compressor blow used for sale

COMPRESSOR OIL FREE 90 KW ZT 110 KW ZT 7.5 BAR DRYER FD 560

Overview The CE6SG40 compressor was manufactured by the Belgian company Ateliers François S.A. in 2002. It is located at a German mineral water bottling plant and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The compressor is still mounted and electrically connected. Technical data Free air delivery: 1700 m³/h   Operating pressure: 40 bar Speed rpm: 410

High performance blower fan dust blower Built in 1967 Type 1000 275 R MD 63 m³ / s 1000 u/min 71.3 kw Manufacturer Heinrich Lühr dust technology

Rietschle, Herz, Elektror, Stephan Simens-Elmo ... separate images, data and videos available All Function Tested

Side channel blowers for silos Becker SD 6 2.4 kW, 220 / 380 V, 2880 / min 4.6 cubic meters / min = 276 cubic metres / hour, 3000 mm WS, good condition. Width 40 cm, length 75 cm, height 45 cm Weight approx. 40 kg. â?¬150 pickup in 76829 Landau, or freight shipping

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

Air Compressor Atelier Francois CE68 A, 40 bar with Dryer and Air tank Two air compressors, both type CE68A. made by Atelier Francois, Belgium in 2001 and 2000, capacity FAD is 35 Nm3 /min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank, separately installed stainless steel air dryer with integrated 1 micron air filter and radiator cooler. Air dryer has refrigerant cooled stainless steel plate heat exchanger which condensates the moisture from air. Both compressors are installed and in operation till end of 2023. Compressor Manufacturer: Atelier Francois, Belgium Model: CE68A Serial no: 20G200 Manufacturing year: 2000 and 2001 Capacity FAD: 2100 m³/h at 40 bar Operation hours: 37000 and 27000 (still running) Speed: 480 rpm Electric motor: ...

Used gas compressor Mehrer TRE 700 from a Malmberg pressurized water wash. Approx. 110,000 operating hours. Functionally expanded. With valves and pulley.

General SKU300N405 LocationBarneveld MakeAerzener Maschinenfabrik Gmbh TypeGM 7L No.734748 Year of construction1997 Pressure Pressure buildup0.75 Bar Main Features Capacity6.6 m3/Min Motor4 KW Pressure0.8 Bar Specified Features - Blower Blowercheck Capacity6,6 m3/min Motor4 KW 400/690 Volt Inletdia.100mm Outletdia.100mm MaterialMild steel Information Mounted on framecheck Floorspace1,4x0,6 M Total height0,8 M Weight600 KGBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

The GM 25 S unit can be adjusted to your performance data. If you have any questions, please do not hesitate to contact us.

A GM 35 S Delta Blower unit is offered. The blower stage is completely overhauled. The blower power can be adjusted to your needs. If you have any questions, please do not hesitate to contact us.

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Stralfors, side channel blower side channel blower with control box and filter -Type: 739641 704793-04 -Serial No: 04-BLOW-16 -Drive: Emerson Electric 250W -Speed: 2850 rpm -Individual components: see photos -Dimensions: 460/370/H310 mm -Weight: 20 kg

