comp used for sale

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Included Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates Documents available

for gas turbine - 19 bar - 75 KW

full function, can be programming for robot, etc. Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 6000 kg

feed pressure: 8 bar : 3,2 m³/min Number of working hours: 32.337 h total power requirement: 18,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible.

Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible.

A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible.

Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrig ...

A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment.

Brewing plant with a mash-out wort volume of 20 hl, comprising the following components: 1. Malting plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, malt conveyor and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels with copper lids, spindle station and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Pressure tank cellar with 2 x pressure tanks (Speidel, 2021, 86 hl, 3 bar) and 1 x pressure tank (INOX, 2018, 67 hl, 3 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17–20 kegs/h) 6. Refrigeration system acting as an ...

Oil-free wisAIR air compressor including refrigerated air dryer and air filter. Air compressor: - Max. working pressure: 13 bar - Capacity: 146.5 l/s - Motor power: 55 kW Stationary, single-stage screw compressor with water injection, driven by a speed-controlled electric motor. The compressor is enclosed in a soundproof housing. Condensate is drained automatically., Additional title: Oil-free screw compressor with refrigeration dryer and compressed air filter, Capacity: 8,79 m3/min, Max. working pressure: 13 bar, Motor drive: 5200 rpm, Power: 55 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 2,60 m, Width: 0,97 m, Height: 2,00 m, Weight: 1195 kg, Features: Screw compressor; Refrigeration dryer; Compressed air filter

Screw compressor for generating compressed air., Additional title: screw compressor, Flow rate: 4 m³/min, Discharge pressure: 13 bar, Frequency: 4245 1/min, Power: 37 kW

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: Screw compressor with refrigeration dryer and compressed air filters, Operating hours: 2169, Flow: 1,32 m³/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE Oil filter, oil separator tank, oil drainage system

This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information.

Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized ...

Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: u ...

Used Kombi complete water filling line 12000 BPHTechnical Specifications & Performance DataThis used Kombi bottling line is a complete PET water production system designed for efficient, reliable beverage production. With a nominal capacity of 12,000 bph, it suits medium-scale operations seeking second hand industrial packaging equipment. The line includes a blow molder by SMF, a filling unit by Kombi, an OPP labeling machine by NDS, and a shrink packaging system by Kirveli, integrated with conveyors for continuous flow.Production speed: 12,000 bphYear: 2014Product: WaterContainers: PET bottlesBottle formats: Compatible with 0.33L, 0.5L, 1.5L bottle formatsNeck finish: 2925Blow molding: SMFFilling: Kombi engineeringLabeling: NDS OPP labeling technologyShrink packaging: Kirveli shrink wrapperControl: Mitsubishi PLCAdvanced Automation & Control SystemsThe line is equipped with a Mitsubishi ...

Used complete isobaric glass line for wine - 2000BPHTechnical Specifications & Performance DataIsobaric filling for glass containers at 2000 bottles/hour. Core equipment includes a Cobert SUPREMA filling machine and a SIAT SM11-S case sealer, supplied ready for operation. This complete glass bottling line covers wirehooding, pasteurization, product transfer, and closure orientation.Speed: 2000 Bottles/hourContainers: GlassKey equipment: Cobert SUPREMA filling machine; SIAT SM11-S case sealer; wirehooder; mesh tunnel pasteurizer; lobe pump; cork orienterComponent years: 1986 (wirehooder), 1993 (pasteurizer), 2007 (case sealer), 2008 (cork orienter)Pasteurizer capacity indicator: Mesh area 6.5 m²Electrical data (case sealer): 380/415V, 50Hz, 3PH, 1.08A, 260WCompliance: CE markings on componentsAdvanced Automation & Control SystemsLocal operator panels support setup and diagnostics. The SI ...

Used complete CSD canning line 2018 - 24.000 bphTechnical Specifications & Performance DataThis complete CSD canning line is a second hand, used bottling line configured for aluminum cans and engineered for reliable beverage production. Manufactured by ZhongChen, the line is designed to deliver consistent quality for carbonated soft drinks at industrial packaging scales. It features a comprehensive equipment set from mixing through downstream wrapping, enabling smooth, continuous operations.Production Speed: 24,000 bphContainer Type: Aluminum cansAvailable Volume Range: 0.33LProduct: CSD (carbonated soft drinks)Build Year: 2018 (major equipment)Main Equipment: Mixer, Filling Machine, Can Seamer, Can Rinser, Can Warmer, Shrink Wrapper, Depalletizer, Conveyor System, COP SystemManufacturer: ZhongChenAdvanced Automation & Control SystemsThe line is arranged for synchronized operation across ...

Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automatio ...

Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,30 ...

