137,153 used machines on RESALE, but how to find them? Machine Search
CINTEX SENTRY METAL DETECTOR - SPARES COMPLETE FRONT SCREEN MODULE CONSISTING OF METAL WORK, SCREEN AND MAIN BOARD BOXED UNUSED STOCK OTHER MACHINE SPARES AVAILABLE PLEASE DO NOT HESITATE TO ASK
Sullar Screw Compressor Volume Flow 6.29 cbm Operating hours 31690 Motor power 45kw
Pressure: 8 bar Motor: 160 kW Voltage: 400 Volt / 50 Hz Free air delivery: 27,9 m³/min Measurement (WxHxD): 2265 x 2005 x 1585 Weight: 3200 kg Compressed air connection: DN 80
Pressure: 7,5 bar Motor: 55 kW Voltage: 400 Volt / 50 Hz Free air delivery: 9,81 m³/min Measurement (WxHxD): 2100 x 1720 x 1200 Weight: 2030 kg Compressed air connection: 2 1/2
description: Here we offer a whole range of different Siemens Simatic S7 components. It is possible to buy the entire range, but it is also possible to buy parts from the pallets. After delivery / pickup, you have the right to return the purchase without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in serv ...
Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Kompressor von Gardner Denver, gereinigt und getestet. Compressor of Gardner Denver, cleaned and tested. Kompressor / Compressor Gardner Denver KLT 15 (03) Baujahr / Year 2007- SN. 2740657 Luftstrom / Capacity 15/18 m3/h S1 0,75/0,9 kW / 1400/1710 /min
Manufacturer: Alup, Type: Allegro 24, Year: 2003, Schraubenkompressor: yes, Operating hours: 39280, Running idle houres: 4909, Verdichtungsenddruck bar 1: 5 - 13, Hauptläuferdrehzahl U/min 1: 2700, Antriebsleistung kW 1: 24, Volumenstrom m³/min 1: 0,76 - 3,91, Year :2003
Manufacturer: Boge Kompressor einheit mit Trockner und Behälter, Type: S 20-2, Year: ca.2014, Control: Boge, Screw compressors: yes, Operating hours: 8850, Running idle houres: 2500, Volume flow m³/min: 2,24, Final sealing pressure bar 1: 10, Power input kW: 15, Compressed air boiler litres: 1000, Required space L x W x H mm: 15, FREE TEXT: inkl.Drucklufttrockner und 1000 Liter Kessel und Ölwasserabscheider und Feinstfilter, Year :ca.2014
Compressor from Becker with pressure vessel
Sell several CO2 compressors, in good working order. Make bid for the lot
A very clean and working vacuum compressor. 2m3 per hour, 0,85 bar. One faze 220 V. Can ship worldwide.
BELT-screw compressor with sound protection hood, control unit and heat recovery system.
Roller Compactor Faytec - CP 1000 Manufacturer: Faytec Type: CP 1000 Year of Make: 2022 Operating hours: < 500 hours Location: DE - 549399 Olfen The flagship of the CP series! High-end roller compactors with a throughput of up to 400 kg/h. Laboratory and test machine Exceptionally few operating hours. The machine was not operated in regular production and is in a very good, almost mint condition. Features and benefits of the Faytec CP1000: Designed for products with bulk densities up to 0.1g/cm3. High-performance roller feeding with two horizontal and two vertical dosing screws Hydraulically generated pressing force for precise control of the roll gap High-quality roller sealing with side plates Easily dismountable parts for quick cleaning Space-saving thanks to compact design Vacuum venting without additional parts Professional o ...
Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019 Features:
A compressed air compressor is offered. Max. operating pressure: 11.0bar. Rated power: 18.5kW. Motor speed: 2940rpm. Ambient temperature: 3°C / 45°C. Controller: KAESER SIGMA CONTROL. Equipped with oil-water separator. The cooler is defective. The compressor was regularly serviced. Inspection possible by prior arrangement.
Compressor, compressor two-stage type S6H-20.2Y, displacement 73 m3/h For blast freezers or deep freezes. Needed two pcs., checked in stock.
