complete plant used for sale

For Sale: Complete 10 MW / 2 MW Cogeneration Power Plant Available for immediate acquisition: a fully integrated power plant for the combined and efficient production of heat and electricity through a cogeneration system. Technical Description: The whole installation (Model: E.V.A.) for sale includes components listed below: STEAM BOILER Manufacturer: Wehrle Werk Year: 1999, Heating capacity: up to 10 MW Fuel type: biomass/RDF Fuel gas volume: 20.000 Nm³/h Fuel consumption: approx. 2500 kg/h Fuel need: approx. 20 000 t/a Average combustion temperature: approx. 900°C Main steam pressure: water steam with 40 bar Main steam temperature: 410°C Main steam mass flow: 11 t/h Combustion power gross: max. 10.000 kW Combustion power gross: min. 7000 kW Water content: 25 m³ STEAM TURBINE Manufacturer: KKK / Siemens SST110 Electrical capacity: up to 2 MW Year: 1999, serial  ...

GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale

Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...

The plant consists of two production units: Production Line B and Pre-Mix Unit 5 (MA5). PRODUCTION LINE B Production Line B is a complete nonwoven needlepunch line consisting of the following components listed in process order. 1. Suction / Filter Station (Filterstation) Function: Fiber dust extraction and air filtration for the production line. 2. Feed Shaft Manufacturer: Spinnbau Bremen Machine length: 3,970 mm Machine width: 2,600 mm Machine height: 6,233 mm 3. Belt Scale with Vibrating Shaft - Protec Vibrating Shaft: Length: 880 mm Width: 2,800 mm Height: 1,500 mm Weight approx.: 870 kg Belt Scale: Length: 550 mm Width: 3,000 mm Height: 700 mm Weight approx.: 550 kg Power supply: 3NAC 400V 50Hz 20A Description: The vibrating shaft produces a uniform fiber feed. The belt scale measures the weight of the fiber material being transported and regulates the feed spee ...

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - .ucymachines/ Contact us at - sales@ucymachines

Description Item # 9355 - COMPLETE CANDY FACTORY 2000 m² facility (two 1000 m² buildings) The sale includes trademarks, patents, formulations, existing stock, and customer base. Also available are the buildings if a buyer is interested in taking over the complete factory operation. The plant has four production lines: One line can produce 1000 kg/hour of candy, One line 800 kg/hour of Ball Lollipops, One line 300 kg/hour of Flat Lollipops (6g pieces), One line 400 kg/hour of 13g pieces. The machines have been regularly maintained and serviced since their purchase. Available from May 2027 The sale is for the complete plant only; individual units or blocks are not available for purchase. KITCHEN Installation including ATTSU Cookers (year 2000), CONFITECH Cooker (year 2012), RUFFINATI ME70 Mixer (2005), CONFITECH ME70 Mixer (2018), CONFITECH IM70 Kneader (2018) LOLLIPOP FORMING AND WRAPPI ...

Next TETRA PAK TBA 19 125ML SLIM COMPLETE LINE FOR SALE Item #: Usm-182 Category Tetra Pak TBA 19 TBA 19 125ml Filling Machine,Version 10v Year of manufacturing 2003 Tetra Straw Applicator TSA 21, Year of manufacturing 2003 Tetra Packer, TCBP 70, Year of manufacturing 2003 Tetra Shrink TTS 51, Year of manufacturing 2003 Tetra Easy Ride & Conveyors Control System Conveyors & Paper Trolly Condition: Excellent & tetra pak maintained.

USED TETRA PAK TBA 19 200ML SLIM 20V COMPLETE FILLING LINE FOR SALE YEAR 2006 Item #: Usm-202 Category Tetra Pak TBA 19 TBA 19 200ML SLIM COMPLETE FILLING LINE Filling machine TBA/19 TBA 200 Slim, Version 20V, Year 2006, Working hours 29000 Straw Applicator Tetra Straw Applicator 21 Cardboard packer TCBP 70 Automatic palletisation unit Conveyors & Paper trolly

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl, ...

