combine used for sale

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

2006 combination folding unit with 6 buckles 2 folding knives pallet feeder FP 120 Navigator Control noise absorbing hood in production available: immediately location: Germany

Key data: 2500 KW, 10500 V

FOR SALE: Caterpillar G3520H Gas Generator Set (2013) Zero Hours Since Major Overhaul | 2,500 kW Continuous Power Output Maximize operational efficiency and reliability with this prime power, high-capacity industrial generator. This natural gas-powered genset delivers continuous-duty performance and is ideally suited for mission-critical infrastructure, distributed energy systems, and onsite power generation. Technical Specifications: Engine Model: Caterpillar G3520H Generator Set S/N: GFP00117 Manufacture Year: 2013 Power Rating: 2,500 kW / 3,125 kVA (Base Load / Baseload Applications) Fuel Type: Natural Gas Rated Voltage: 10,500 V Frequency: 50 Hz Power Factor: 0.8 (Lagging) RPM: 1500 Rated Current: 172 A Phase Configuration: 3-Phase Connection Type: Wye (Star) Insulation Class: F Excitation Voltage / Current: 50 V / 4.3 A Cooling Sy ...

Key data: 3600 KW, 4600 kVA, 6600 V

We offer a MWM CHP Type: TBG 632 V16 for sale Specifications: Engine: MWM Type: TBG 632 V16 Power: 3600 kW Generator: AVK Power: 4600 KVA Voltage: 6600 V Running hours: 47,000 h Weight: 46,000 kg Scope of delivery: motor plus generator on base frame

A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabin ...

Key data: 163 KW, 200 kVA

We currently offer: Generator set Aggreko Model No.: QSB7-G6 Engine Cummins Generator Stamford Power: 200 KVA / 163 KW Hz 50 RPM 1500 Year of construction 2012 Hours: 14589 Metrics: L: 4.15m H: 2.50m W: 1.15m Weight: 4887 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 504 KW, 630 kVA

We currently offer: GenSet generator set Type: V630GX Engine Volvo Type: TWD 1643 GE Generator Marelli Type: MJB 355 MA4 Power: 630 KVA / 504 KW Generator 680 KVA IP 23 Hz 50 Year of construction 2009 Hours: 7307 Metrics L: 4.65m H: 2.45m B: 1.85m Weight: Empty: 6580 kg / Loaded: 7397 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Inv. Num. : 8405 Type: Peddimax No 1 Producer: Peddinghaus Created: 2019 Parameters: Operating hours: 150 h Strength: 140 t Pressure: 300 bar Equipment: Flaps

MORGANA Digifold Pro By combining creases and folds in a single unit, a highly productive and user-friendly mobile finishing center is created. Perforation is also possible, which optimally rounds off the range of applications. With a speed of up to 6,000 sheets per hour and a maximum format of up to 900 x 358mm, the new Digifold Pro is even more flexible in use. A large touch-screen display makes it easy to operate the Digifold Pro, as well as all other machines from the Pro generation. Versatility The Digifold Pro can be used in three different ways, depending on your needs: As a creasing machine As a folding machine As an integrated creasing and folding machine that performs both functions in a single operation. Feeder: Suction feeder pulls paper from below Paper size: max. 900 x 358 mm // Paper size min. 210 x 140 mm Paper weight max. 400 g/m² // Paper weight min.  ...

Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A

Key data: 48 KW, 60 kVA

Number 007 Generator sets Type: K0363 Engine Iveco Generator LeRoy Somer Power: 60 KVA / 48 KW Hz 50 RPM 1500 IP 21 AVR controller RS 437 Year of manufacture 1989 Hours 237 Accessories: Control cabinet Metrics: L: 2.25m H: 1.50m B: 0.70m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Combined copying milling machine - lathe MICHÄL KÄMPF

Key data: 1094 KW, 1445 kVA, 400 V

Jenbacher Gas CHP C320 GS-B Bio-gas electricity and heat generator from 2006 with 63,868 operating hours, Container with control, exhaust gas heat exchanger, exhaust silencer and cooling. 1 available 1,064 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford A06H625192, 1,445 KVA Manufacturer: Jenbacher Model: C320 GS-B Type: Bio-Gas CHP Container Serial number: 0204758/002 Power [KWel]: 1,064 Engine: J 320 GS Serial Number: 1237603 Engine power [KW]: 1,094 Year of Make: 2006 Hours: 63,868 Weight gene set [kg]: 11,000 Weight container [kg]: 25,000 Dimensions LxWxH [cm]: 1,220 x 250 x 285 AC Generator Stamford A06H625192 Manufacturer: Stamford Model No.: A06H625192 Type: AC Synchronous Generator Serial number: 0204758/002 Power [KVA]: 1,445 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2,237 Speed [1/min]: 1,500 Year of Make: 2006 Hours: 63,868 Weigh ...

