combined used for sale

: neu : 9403 : 180 € : 1 : 1/4, 3/8, 1/2 mm : 4 kg operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending diam. - max.: 36,0 mm ST cutting thickness max.: 36,0 mm ST motor: 1450 U/min oil volume: 32,0 l motor: 380 Volt 50 Hz total power requirement: 5,5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Furnishing : - Maximum performance, minimum consumption - hydraulic combined machine for bending and cutting operations for e.g. structural steel or solid material - Bending mode with 3x different angle settings - Manual and automatic mode selectable - simultaneous bending and cutting operations When the machine is running, - - ECO mode = hydraulic pump only runs when the foot switch is actuated - free-moving footswitch - Operation manual Technical specifications : - Steel 45 kg / mm² .. Bend Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bend Ø 20.0 mm / cutting Ø 24.0 mm - Steel 65 kg / mm² .. bend Ø 32.0 mm / cutting Ø 32.0 mm for 2x pieces - steel ...

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

JUNGHEINRICH TFG 42 forklift built in Germany in 2007, is designed for the fast transport of goods inside and outside warehouses. A deformation-resistant frame characterised by maximum stability, combined with a powerful engine, makes the forklift capable of tackling even the most demanding challenges in all conditions. The machine’s operator’s position, with its adjustable, comfortable seat, provides a high level of driving comfort and excellent all-round visibility. For easy entry and exit from the vehicle, the position is equipped with non-slip handles and steps. The JUNGHEINRICH gas forklift is powered by a four-cylinder engine with liquid gas spark ignition. The engine is protected by two side covers and a wide-opening hatch, which significantly facilitates maintenance operations. To guarantee maximum operational safety, the gas cylinder is mounted in a special holder on the  ...

Technical data/equipment: - Working width 1350 mm, grinding from above, with 2 grinding units: Contact roller unit 15 kW with calibration device and height-adjustable contact roller 65° Shore Combined contact roller pressure shoe unit, drive power 11 kW, with higher adjustable contact roller 85° Shore and through the workpiece electr.pneum. controlled air cushion pressure shoe - Sanding belt dimensions W x L 1360 x 1,900 mm - Cleaning brush in the spout - Belt feed device, speed 3-15 m/min - Roller table in the inlet - Display of workpiece thickness - Air requirement machine control 60 NL/min - Suction nozzle Ø 3 x 200 mm - Extraction capacity 7,600 - 8,200 m³/h, Machine resistance 800 Pa - Total connection value 28 kW (380 V, 50 Hz) - autom. Star-triangle start-up - Braking device - pneum. Strip tension - optical airless belt control - pneum. spring-loaded centre ...

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 63 t

EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW

Combined belt grinding and polishing machine make METABO type 72780 SLFabr. -No: 75 8825Technical specifications:Construction height up to spindle height: 630 mmSpindle speeds: 700 x 2800 rpm.External dimensions approx .: 1677 x 680 x 900 mmwith- 1 belt sanding arm- 2 motorsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

5-way combined profile steel shears make PEDDINGHAUS type 210 Super 13Machine -No: 580AC015 built in 1979Technical specifications:Flat steel: 200 x 13 mmL-steel: 120 x 13 mmU-steel: 180 mmRound steel: 45 mmSquare steel: 40 mmPunching force: 65 tholes: 27 in 19 mmor: 90 in 5.5 mmStroke: 25.5 mmProjection: 370 mmWeight approx: 2100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

IMA CARTONING MACHINE, MODEL FLEXA CSD Year of construction: 2009 Flexa is a high performing, reliable, efficient and modular cartoner. It offers product handling combined with fast changeovers, ensured by advanced computer-controlled technology. Offers the best ergonomics for access, changeover, cleaning and trouble shooting. It can handle the cartoning of bottles (both plastic and glass), cosmetics, jars, inhalers, ampoules, vials and syringes etc. Equipped with GUK leaflet folder. TECHNICAL DATA: Net weight: approx. Kg 1580 Length: mm 3650 Width: mm 1750 Height: mm 2000 Frequency: 50 Hz Voltage: 400 volts Current: A 23 Pressure: bar 6 Production characteristics: Production speed: 140 cartons/min Carton width: 26-50 mm Carton height: 26-50 mm Carton length: 93-120 mm Compressed air consumption: 134 NI/min Installed power: 5 Kw The cartoning cycle is complet ...