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - .ucymachines/

Available immediately from operational European factory. Equipment professionally maintained and in excellent technical condition. FLAT KNITTING MACHINES - Steiger Antares 3.130SC Freegauge, E14 (E7/E14), Switzerland Quantity: 1 unit Year: 2019 - Steiger Antares 3.130 SC, E14, Switzerland Quantity: 5 units Year: 2019 - Steiger Antares 3.130 SC Fully Fashion, E16, Switzerland Quantity: 1 unit Year: 2019 - Stoll ADF 530-32 Multi Gauge Quantity: 1 unit Year: 2018 SOFTWARE Programming Software Model+ by Steiger, Switzerland Quantity: 1 unit Year: 2019 LINKING MACHINES - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2019 - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2018 - Exacta Ultravision Stoptronic Italy E22 Quantity: 4 units Year: 2019 SEWING MACHINES - Exacta Cupseamer Quantity: 1 unit Year: 2019 - Durkopp Adler 281-140342-03, Single Needle  ...

Unused Complete Outlet Triclamp including Outlet Pipe + Sleeves + Impellors Tetra Pak BM618 / BM714 Bactofuge, Machine unit number or subassembly description: 562012-03 according outlet device drawing., Type of Machine: Complete outlet

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

A complete industrial sawmill production line( Year of Manufacture : 2000) is available for sale , it includes the following elements: 1 - Log Yard Manufacturer: Hobest AG / EWD / Microtec / Herzog Forsttechnik Includes: • 3x Feed conveyor type NQF Hobest • 3x Step conveyor type HSF Hobest • 2x Block conveyor type BZ 500 Hobest • Chain swing saw with log holder type DSH/EWD-Stihl • Block conveyor with rotating device type BZ 500/S Hobest • Metal detector with conveyor type MSG/120 EWD • Tapered roller track type RGK Hobest • Root end reducer type Hobest Primus • Debarker type ER 90 EWD • Tipping trough type RKW/500 Hobest • Cross conveyor type NQF Hobest • Block conveyor type BZ 500-1E Hobest • Log measurement system type Kemes Keba • Sorting block train type BE 500/SA Hobest • Central hydraulic unit Hobest • Electrical control system  ...

General SKU306Y632 MakeElajo TypeFB-01 No.T212081 Main Features MaterialStainless steel Motor18 KW Surface2 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfacedrying: 1.8 m²: cooling: 0.2 m² Bed sizes4 000 × 500 mm Number of sections:3 (2 drying + 1 cooling) Air inletcheck Air outletcheck Drive with excentriccheck Motor3kW, 380V With variable speed drivecheck With fancheck Motor15 kW, 380V Capacitydryer: 8 000 kg/h: cooler: 750 kg/h Heating unit (electric)check Max. temperature135 °C MaterialStainless steel 1.4404 (316L) General Year of construction2021 Extra Specificationswith supporting system components (no standalone motor / part of scope):Infeed buffer tank ~1 m³, AISI 316L, CIP-prepared, with level indicator + reject valveBack-mixing system (dry-product recirculation)CIP system (nozzles in dryer, mixer, buffer t ...

Used complete line for the preparation, sorting, packaging, and storage of onions. Manufactured in 2013–2014. Manufacturers include WYMA, Allround, ZETA, EMVE, Newtec, JASA, IPLA, Tong Peal, Htech, and Jonge Jans. Processing scope: On-loading and feeding of onions, washing/polishing, drying, green top trimming, inspection, size sorting, buffering, weighing, packing in mesh bags/plastic film/cartons, palletizing, dust removal, and loading into storage chambers. Nominal line capacity: 10 t/h for the main processing line—limited by the ZETA ORC850-3 trimmer. In practice, 7.0–8.5 t/h at an OEE of 70–85%. Packaging: JASA J350QP: up to 40 packages/min according to a comparable offer. This corresponds to approx. 6 t/h at 2.5 kg or 12 t/h at 5 kg. Palletizer: up to 10 cartons/min, i.e., 6 t/h for 10 kg or 12 t/h for 20 kg. Energy: Installed power after adjustments: 18 ...

General SKU314Y648 LocationBarneveld CEcheck Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor0.65 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity100 l. (128 l.) Vessel sizesø 600 × 530 mm Dished bottomcheck Dished top sidecheck Top connectionsDN25 — DN80 OutletDN50 bottom outlet valve With jacketcheck Max. temperature—85 / 200 °C With propellor stirrercheck Motor0,65 kW (230/400 V 1400 rpm (Ex)) Speed mixing shaft0—600 rpm With jacketcheck Glass Reactors MaterialGlass, Glass - Enamel (3009U) General MakeQVF Engineering GmbH / De Dietrich Serial70083 TypeADB865 Reactor 100 L Year of construction2009 Mounted on legscheck Floorspace2,37 x 1,2 m Total height3,3 m Extra SpecificationsDesigned for GMP laboratory applicati ...