We offer Peri Trio formwork accessories, used Balancing latch TAR 85, 65% discount on new price for 68,08EUR net 405 x Balancing Bolt TAR 85 a 68,08EUR You are bidding on 1 piece Prices are excl. VAT and transport Subject to sale If you have any questions, please contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding, formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
power requirement: 37 + 55 kW Pressure power: 8 bar EXW 92536 Pfreimd - loaded free on truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compound system with 3 pcs. compressor Bitzer S6F-30.2Y with control box Wired for blast freezer or freezer. Displacement per compressor 101cbm/h Temperature range minus 40°C
ORLÍK ORL 15BX2/500 D Screw Compressor with 500 L Receiver & Refrigerated Dryer Manufacturer: ORLÍK-KOMPRESORY Model: ORL 15BX2/500 D Year: 2019 Equipment type: Rotary Screw Compressor / Compressed-Air Station Location: 91701 Trnava Industrial compressed-air station comprising an enclosed rotary screw compressor, 500 L horizontal compressed-air receiver and ORLÍK refrigerated compressed-air dryer. Equipped with electronic compressor controller, emergency stop, pressure gauge and associated air fittings. Technical specifications: Motor power: 15 kW Capacity: 123 m³/h Maximum pressure: 10 bar Electrical supply: 400 V, 3-phase, 50 Hz Compressor speed: 6,835 rpm Receiver capacity: 500 L Weight: Approx. 500 kg Refrigerated dryer: Manufacturer: ORLÍK Model: KSO 125AB Manufacturing date: 11/2018 Refrigerant: R134a Maximum compressed-air pressure: 14 bar ...
Frascold S 15 56 Y Compressor with ROEN EST Heat Exchanger Used refrigeration package comprising a Frascold semi-hermetic reciprocating compressor and a ROEN EST shell-and-tube heat exchanger, suitable for industrial cooling and refrigeration systems. Compressor manufacturer: Frascold Compressor model: S 15 56 Y Compressor serial number: 3D000224 Motor rating: 11 kW / 15 hp Electrical supply: 380–420 V, 3-phase, 50 Hz Maximum running current: Approximately 31 A Displacement: 56 m³/h at 50 Hz / 67.2 m³/h at 60 Hz Speed: 1,450 rpm at 50 Hz / 1,740 rpm at 60 Hz Maximum pressure: 30 bar discharge / 20.5 bar suction Heat exchanger manufacturer: ROEN EST Heat exchanger model: RX.168.1.700.4.DN40.1H.MAR Heat exchanger serial number: 21860 Heat exchanger year: 2018 Shell/tube design pressure: 35 / 10 bar Shell/tube test pressure: 50.1 / 14.3 bar The equ ...
Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drum crusher with hydraulic pusher Knife drum width: 800 mm Mouth 800 x 1200 mm Motor: 18,5 kW extraction connection diameter 200 mm
Pressure vessel compressed air max 16 bar With pressure relief valve Standing model Content: 1000 litres
Volume: 2000l Gas: air Max pressure: 10.7 bar Max temp: -15/55°C
Offered are two variable-speed rotary screw compressors Atlas Copco with integrated refrigerated air dryers. Motor power: 37kW, operating pressure: 4bar-12.75bar, max. air delivery at 7bar: 7.76m³/min, refrigerated air dryer: Type ID 96. Machine dimensions per compressor X/Y/Z: 1260mm/780mm/1590mm. Documentation available. Inspection possible by arrangement.
new
Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 13 bar Effective free air delivery: 690 L/min Receiver capacity: 270l / 16bar l / bar weight of the machine ca.: 199 kg. motor: 400V / 5,5KW V / KW range L-W-H: 1,7 x 0,6 x 1,27 mm It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used unchecked Auction-ID: A7-51143-38
feed pressure: 8 bar Effective free air delivery: 120/220 L/min Receiver capacity: 50l / 10bar l / bar weight of the machine ca.: 24 kg. Number of cylinders: 1 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 1,1 x 0,32 x 24 mm This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 125/85 L/min Receiver capacity: 24 / 8 l / bar weight of the machine ca.: 22,5 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 600 x 310 x 510 mm Exhibition machine This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Siemens SIMATIC & SCALANCE industrial automation components – OP77A – Ethernet switches – 6 pieces Specifications: Brand: Siemens Series: SIMATIC / SCALANCE Type: Industrial Automation, HMI & Network Components Number of main components: 6 pieces Suitable for industrial control and Ethernet networks Features: 1x Siemens SIMATIC Panel OP77A operator panel Article number: 6AV6641-0BA11-0AX1 Graphic LCD display with function, numeric and navigation keys Power supply: 24 V DC Communication: RS422/485 and MPI/PROFIBUS DP Including documentation and accessories as shown 1x Siemens SCALANCE X108PoE Article number: 6GK5108-0PA00-2AA3 Industrial Ethernet switch 8x RJ45 Ethernet port, of which PoE ports Power supply: 24 V DC 1x Siemens SCALANCE XC108 Article number: 6GK5108-0BA00-2AC2 Industrial Ethernet switch 8x RJ45 Ethernet port Power supply: 24 V D ...
