Technical data: • Power: 3 kW • Voltage: 400 V / 50 Hz / 6.5 A • Speed: 1,400 rpm • Max. operating pressure: 10 bar • Tank: 90 liters stainless steel (AISI 304) • Operating mode: S1 – 100% continuous operation • Weight: 89 kg • Equipment HS version: membrane dryer + sterile filter (0.01 μm) → very dry and germ-free compressed air • Hour meter: 339 hours (white) / 95 hours (red) – extremely little run! The compressor is fully operational and in very good condition. Ideal for dental practices, dental labs, CAD/CAM or medical applications where the highest air quality is required (suitable ...
used
Stock No.: 4037 SCREW COMPRESSOR Manufacturer: POWER SYSTEM, Type: EDISON DV 2023 Serial No.: 3499890001, Year of manufacture: 2016 Specifications: Liters per minute Variable 1,8 to 4.15 m/3 Gr. pressure 10 bar Total power 30 kW Voltage 400 volts Dimensions: Length: 835 mm, Height: 1500 mm, Width: 1400 mm, Weight: 650 kg
used
Compressor met Abac-droger Diesel-oil (1) -- Naphte (2) -- Electr (3): electric Max output: 11 bar voltage: 380 volt Volume flow rate: 653 liter/min Power imput: 5,5 hp / 4 kW Volume (L): 270 liter Length: 1575 mm Width: 680 mm Height: 1150 mm
used
2 cylinders, speed 1440 rpm, low noise, with emergency stop button, capacity 750 liters per minute, pressure tank 257 liters capacity, automatic condensation drain system of the pressure tank and main shut-off valve, automatic moisture and air filter regulator, automatic shut-off at 10 bar pressure. With thermal motor protection. Polar Hiross DXB012S. S, 220 volts, with automatic condensation drain system on the freeze-dryer, maximum working pressure 16 bar. Auction-ID: A1-48994-20
used
Technical data Manufacturer/Brand: Chicago Pneumatic Type: CPA 15 500 D CE Year of Make: 2013 Serial Number: CAI6558403 Weight: 446 kg Working pressure: 10 bar Max. pressure: 10 bar Compressor: 11 kW, 400 V, 3 Ph Dryer: 0.58 kW, 230 V, 1 Ph Pressure vessel: 500 l, hp 11 bar Refrigerant: R134a, 0.5 kg Configuration Compressor unit with integrated compressed air dryer, 500 l pressure vessel and electronic control ES 3000. Auction-ID: A1-50026-61
used
used
Compressor Gardner Denver CLFG 41 V (01) Kompressor / Compressor Gardner Denver CLFG 41 V (01) Baujahr / Year 2011 - SN. 61.123.1401-01 Luftstrom / Capacity 4,0 / 48,0m3/h 1,5/1,8 kW / 1420/1730 /min Überholt / Overhauld 2015
used
Compressor Gardner Denver SKG-275.2V.02 (60) Kompressor / Compressor Gardner Denver SKG-275.2V.02 (60) Seitenkanalverdichter Baujahr / Year 2007 - SN. 2750748 Luftstrom / Capacity 100 m3/h SI 1,5/1,8 kW / 2800/3400min Überholt 2014 / Overhauld 2014
used
Turbo Tech centrifugal air compressor Model TIL-2700 45 m³/min, 250 kW ABB motor = 1 Unit Cooling method: water cooled Contact No: 011-64263265 [Arissa] F27
used
Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50208-5
used
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50208-72
used
Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50065-85
used
Zelfir screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 300 liters. Never used Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50208-30
used
Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50208-199
used
Sold without shelves. Auction-ID: A1-49997-58
used
Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50208-304
used
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50066-375
used
Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50066-346
used
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50066-45
used
Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-50065-215
used
Zelfir screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 300 liters. Never used Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50208-349
used
Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50208-127
used
Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-50208-279
maximum number of results exceeded
please refine your search