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Kawasaki Gas Turbine Cogeneration Power Plant 34 MW / 60 Hz This modern 34 MW Kawasaki L30A Gas Turbine Power Plant is a highly efficient and environmentally friendly cogeneration facility designed for industrial and utility-scale power generation. Manufactured in 2020 and maintained in excellent condition, the plant combines reliable electrical generation with heat recovery, achieving total fuel utilization efficiency of up to 85.5%. Operation was stopped on Stopped in March 2024 in good condition and the plant was preserved with KHI’s maintenance instructions. The plant is powered by a Kawasaki L30A two-shaft industrial gas turbine featuring a 14-stage axial-flow compressor, advanced Dry Low Emission (DLE) combustion system and high-efficiency turbine technology. The unit delivers approximately 34 MW electrical output with thermal efficiency exceeding 41%, while maintaining exce ...

ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

Power plant (Lambion-Howden-Scheuch-Hamworthy) History - Commissioning: 2009 - Power plant built for the heat supply Manufacturer: Lambion Siemens (turbine, measurement and control technology) Imtech (electrics and performance data: 950 kW rated electrical power 2.00 MW rated thermal output HT(128 128°C) 1.50 MW thermal output NT (85 85°C) 6.74 MW thermal firing capacity Steam output: 7.5 t/h approx. 11,000 tonnes of fuel required per year LPM and WHS Boiler Manufacturer Lambion Year of construction 2008 Maximum steam production [t/h] 7.5 Max. permissible pressure [bar] 32 Max. permissible vapour temperature [ [°C] 440 Turbine / Generator manufacturer Howden Machine TWIN CA 34 Year of construction: 2008 Generator manufacturer: AvK Generator Generator type: DSG 74 M2 System data: Flue gas cleaning Manufacturer Scheuch Condenser / recooling manufa ...

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for modernization were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating eleme ...

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Find m ...

Description Item #9003 – CANDY RECYCLING PLANT Manufactured by CANDY RECYCLING INSTALLATIONS (Netherlands) Model AD-2000 For recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products Result after recycling: Completely transparent and neutral sugar-glucose syrup-water solution Output 1000 - 2000 kgs / 8 hours shift. Consisting of: DM-500-IC dissolving machine. Intermediate/buffer tank, volume 2000 L, with platform. RD-VF-2500 Horizontal rotary drum vacuum filter unit.

Description Lot 3 - MOGUL KITCHEN 2 TER BRAAK Cooking Set Up. Including Control Panels, Vacuum Vessel, Cooking Vessel, NEWADE Outfeed Vessel, Pumps. Associated controls, pipework etc

Description Lot 4 - MOGUL KITCHEN 3 TER BRAAK Cooking Set Up. Including Control Panels, Vacuum Vessel, Cooking Vessel, NEWADE Outfeed Vessel (1988), Pumps. Associated controls, pipework etc

Description Lot 6 - BATCH FLAVOUR & COLOUR MIXING ROOM With a quantity of stainless steel mobile holding tanks, batch weigh station with pumps and Silverson Batch mixer on floor mounted frame for secondary mixing prior to distribution to production

Description Lot 7 - MOGUL PRODUCT REWORK Mogul Product Re-Work System with WINKWORTH Rework Dissolving Tank from year 2013, Pipework & Pumps, NEWADE Stainless Steel Vessel from year 1988. Allen Bradley PanelView controls

Description Lot 9 - STARCH MOGUL LINE Manufactured by NID (no machine plates.) without Depositing Heads. With mould loader and unloader, with Starch Feed Tipping Station with Product Outfeed Conveyors & Candy Cleaning Conveyors. has been rewired quite recently. DCE Units, Control Panels

Description Lot 10 - STARCH MOGUL LINE Manufactured by NID Model M3000. without Depositing Heads. With mould loader and unloader, with starch loader, with Product Outfeed Conveyors & Candy Cleaning Conveyors. Allen Bradley PanelView 1000 & Plus 1250 controls DCE Units, Control Panels (Was running with Vomatec cooking/flavouring system lot #11)

Description Lot 15 - SUGAR COATING LINE with product was hand fed from trays into an infeed station where different colour/flavour products were mixed product infeed conveyoring BUHLER separator/ vibrators with extractor for product cleaning into a Raw Sugar Infeed Conveyor/System (from bulk bags), large Sugar-Coating Drum, Inclined Conveyor to Oil Enrober with preparation kitchen where product is coated after sugar drum before further conditioning (which was a product specific requirement).

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Four nearly new moulds for garden wall and fence.

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...