General SKU275U480 LocationBarneveld MakeAerzen TypeDelta Blower No.811073 Year of construction2003 Pressure Pressure buildup1 Bar Main Features Capacity3.21 m3/Min Motor5.5 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity3,21 m³/min Motor5,5 kW InletDN50 OutletDN50 MaterialStainless steel Information Total height1,1 m Weight230 kg Floorspace0,8x0,8 mBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T471 LocationBarneveld MakeFima Maschinenbau GmbH TypeRC3 U180 KB6X 6 L 360 MB 280 No.1/20700737/20 Year of construction2007 Pressure Pressure buildup0.3 Bar Main Features Capacity66 m3/Min Motor55 KW Pressure0.3 Bar Specified Features - Blower Blowercheck Capacity4000 m³/h Motor55 kW InletDN400 Outlet140x140 mm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Total height1,33 m Weight1700 kg CEcheck Floorspace2,1x1,4 m ATEX compatiblecheckBlowersFima ProcessBlowers > BlowersBrand > Fima Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T472 LocationBarneveld MakeFima Maschinenbau GmbH TypeRC3 U180 KB6X 6 L 360 MB No.1/20700737/10 Year of construction2007 Pressure Pressure buildup0.3 Bar Main Features Capacity66 m3/Min Motor55 KW Pressure0.3 Bar Specified Features - Blower Blowercheck Capacity4000 m³/h Motor55 kW InletDN400 Outlet140x140 mm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Total height1,55 m Weight1700 kg CEcheck Floorspace2,1x1,4 m ATEX compatiblecheckBlowersFima ProcessBlowers > BlowersBrand > Fima Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU123P575 LocationBarneveld MakeOcean TypeK 20 R Pressure Pressure buildup0.25 Bar Main Features Capacity3.5 m3/Min Motor3 KW Pressure0.25 Bar Specified Features - Blower Blower(1x) Capacity3,5 M3/Hr. Motor3,0 KW, 380 Volt, Ex With air filtercheck With sound absorbercheck Information Floorspace1,2x0,9 M Total height1,1 M Weight325 KgBlowersOceanBlowers > BlowersBrand > Ocean What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU254S1023 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 560/20/1 ZAH No.79.016 Year of construction2016 Pressure Pressure buildup0.1 Bar Main Features Capacity0.6 m3/Min Motor5.5 KW Pressure0.1 Bar Specified Features - Blower MaterialStainless steel 2.4605 (Alloy 59) Blowercheck Capacity36 m3/h (total increase of pressure 10038 Pa, density 3,13 Kg/m3) Motor5,5 kW 400/690 volt Inletdia. 105mm Outletdia. 50mm (2x) Information Total height1,2 M Weight400 Kg CEcheck Floorspace2,0x1,2 M ATEX compatiblecheck Extra SpecificationsMax temperature 310-370 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU254S1022 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 280/50/1 WBN No.78154 Year of construction2015 Pressure Pressure buildup0.005 Bar Main Features Capacity7.8 m3/Min Motor0.55 KW Pressure0.005 Bar Specified Features - Blower Blowercheck Capacity472 m3/h (total increase of pressure 510 Pa, density 1,197 Kg/m3) Motor0.55 kW 220-240/380-420 Volt Inletdia 135mm Outletdia. 105mm MaterialMild steel Information Total height1,0 M Weight120 Kg CEcheck Floorspace0,6x0,5 MBlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU252T387 LocationBarneveld MakeAerzen TypeGMA 15.12 No.719988 Year of construction2015 revisie Pressure Pressure buildup0.6 Bar Main Features Capacity152 m3/Min Motor14.85 KW Pressure0.6 Bar Specified Features - Blower Blowercheck Capacity152 m³/min Motorcheck With air filtercheck Inlet240 mm Outlet200 mm Information Mounted on framecheck Total height2,5 mm Weight3200 Kg CEcheck Floorspace2,8x1,6 mmBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T510 LocationBarneveld MakeFerrariventilatori TypeFS 311 P4XRD90 Mach.No.1978778 Specified Features - Blower MaterialStainless steel Information Year of construction2019 CEcheck Technical specs Extra information1910 rpmBlowersFerrariventilatoriBlowers > BlowersBrand > Ferrariventilatori What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0279 LocationBarneveld MakeKonrad Reitz Ventilatoren GmbH & Co. KG TypeKXE 200-002530-00 No.290567 Year of construction2012 Pressure Pressure buildup0.2 Bar Main Features Capacity25 m3/Min Motor30 KW Pressure0.2 Bar Specified Features - Blower Blowercheck Capacity1500 M3/h Motor30 kW 400/690 Volt With sound absorbercheck Inletdia. 180mm Outletdia. 90mm Information Total height4,5 M Weight1250 Kg CEcheck Floorspace2,3x1,6 MBlowersReitzBlowers > BlowersBrand > Reitz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU001M033 LocationBarneveld MakeDietrich Reimelt TypeGMA 10,0 No.316484 Year of construction1989 Pressure Pressure buildup0.3 Bar Main Features Capacity1 m3/Min Motor3 KW Pressure0.3 Bar Specified Features - Blower Blower(1x) Capacity1 M3/Min. Motor3 KW, 220/380 Volt With air filtercheck With sound absorbercheckBlowersDietrich ReimelBlowers > BlowersBrand > Dietrich Reimel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU336N535 LocationBarneveld MakeBusch Vacuumteknik A.S.[DK] TypeWA3080CO No.43570 / 931080 Year of construction2005 Main Features Capacity19.45 m3/Min Motor22 KW Specified Features - Blower Blowercheck Capacity288 - 1167 m3/H Motor22kW, 400-690/480-630 Volt With air filtercheck Inletdia.125mm Outletdia.125mm MaterialMild steel Information Mounted on framecheck Floorspace1.8x0.8 M Total height1.6 M Weight560 KGBlowersBuschBlowers > BlowersBrand > Busch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU254S211 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 1000/20/1 ZAH No.78153 Year of construction2015 Pressure Pressure buildup0.0459 Bar Main Features Capacity13.3 m3/Min Motor18.5 KW Pressure0.045 Bar Specified Features - Blower Blowercheck Capacity799 m3/h (total increase of pressure 4587 Pa, density 0,65 Kg/m3) Motor18.5 kW 400/690 volt Inletdia. 190mm Outletdia. 190mm MaterialStainless steel Information Total height1,7 M Weight1400 Kg CEcheck Floorspace2,3x1,5 M Extra SpecificationsMax temperature 450 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