Combined lever shears make PEDDINGHAUS type 5 RP 10Machine -No: 992815Technical specifications:Blade length: 175mmPerformance sheet steel up to: 10 mmPower angle iron: 80 x 8 mmPerformance bar steel shears round: 22 mmPower bar steel shears square: 20 mmPerformance profile steel shears: 60 x 7 mmDimensions approx.: 700 x 200 x 700 mmApprox. weight: 107 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined welding machine make TECNA type T-SPOT 120with 2-fold spot welding function, Art. -No: 3541Machine -No: 00238, built in 2015Power at 50% ED: 5 KVAmaximum direct current: 2.6 KAHeat flow: 8.3VNo-load secondary voltage: 8.3VFuse: 16 AExternal dimensions: 345 x 220 x 420 mmWeight: 28 kgWith- Multifunction gun- Ground cable- electrodes- CE marking- for spot weldingvery little used from body shopin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

IMA CARTONING MACHINE, MODEL K150C Year of manufacture: 1995 (overhaul: 2011) K150 is an accessible, reliable and efficient cartoner ensuring quiet running at high speed. Its carton prebreaking and opening system combined to extrapositive carton handling by multiple belts ensures best carton forming control. Its design allows fast access and easy cleaning. The machine is equipped with a feeding system for bottles, a feeding system for vials, a GUK Cartonac 81 FA21/ 4 leaflet feeder, IncJet printing and control unit, Antares Vision print control system. TECHNICAL DATA Frequency: 50 Hz Voltage: 380 volts Power: Kw 4,5 Weight: Kg 1500 Production characteristics: Min carton dimensions: mm 20 x 12 x 50 Max carton dimensions: mm 85 x 60 x 190 Max production: 150 cartons/min Pressure: 6 ATM The K150 can handle a wide range of product feeding groups (bottles, squeezable  ...

Used bread roll system KÖNIG, Type: Laurin 1000 / Futura -In bakery condition- Versatile for round rolls or Berliners, shaped pastries, such as Kaiser and long rolled products. Wound products, such as salt sticks, croissants or Kornspitz with additional winding unit possible. - 2-row head machine Futura with active drum SKG51 and AKG70 - Cross input tape - Fermentation chamber and forming station Laurin 1000 - Mehler - Punching - Tool unit - Punch flourer - Settling device for automatic settling on sheet metal - Sheet metal input for 2 sheets - Sheet metal output for 2 sheets - Control switch - Display Universal, versatile small pastry system for round, spotted, long-rolled and sliced (pressed) dough pieces. Can also be combined with a winder via the side discharge. The facility is in good condition. Viewing and test run are possible by arrangement. Overhaul poss ...

STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...

5-fold combined dressing and thicknessing machine, circular saw, milling machine and Slotted Hole Drilling Machine Frommia Type 261 UB Dressing, joining and thicknessing planers Planing width approx. 410 mm Planing thickness approx. 1- 185 mm Dressing table length approx. 1550 mm Thickness table length approx. 700 mm Knife shaft diameter 100 mm with 2 knives Speed of the knife shaft approx. 5200 rpm. 4 feed speeds approx. 5, 9, 12, 18 m/min. Motor approx. 4 kW Drill Drilling depth approx. 120 mm Slot length approx. 200 mm Height adjustment approx. 80 mm Table size approx. 180 x 320 mm Circular saw and milling combination Table size approx. 800 x 600 mm Diameter of saw blades 150 – 300 mm Max. cutting height approx. 95 mm Diameter of the saw shaft at the clamping part 20 mm Speed of the circular saw shaft approx. 3600 rpm. Motor power approx. 1.5 or 2.2 kW  ...

Used pallet rack - approx. 3.500 x 14.100 x 1.100 mm - heavy duty rack shelf Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as almost ...