feed pressure: 8 bar Effective free air delivery: 250/350 L/min Receiver capacity: 200l / 10bar l / bar weight of the machine ca.: 105 kg. Number of cylinders: 2 Stk. motor: 230V / 2,2KW V / KW range L-W-H: 1140 x 510 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Siemens / Modicon Industrial Automation Components – PROFIBUS / SINEC / SIWAREX / ACS – lot 2219 Specifications: Mixed lot with industrial PLC, network, bus, control and communication components from mainly Siemens, Modicon/AEG, Gould and ACS Control System. Features: 2x Siemens SIMATIC S5 IM318 interface module, 6ES5 318-8MB12 and 6ES5 318-8MB13, for ET200U / PROFIBUS-DP communication; the 8MB12 supports PROFIBUS-DP according to DP Standard. 2x Siemens PROFIBUS OLM Optical Link Module, for linking/expanding PROFIBUS networks via optical connection. 4x Siemens SINEC L2 RS485 Bus Terminal, 6GK1500-0AA00, 9.6 kbit/s–1.5 Mbit/s, with connection cable; approx. 50 x 138 x 53 mm each. 2x Siemens SINEC L1 / SIMATIC S5 BT777 Bus Terminal, 6ES5 777-1BC00. 2x Siemens BT777 Bus Terminal, new/packaged, 6ES5 777-1BC01. 1x Siemens SIWAREX P 100-U-Bus output, type 7MH4205-1AC01, ...
HORIZONTAL PLATE FREEZER CABINET, TUCAL MODEL: A.H. + COOLING COMPRESSOR IN NOISELESS CABINET, MODEL: UC Technical description: Serial number: 609 Power supply: 400 V, 3 Ph, 50 Hz Pressure: 7/10 bar Temperature: -35 / +35 °C Refrigerant: NH3 Dimensions: 3000 x 1300 x 2300 mm Cooling compressor in noiseless cabinet, model: UC Serial number: 304 Year: 10/2015 Bitzer cooling compressor, type: OSNA8571-k Serial number: 1088702179 Dimensions of noiseless cabinet: 3000 x 1500 x 2320 mm
Complete laboratory equipment with work island, workbenches, sinks, boilers and Argon connections Specifications: Product Type: Complete Laboratory Equipment / Laboratory Work Furniture Location: first floor Central laboratory island: approx. 3,400 x 1,500 x 985 mm (L x W x H) Laboratory workbench / desk: approx. 4,500 x 880 x 770 mm (L x W x H) Laboratory workbench / desk: approx. 6,010 x 880 x 770 mm (L x W x H) Laboratory workbench / desk: approx. 4,480 x 880 x 770 mm (L x W x H) Number of sinks: 4 Number of Argon Couplings: 13 Features: 1x central laboratory island Various laboratory workbenches / desks 4 sinks Cranes Water heaters 13x Argon coupling Various laboratory connections Pressure regulators with pressure gauges Surface-mounted unit with various connection points Various electrical connections / wall sockets Worksheets Base cabinets Drawer units ...
Two stage compressor Bitzer S4N-8,2Y +ECO + K203H. Comperssor is working and in very good condition. Just need to connect the economizer and condenser.
VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads | weighing range (single dump): 10-1500g | volume per weighing head: 1.6L | weighing accuracy: X(0.5) | discharge flap: single flap | surface finshing: plain surface (optional for surcharge dimpled surfa ...
# Industrial Air Compressor Atlas Copco GA 250 FF – Full Feature Overview Industrial compressed-air compressor manufactured by Atlas Copco, model GA 250 FF (Full Feature), offered as a standalone industrial unit. The equipment features a complete enclosed casing, integrated electrical and control systems, and ventilation and extraction ducts associated with the installation. The compressor is designed for industrial compressed-air applications and is suitable for facilities requiring a dedicated air compression unit, subject to verification of its technical specifications and suitability for the intended application. According to the available listing information, the compressor is practically unused and in very good overall condition. The equipment is offered installed in its current location in Vícar, Almería, Spain, together with the components and accessories func ...
VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads | weighing range (single dump): 10-1500g | volume per weighing head: 1.6L | weighing accuracy: X(0.5) | discharge flap: single flap | surface finshing: plain surface (optional for surcharge dimpled surface) ...
VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads | weighing range (single dump): 2~200g | volume per weighing head: 0.5L | weighing accuracy: X(0.5) | discharge flap: single flap | surface finshing: plain surface (optional for surcharge dimpled surface ...
maximum number of results exceeded
please refine your search
500 € 