General SKU298M407 LocationBarneveld MakeKaeser Kompressoren TypeWVC-4000 No.1002 Year of construction2004 Pressure Pressure buildup0.05 Bar Main Features Capacity61.1 m3/Min Motor11 KW Pressure0.05 Bar Specified Features - Blower Blower(1x) Capacity61,1 m3/min Motor11 KW, 400/690 Volt Inletdia. 200mm Outletdia. 200mm MaterialMild steel Information Floorspace1,5x0,55 M Total height0,5 M Weight480 KGBlowersKaeserBlowers > BlowersBrand > Kaeser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU252T444 LocationBarneveld MakeAerzen TypeDelta Hybrid D 62 S/DN 200 No.61-359839-00 Year of construction2012 Pressure Pressure buildup0.6 Bar Main Features Capacity51.06 m3/Min Motor75 KW Pressure0.6 Bar Specified Features - Blower Blowercheck Capacity51,06 m³/min Motor75 kW InletDN 200 OutletDN 200 Material Information CEcheck Floorspace1,7x2,1 m Total height2,1 m Extra SpecificationsIntake temperature: 20 °C Final temperature: 82 °C Compressor speed: 7054 rpm Motor speed: 2980 rpm Pressure difference: 0,600 bar Oil quantity: 8,70 Ltr. BlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more m ...

General SKU030W290 LocationBarneveld MakeReimelt TypeGMA 12.4 No.377340 Year of construction1992 Pressure Pressure buildup1 Bar Main Features Capacity7.8 m3/Min Motor11 KW Pressure1 Bar Specified Features - Blower Blower(1x) Capacity7,83 M3/Min Motor11,0 KW With air filtercheck Information Floorspace2,1x1,1 M Total height1,0 M Weight680 KGBlowersReimeltBlowers > BlowersBrand > Reimelt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU105Y745 LocationBarneveld MakeAerzener TypeGMA 12.4 No.242975 Year of construction1982 Pressure Pressure buildup1 Bar Main Features Capacity8.6 m3/Min Motor15 KW Pressure1 Bar Specified Features - Blower Blower(1x) Capacity8,65 M3/Min Motor15,0 KW, 380 Volt With air filtercheck Information Mounted on framecheck Floorspace1,5x0,7 M Total height1,1 MBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU320S562 LocationBarneveld MakeAerzen TypeGM 7 L No.703955 Year of construction1994 Pressure Pressure buildup1 Bar Main Features Capacity6.9 m3/Min Motor7.5 KW Pressure1 Bar Specified Features - Blower MaterialMild steel Blowercheck Capacity6,9 m3/min Motor7.5 kW 400/690 Volt With air filtercheck Inlet390x55mm Outletdia. 150mm Information Mounted in sound absorbing boxcheck Total height1,1 M Weight380 Kg Floorspace1,4x0,8 MBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU435U1420 LocationBarneveld MakeAerzen TypeGM15L Year of construction2012 Pressure Pressure buildup0.7 Bar Main Features Capacity17.3 m3/Min Motor37 KW Pressure0.7 Bar Specified Features - Blower Blowercheck Capacity1038 m3/h Motor37 kW, 400/690 Volt, 2965 rpm With air filtercheck With sound absorbercheck OutletDn 100 MaterialMild steel Information Floorspace1,3x1,35 m CEcheck Total height1,50 m Weight511 kgBlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU287P484 LocationBarneveld Makeunknown, manufacturing tag is missing Year of constructionunknown Main Features Motor4 KW Specified Features - Blower MaterialMild steel Blowercheck Capacity(unknown) Motor4,0 KW, 400 Volt (CE) With air filtercheck Inletdia.60mm Outletdia.55mm Information Mounted on framecheck With switchcheck Floorspace0,8x0,9 M Total height1,4 M Weight250 KGBlowers-Blowers > BlowersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Low-pressure blower GMB 14.8, built 1994, with 11,8 m³/min. volume stream at delta-P = 360 mbar, P1 = 0,64 bar. 44 kW / 1.485 RPM drive, with flow check valve, pressure-limiting valve, tank, air filter, base frame and sound insulation hood.

CAP.: 10 000 BTLS/H OF 1.5 L,

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

; ready for operation

Technical data: 2 stations wind moulding machine, extrusion PE 90 mm, 50 points Moog Programmer, control Geforn 186-th wind volumes max. 5,000 cubic centimetres

see pictures

The rotary piston blower is general-outdated. of the blowers is also to be had with impulse.

The blower is with side admittance completely with impulse.

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Power: 22 m3/min., Delta P 320 = mbar, 30 kW, (10.6 kW at 1690 RPM)

Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2