Used pallet rack - approx. 4.500 x 11.300 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

Used pallet rack - approx. 4,500 x 11,300 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well a ...

Used pallet rack - approx. 4,500 x 11,300 x 1,100 mm - heavy duty rack shelf 1.5 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well  ...

Complete MTU E3042Z6 Combined Heat and Power Natural Gas Generating Set CHP With Acoustic Canopy. Ready to run, turnkey low-hour CHP generating set with acoustic canopy. New exchange block was installed 10,000 hours ago (total hours for set 30,000). Engine is in great condition and available for immediate delivery. Make and Model: MTU E3042Z6 Hours: 10,000 Year: 2017 Capacity: Electric Power 390 kW Thermal Power 490 kW Heating water inlet / outlet 70 / 90 C Fuel: Natural Gas Voltage: 400 HZ: 50 Scope of supply: Engine, Alternator (Leroy Somer), Base Frame, Control Panel, Gas line, Piping, Pumps, Exhaust, Intercooler, Cabling from control panel to alternator, Acoustic Canopy, Documentation.

Used pallet rack - approx. 5,000 x 22,500 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Used pallet rack - approx. 5,000 x 19,700 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Convotherm OES 10.10 combi steamer electric - with base - Disappearing door - door disappears to the side of the damper when opened 10 bays GN 1/1 Functions: Steam, Combi Steam, Hot Air Crisp&Tasty USB interface integrated in the control panel Standard equipment Steam (30-130°C) with guaranteed steam saturation Combined steam (30-250°C) with automatic Humidity adaptation Hot air (30-250°C) with optimized Heat transfer easyDial control panel Digital Display Regeneration Function ProductsRegenerate 99 cooking profiles, each with up to 9 steps Multi-point core temperature sensor Door handle with safety lock, preheating and cool-down function Metrics: Height with base: 182cm x Width:94cm Door pushed to the side: 103cm x Depth:82cm + 8cm handle Device is fully functional Contacts for personal arrangements: Mr. Avanesyan +49 176 56358605, Mr. Oswald +49 176  ...

Used pallet rack - approx. 5,000 x 16,900 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Used pallet rack - approx. 5,000 x 14,100 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

Used pallet rack - approx. 5,000 x 11,300 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Used pallet rack - approx. 5,000 x 22,500 x 1,100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as  ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Used pallet rack - approx. 5.000 x 19.700 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as  ...

Used pallet rack - approx. 5.000 x 16.900 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as  ...

VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2

Used pallet rack - approx. 5.000 x 14.100 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the included locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as  ...

Used pallet rack - approx. 4,000 x 22,500 x 1,100 mm - heavy duty rack shelf 1.5 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well  ...

High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding cartons, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Character height from 1.5 to 18 mm Product benefits at a glance High-resolution inkjet printing: 128 individually addressable dots per printhead. Completely free print image design within the text area. Combination of text, logos and barcodes in one printed image. Kortho Image Generating Software for logical image creation on the pc. Unique infrared remote control: no wired connection required. Separate, refillable ink tank with industrial-grade volume. Clean, easy filling with ink during operation. Very low cost per print. Printing costs can be calculated by program. Maintenance reduced to a minimum. No need to rinse with solvent. The advanta ...

Used pallet rack - approx. 4,000 x 19,700 x 1,100 mm - heavy duty rack rack 1.5 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well a ...

Used pallet rack - approx. 4,000 x 16,900 x 1,100 mm - heavy duty rack shelf 1.5 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well  ...

Used pallet rack - approx. 4,000 x 11,300 x 1,100 mm - heavy duty rack shelf 1.5 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well  ...

Used pallet rack - approx. 4.000 x 14.100 x 1.100 mm - heavy duty rack shelf 1,5tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well a ...

Used pallet rack - approx. 4.000 x 22.500 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Used pallet rack - approx. 4,000 x 22,500 x 1,100 mm - heavy duty rack shelf 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well  ...

Used pallet rack - approx. 4.000 x 19.700 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Used pallet rack - approx. 4,000 x 19,700 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well a ...

Used pallet rack - approx. 4.000 x 16.900 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...