Machine name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56kW Dimensions: L 3,600 x W 950 x H 1,750 mm Curb weight: 2,200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Machine name: Combined heat and power plant used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Curb weight: 2200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Key data: 305 KW, 380 kVA

We currently offer: Number 71 John Deere generator set Magnaplus Generator Power 380 KVA / 305 KW RPM 1500 Hz 50 Hours: 7033 Year of manufacture 2004 Metrics: L: 3.75m H: 2.60m W: 1.35m Weight: 5 tons The engine of the generator turns, but does not start. You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 999 KW, 999 kVA, 999 V

Dear Ladies and Gentlemen, We hereby offer the following refurbished MAN replacement gas engines of the E08xx, E28xx or E32xx series. Description: • Refurbished gas engine, refurbished according to recognised quality standards • Complete engine, ready to use • Multi-cylinder V-shaped or in-line engine with water-cooled system • Water-cooled exhaust gas routing Engine versions and power ranges MAN E0834 > 60kW MAN E0836 > 75-100kW MAN E2876 > 190-210kW MAN E2848 > 250-270kW MAN E2842 > 360-400kW MAN E3268 > 350kW MAN E3262 > 530kW Repairs: • Engine block carefully checked, processed and cleaned (incl. sealing surfaces, bearing points and oil channels) • Crankshaft and camshaft checked to standard dimensions, machined and replaced if necessary • Cylinder heads as replacement components, tested and overhauled (incl. valve guides and seat rings) • Conne ...

Key data: 48 KW, 60 kVA

We currently offer: No. 008 Atlas Copco generator set Type: QAS60 Engine Perkins 3910/1500 Power 60 KVA / 48 KW Generator LeRoy Somer Hz 50 RPM 1500 IP 23 AVR control R250 Year of construction 2013 dB 87 Connection: 16A, 32A, 63A, socket Operating hours 19532 Metrics L: 2.80m W: 1.15m H: 1.75m Weight: 2130 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 118 KW, 200 kVA, 400 V

Sokratherm Gas CHP GG 110iSI – MAN E2866 E301 Gas electricity and heat generator from 1998, with 21,019 operating hours, with control. 1 available 110 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Marelli Motori M7B 250 MC 4, 200 KVA Manufacturer: Sokratherm Model: GG 110iSI Type: Gas CHP Serial Number: 808259 Engine: MAN E2866 E301 – 118 KW Electrical power [KWel]: 110 Thermal power [KWth]: 200 Gas capacity [KWgas]: 344 Year of Make: 1998 Hours: 21,019 Weight unit [kg]: 3,320 Dimensions LxWxH [m]: 2.80 x 0.90 x 2.20 AC Generator Marelli Motori M7B 250 MC 4 Manufacturer: Marelli Motori Model: M7B 250 MC 4 Type: AC Synchronous Generator Serial Number: MD-1990 Power [KVA]: 200 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 289 Speed [1/min]: 1,500 Year of Make: 1998

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault desp ...

Key data: 250 KW

MAN gas engine is available with very low hours. Type: E2842E312 Scope of supply: CHP Gas line Control Panel Exhaust gas cooler Enclosed silenced container

Key data: 264 KW, 450 kVA, 400 V

Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994

Combination machine FELDER BF6-26 -used-circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, self-adjusting knife shaft---------- Technical data ----------planing width: 260 mm, number of knives: 2 pieces, planing shaft Ã: 86 mm, passage height: 220 mm, dressing table length: 1300 mm, cutting width: 780 mm, swivel range circular saw: 0- 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 0-45 Â, useful length milling spindle: 120 mm, max. cutter diameter: 220 mm, max.

Key data: 2000 KW, 2500 kVA, 400 V

2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.

