135,906 used machines on RESALE, but how to find them? Machine Search
Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg
Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991
Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991
TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
Pressure power: 10 bar Pressure power: 150 l/min. tank: 150 l cylinder: St. With tank from Boge 150 litersThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg
Key data: 75 , 10 , 691
Parameters: -Max. pressure 10 bar - capacity 691.2 m3/h - power 75 kW - Built-in dehumidifier - PREVENTIVE MAINTNANCE support in 2019.
Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm Isbmrc Iporp D Uxenjtf width: 1600mm height: 2000mm weight: 4400 kg
SPECIFICATIONS: Air flow rate L/min: 6000 Operating pressure bar: 8 (variable max 13) Installed power KW: 30.0 Complete with inverter Operating hours: approx. 8000
feed pressure: 10 bar Effective free air delivery: 252 L/min Receiver capacity: 90 l / bar Number of cylinders: 1 Stk. motor: 400Volt / 1,5KW V / KW turning speeds: 777 U/min weight of the machine ca.: 70 kg. range L-W-H: 0,97 x 0,5 x 0,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 50
Atlas Copco GA50VSD Screw air compressor in good condition.
ATLAS COPCO screw compressor mod. GA37 – CE compliant – used - 37 kw - 7.5 bar - 104 l/s - matr. AII 318838 - year 1995 - COMPLETE WITH MANUAL AND CE DECLARATION
Atlas Copco SF 15 Oil-Free Scroll Compressor The SF series uses scroll technology, where there is no metallic contact with the compression elements, which is why absolutely no oil is needed in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g. in the laboratory, medical or food sectors). The three installed scroll compressor elements were recently overhauled or replaced. Operating hours (total): 15,983 hours (The actual time the compressor has been running since 2001). Regulator hours: 99,527 hours (the time the controller was energized). Runtimes of the individual scroll elements (compressor stages) Operating hours Element 1: 735 hours Operating hours Element 2: 735 hrs Operating hours Element 3: 736 hrs Technical data: Manufacturer: Atlas Copco Model / Product Type: SF 15 (Oil ...
Motor power: 45kW, max. volumetric flow rate: 140l/s at 8bar, max. operating pressure: 13bar. Documentation available. Inspection by appointment is possible.
Key data: 73 , 3
Screw compressor, 500 V drive, serviced
Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank
Key data: 160 , 8 , 1170
For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037
Key data: 250 , 8 , 2322
For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg
Offered are two variable-speed rotary screw compressors Atlas Copco with integrated refrigerated air dryers. Motor power: 37kW, operating pressure: 4bar-12.75bar, max. air delivery at 7bar: 7.76m³/min, refrigerated air dryer: Type ID 96. Machine dimensions per compressor X/Y/Z: 1260mm/780mm/1590mm. Documentation available. Inspection possible by arrangement.
# Industrial Air Compressor Atlas Copco GA 250 FF – Full Feature Overview Industrial compressed-air compressor manufactured by Atlas Copco, model GA 250 FF (Full Feature), offered as a standalone industrial unit. The equipment features a complete enclosed casing, integrated electrical and control systems, and ventilation and extraction ducts associated with the installation. The compressor is designed for industrial compressed-air applications and is suitable for facilities requiring a dedicated air compression unit, subject to verification of its technical specifications and suitability for the intended application. According to the available listing information, the compressor is practically unused and in very good overall condition. The equipment is offered installed in its current location in Vícar, Almería, Spain, together with the components and accessories func ...
Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.
Atlas-Copco GA30 10 bar Max output: 10 bar Volume flow rate: 85 liter/sec Power imput: 30 kW Weight: 509 kg
Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg
Atlas-Copco GA45 10 bar Max output: 10 bar Volume flow rate: 119 liter/sec Power imput: 45 kW Weight: 692 kg
Offered for sale is a rotary screw compressor with an integrated refrigerant dryer. Volume flow rate: 1.82m³/min, operating pressure: 9.75bar. Controller: Atlas Copco Elektronikon Graphic with display. Equipped with an integrated refrigerant dryer (FF version) and emergency stop switch. Inspection possible by arrangement.
An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.
Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192
feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data: - Operating hours 20256 h - Operating pressure 13 bar - Delivery rate 4.09 m³/min - Drive 400 V / 26 kW - Motor speed 3000 rpm - Space requirement approx. W 900 x H 1750 x D 900 mm - Weight approx. 490 kg
Key data: 22 , 8 , 2
Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)
A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.
Atlas-Copco 1500 liter tank pressure vessel
Compressor: 13 bar Dryer Atlas-Copco FD220 14 bar Volume flow rate: 8.52 m3/min Power imput: 50 kW
Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153
Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l
Compressor Atlas Copco Type GA 11 C Technical data: - Data: see nameplate
Specifications Brand: Atlas Copco Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198 kg. Assets: 5.5 kW Noise level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0-10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm Machine status: Very good Electrical connection: 3 phase Missing parts: No Photos/video available: Photos available 10.2.192
A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment.
Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled
Atlas-Copco GA11P FF 9,8 bar Diesel-oil (1) -- Naphte (2) -- Electr (3): electric Low press. (1) High press (2) Screw (3): 9,8 bar Volume flow rate: 1,82 m3/min Power imput: 11 kW Length: 1260 mm Width: 720 mm Height: 1480 mm Weight: 455 kg
The following are offered: 3x Kaeser compressors, 1x Gieb compressor, 1x Atlas Copco compressor and 1x Maschinen- und Behälterbau pressure vessel. 1) Gieb compressor, 750/250-11, year of manufacture: 2005, max. operating pressure: 11bar, intake capacity: 750l/min, power requirement: 4.0kW. 2) 3x Kaeser EPC 630-150 compressors, year of manufacture: 1995, max. operating pressure: 10bar, displacement: 630l/min, motor power: 3.0kW. 3) Atlas Copco LT compressor with sound enclosure, operating pressure: 15bar. 6) Maschinen- und Behälterbau pressure vessel, volume: 350l, year of manufacture: 1997, max. operating pressure: 16bar, temperature range: -10°C to +50°C. An on-site inspection is possible.
ATLAS COPCO ZR 55 VSD is a Schraubenkompressor, entwickelt für präzise Leistung, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Max. Arbeitsdruck 8,35 bar, Liefermenge 139 l/s. Technische Daten: Anschluss 400 V, installierte Leistung 55 kW; Gewicht ca. 1880 kg; Abmessungen L2400×B1020×H1870 mm. Erreicht enge Toleranzen; geeignet für Automotive, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg
feed pressure: 9,8 bar : 2,39 m³/min Number of working hours: ca. 85.410 h total power requirement: 15 kW weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Total rated power: 250 kW. Maximum working pressure: 4 bar. Rotational speed: 1,879 rpm. Gross weight: 5,662 kg. Technology: variable speed drive VSD. Air quality: oil-free, ISO 8573-1 Class 0. WEG frequency converter. Serial number: APF239403.
maximum number of results exceeded
please refine your search