Gea Procomac Used Complete Bottling Line These are machines that are part of a bottling line having the following characteristics. • Bottling line speed: 7,000 / 8,000 bt/h of 75 cl sparkling wine and 10,000 / 11,000 bt/h of 75 cl still wine • Bottling line designed for the bottling of the following formats: 20cl – 37.5cl – 75cl – 150cl Below is the year of manufacture for each piece of equipment with the relative sale price: 1. Bortolin-Kemo depalletiser – year of commissioning: 1993 Filling 2. Gea Procomac filling monoblock – year of commissioning: 2000 Including: Gea Procomac rinser – 54 taps Ozosteril Gea Procomac for the production of ozonated water to be used in rinsers – year of commissioning: 1993 Gea Procomac isobaric filler – 56 taps Cork capper Arol – 8 heads (set of mouthpieces for mushroom cap and set of mouthpieces for flat cap) Arol screw capper – 8 ...

Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatt ...

Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line  ...

Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autocla ...

Technical Specifications & Performance Data The Used Complete Bottling Line Krones, from the year 2015, is engineered for high-efficiency operations within the beverage production industry. Designed to process up to 48,000 bottles per hour, this second-hand machinery is ideal for medium to large-scale production needs. Production Speed: 48,000 bottles per hour Compatible Bottle Formats: 0.38 L, 0.55 L Container Types: PET Neck Type: 30/25 Machine Components: 12 items Advanced Automation & Control Systems This used bottling line is equipped with advanced automation capabilities and a user-friendly control panel, ensuring high precision in filling, labeling, and capping processes. The line includes integrated safety features, adhering to stringent industrial packaging standards, making it a reliable asset for operators. The electrical systems and automation technologies ensure streamlined  ...

Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle applicati ...

Used Isobaric PET Complete Bottling Line for Water CSD 18000 bph 2L Technical Specifications & Performance Data Year 2000 PET line with isobaric volumetric filling for 2.0 L at up to 18,000 bottles/hour. Built around Krones and Simonazzi equipment, it processes still water, sparkling water, and carbonated soft drinks with precise fill control and stable throughput. In 2.0 L PET service, it also functions as a CSD bottling machine within a fully integrated layout. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (2.0 L PET) Bottle formats: 2.0 L Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Fill technology: Volumetric isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air c ...

Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforwa ...

Technical Specifications & Performance Data The Used Complete PET Line for Flat Drinks Tea is designed to enhance your beverage production efficiency with a remarkable speed of 22,000 bottles per hour. Manufactured in 2001, this second-hand line offers reliable performance with compatibility for various bottle formats ranging from 0.06 L, 0.10 L, to 0.50 L. This line supports PET container types, making it an ideal choice for flat drinks and tea production. Speed: 22,000 bottles/hour Container Types: PET Bottle Formats: 0.06 L, 0.10 L, 0.50 L Year of Manufacture: 2001 Advanced Automation & Control Systems This industrial packaging solution features state-of-the-art automation provided by leading manufacturers such as Krones and others. The integrated control systems facilitate seamless operations with minimal manual intervention, ensuring precision in filling, labeling, and capping proce ...

Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products  ...

Technical Specifications & Performance Data Year 2004 complete PET line, 6000 bottles/hour, isobaric filling. This used configuration from BAT, Kosme, M.A.S is set up for soft drinks and remains in storage. As a compact piece of soft drinks bottling machinery, it covers blow molding through end-of-line packaging. Bottle Formats: 1.5 L, 2 L, 1 L Container Types: PET Product Types: Soft Drinks Speed: 6000 bph Filling: Isobaric (Fill type: 5) Production Year: 2004 Current Status: In Storage Line Composition Blow Molding Machine: Kosme KSB 4 (2004) Premix: M.A.S Mixer (2004) Filling Monoblock: M.A.S 32/32/8 (1999) Labeling Machine: BAT EBI 07 (2006) Shrink Wrapper: BAT 12 packages/min (2005) Advanced Automation & Control Systems Integrated controls coordinate blow molding, premix, isobaric filling/capping, labeling, and shrink wrapping for stable throughput at 6000 bph. Automation supports p ...

Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Isobaric valve: No PLC type: Not Existing Spare parts available: No Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4)  ...

Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 –  ...

Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL  ...

Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization le ...

Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the  ...

Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, t ...

Used Complete Bottling Line for PET and Glass 2007 Year: 2007 | Speed: 14,000 bph | Containers: PET and glass | Formats: 250 ml, 600 ml, 1 L | Products: Juice, still water. This PET bottling machinery is configured as a full factory line with depalletizing, blow molding, rinsing, filling/capping, inspection, pasteurization, packing, and palletizing. Ready for operation. This listing is used equipment for PET bottles and glass bottles in the stated formats. Depalletizer: Icon (2007) Blow Molding Machine: Sidel SBO 10/14 Four (1994) Rinsing Machine: Gem (2007) Filling Monoblock: Icon 5000 30/10 (2007) Labeling Machine: Kosme Merkur 16 T S1 S2 ADV (1995) Capping Machines: Arol EURO/PK (2007); Alcoa VK-138 Headset 55950 (2007) Inspector / Induction Sealer: Enercon (2007) Pasteurizer: Tetra Pak® (2007) Wrap Around Packer: Dimac Star Wrap 25 (2007) Lane Divider: SMI DIVIPACK 200 (2002) Pallet ...

Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, ...