Horizon AFC-544 AKT, Year 2006 Flatfeeder 4 pockets 1 knife 2 side pockets delivery LCV-54 Etc. Available: at short term

Key data: 664 KW, 830 kVA, 400 V

Running hours 60,000

Key data: 75 KW, 112 kVA, 400 V

Buderus Gas CHP EN 70 MAN E0836 E302 Gas electricity and heat generator from 2014 with 81,648 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Gas CHP Engine: MAN E0836 E302 Serial Number: 100006776 Power [KW]: 75 Year of Make: 2014 Hours: 81,648 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 30692/5 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 440

Key data: 150 KW, 220 kVA, 400 V

Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010

FOLDER STAHL T 56/4FB2 -Year 1987 -High pile feeder -Four buckles Min./max. size 150x210 mms / 560x840 mms -Air pump, Delivery -All rollers in nice conditions -Available immediately

Key data: 70 KW, 63 kVA, 400 V

HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315

Key data: 2000 KW, 2500 kVA, 10500 V

2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Key data: 20 KW, 400 V

Vaillant Gas Generator (CHP) Eco Power 20.0 Gas electricity and heat generators from 2016 with 52,214 operating hours, closed unit. 20 KWel x 1,540 rpm, 400 V/50 Hz. CHP Vaillant Eco Power 20.0 Manufacturer: Vaillant Model: Eco Power 20.0 Type: Gas CHP Serial Number: 21161100100186070936000041N6 Power [KWel]: 10 – 20 Power (50/30°C) [KWth]: 29 – 44 Year of Make: 2016 Hours: 52,214 Weight unit [kg]: 867 Dimensions LxWxH [m]: 1.90 x 1.05 x 2.00

Key data: 20 KW, 400 V

Remeha Gas Generator ELW 20-43 Gas electricity and heat generator from 2014 with 51,151 operating hours. Closed unit with control. 20 KWel x 1,527 rpm, 400 V/50 Hz. Model No.: ELW 20-43 R0048 Type: Gas Electricity and Heat Generator Serial number: SK0714A-ETWD-020136 AC generator (asynchronous): Weier DASGM 225/45 AC Generator Speed [1/min] 1,527 Engine: Toyota Power [KWel]: 10-20 Power [KWth]: 29-46 Voltage [V]: 400 Current [A]: 37.5 Frequency [Hz]: 50 Year of Make: 2014 Hours: 51,151 Weight unit [kg]: 880 Dimensions LxWxH [cm]: 165 x 105 x 200

2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages

Combi-machine, sheet metal roller, bending and cutting>br>bending max. 1 mm.>br>rollers max. 1 mm.>br>cutting max. 1 mm.>br>width of segments 25 - 50 - 75 - 75 - 105 mm.>br>Maximum working width 305 mm.>br>diameter of rollers 38 mm.>br>Maximum bending angle 90 degrees. >br>condition: never used / new (5) Auction-ID: A7-44817-113

Section steel shears combined:>br>- foot switch>br>- length stop>br>round steel 30 mm>br>square steel 28 mm>br>angle steel 90 x 8 mm>br>flat bar 150 x 8 mm>br>pressure capacity 35 t>br>total power requirement 2.8 kW>br>machine weight approx. 0.5 t>br> space requirement approx. 0.75 x 1.0 x 1.5 m >br>condition: untested (6) Auction-ID: A7-44817-47

FH310958 – 10 pcs, HXE52950 – 14 pcs, Z81874 – 24 pcs, FH310958 – 40 pcs, and Z81123 – 6 pcs. Auction-ID: A7-44806-12

https://www.audio-technica.com/en-us/m3-system Sold with the following accessories incl. antenna set: 4x M3T-H1, IEM transmitter (754-787MHz) 4x M3R-H1, IEM receiver (754-787MHz) 1x MCB4, 4-way antenna combiner 4x EP3 Earphones for M3-H1 IEM 4x Coxial Power Connector Link-Cable 4x BNC Link-Cable 1x Power Supply for MCB4 Combiner 4x power supply for M3T-H1 transmitter 4x stub antenna 1x ATW-A49 Active Directional Antenna (400-900MHz) 1x BNC cable 3m Auction-ID: A7-45172-48

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink  ...

Key data: 54 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-50/81 Gas-electricity and heat generators from 2009, 44,938 operating hours, closed module. 50 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-50/81 Type: Gas CHP Power [KWel]: 50 Serial Number: 700 02 0050-0013-0753 Engine: MAN E0834 E302 Engine power [KW]: 54 Year of Make: 2009 Hours: 44,938 Weight [kg]: 2,400 Dimensions LxWxH [m]: 3.20 x 0.90 x 1.80 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 234173/5 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2009

Buderus combined heat and power plant EN20 Bosch KWK System GmbH Lollar CHP module / chip modules Engine VW 2.0L CBS Natural Gas Power output 19 KW Generator KOEZIE 225/4 Thermal power 34 KW with 1000 litre tank hot water Stainless steel chimney etc Available now! Tel. 01715213204