Technical Specifications & Performance Data This complete mixed new–used PET bottling line is engineered for high-speed carbonated soft drink production, delivering reliable performance at industrial scale while maintaining precise isobaric filling for carbonation retention and product integrity. Nominal speed: up to 25,000 bottles/hour (format- and product-dependent) Container type: PET (line configuration optimized for PET) Bottle formats: 0.06 L, 0.25 L, 0.50 L Neck finish: PCO 1881; compatible with lightweight CSD closures Filling technology: isobaric counter-pressure for carbonated beverages Product range: carbonated soft drinks; adaptable for flavored water and energy drinks Primary equipment brands: Sipa (SFR 16 blow molder), Sacmi (isobaric filler-capper), UBL SRL (labeling), Dimac (shrink wrapping), Robopac (palletizing/stretch), SIAD (process gases and compressors), plus conv ...

Technical Specifications & Performance Data Line type: Used complete bottling line (second hand) configured for PET still water Manufacturers: Krones and Gebo Cermex Year of build: 2013 Nominal speed: up to 31,500 bottles/hour (0.35 L and 0.50 L) Bottle formats: 0.35 L, 0.50 L Container type: PET with 29/25 neck Product type: Still water (non-carbonated) Main modules: Krones Contifeed preform feeder, Krones Preform Check Inspector, Krones Contiform stretch blow molder, Krones ErgoBloc L 40-15 blow–fill–cap monoblock, Krones Checkmat cap inspector, Krones Contiroll roll-fed labeler, Gebo Cermex shrink wrapper, Gebo Cermex case packer Line condition: In production Documentation: OEM manuals available Safety: Safety features and guarding included Advanced Automation & Control Systems This used bottling line leverages Krones’ integrated line control for synchronized blow molding, filli ...

Used complete line for still wine - 8000 BPH Technical Specifications & Performance Data Runs at 8,000 bottles/hour on 0.75 L glass with straight-cork (flush-to-mouth) closure. The layout centers on a filling monoblock (2002) combining rinser, filler, and capper, followed by a capsuling/shrink unit (2002), Kosme labeling, and APE Impianti case handling. Built as wine bottling machinery for still wine, the configuration supports consistent fill levels, reliable sealing, and integrated downstream packing. Production speed: 8,000 bottles per hour Filling Monoblock: Model 36/1440.40/1440LV.6/360 RSX (Year 2002) – Rinser, Filler, Capper Capping System: Straight cork (flush-to-mouth) Capsuling/Shrinkage: Model POKER Z 6/8 (Year 2002) Compatible formats: Typical case pack pattern 12 x 0.75 L; additional formats with change parts Containers: Glass bottle handling (cylindrical containers) Label ...

Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and pack ...

Complete Bottling Line for Water (PET 1.5L) – Overview 2010 complete line for PET 1.5L water, nominal 16,000 bottles/hour (operational range 12,000–16,000 bph), isobaric with neck 28 and fill type 5. Configured for still and sparkling water and supplied in ready for operation condition. This used PET bottling machinery layout covers preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors for end‑to‑end production. Key units installed: preform tipper and elevator (2010), blow molding machine (2010), filling machine (1999), cap feeder, labeling machine (2004), shrink wrapper (2019), handle applicator (2002). Additional equipment includes mixer, palletizing, and conveyors. Technical Specifications & Performance Data Category: Complete Bottling Line Year: 2010 Condition: ready for operation Production speed:  ...

Technical Specifications & Performance Data Used SIAD Tempo Tehnika 350 Compressor (2004) engineered for reliable high-pressure air supply across beverage production and industrial packaging environments. This second hand unit supports pneumatic demands for filling, capping, labeling, rinsing, conveying, and PET stretch-blow molding within a used bottling line. Manufacturer: SIAD Model: Tempo Tehnika 350 Year: 2004 Drive Power: 75 kW Rated Pressure: 42 bar for high-pressure applications (e.g., PET blow molding) Rotational Speed: 1100 rpm Included Air Dryer: Bode DU 37 type 309 (2006) Compressor Cooler: MTA RWD 150 (2004) Compressed Air Receiver: 1,000 L Operational Status: Ready for operation Safety Features: Included; Manuals: available Air Delivery/Flow: data available on request Electrical: Three-phase industrial supply, 75 kW installed power Application Scope: Supports PET, glass, an ...

Used Compressor Siad 1999 Looking for a reliable compressor to meet your high-pressure needs? We have just the machine for you: a SIAD MS2/1242-B2 compressor, manufactured in 1999, with only 238 operating hours. This compressor is an excellent choice for those requiring powerful, dependable, and high-pressure-capable machinery. The SIAD is equipped with a single stage and delivers a pressure output of 50 bar, with a power output of 299.9 kW. It’s ideal for heavy-duty, high-pressure applications in a range of industrial processes. The compressor comes with built-in safety features, and manuals are provided for troubleshooting if required. This compressor is currently in storage and has been well-maintained. With dimensions of L: 5900 mm, W: 3000 mm, H: 2500 mm, it fits well in any industrial space. It is a versatile machine that can handle various applications, making it suitable for us ...

Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where th ...