combination machine used for sale

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rose Forgrove (APV) Type: RF 555 Flowpak YOM: 1988 output: up to 200 pieces/min. electrical: 380 V; 3 ph; 50 Hz dimensions: 4000 x 1250 x 1700 (lxwxh) Format range: length 50 - 275mm width max. 175 mm high max. 50mm discharge length: 315 mm Roll width: 450 mm Max. Rollen - ?: 330 mm (Außen), 76 mm (Innen) different: Infeed ca. 2000mm We offer this machine in as-is where-is condition excluded Vat, ex Warehouse Hess. Lichtenau, unpacked

Siemens Uroskop Access in gutem technischen und optischen Zustand Baujahr 2005 alle technischen Unterlagen und viel Zubehör

Kneader UC 80 AL with an extendable tray. Basic refurbished dough quantity: approx. 130 kg

Type: 751 carton sealing machine top Type: 651 carton sealing machine below Machine is to the close of folding cartons with tape (top/bottom).

Castle admission machine Drilling group, Kettenstemmer, Stulpfraese with turret stop for doors in left-right execution. L x W x H: 100 cm x 60 cm x 220 cm Built in 1982 Weight approx. 400 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

1-Clamp Automated Perfect Binder, Format: Sheet Size: Max. 320x320mm, Min. 148x105, Format: Cover Size: Max. 660x320mm, Min. 230x135mm, Book Thickness: 1 to 50mm, Cover Weight Range: 80-300 g/m², Cover Pile Height: Max. 70mm, Max. Production Speed: 500 Cycles/Hour (About 300-400 Books/Hour), Color Touchscreen Control Display Panel, 200 Memories For Repeat Orders Saveable Jobs, Double And Miss Detection, 1 Carriage Clamp Automatically Adjusted To The Input Book Thickness, Automatic Book Thickness Caliper, Milling And Roughening Station, Adjustable Milling Depth From 0mm To 3mm, Glue Tank With Dual Application Rollers And Side Gluing Roller (Adjustable Amount Of Glue And Glue Lenght Through The Color Touchscreen, Spine Gluing, Side Gluing, Nipping Station, Suction Drum Cover Feeder, 4x Cover Scoring/Creasing, PUR Gluing System SM Klebetechnik, Type: AN 533604, AGE: 2009, Serial No. 090838 ...

Material: Stainless steel 1.4301 Drive: 5.5 KW Weight: 2050 kg Area per deck: 3.65 m² 2 x ball tap cleaning 2 x sieve with mesh size choice: 0.1-5 mm.

SOS block bottom bag machine 1 ply photo cell for preprinted paper 4 colour tail end printer Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

ID3265 Adler B50 year/Year of construction 2020 approx. 1500 hours/ hours 3.1 t Well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5 t, standpipe with auger for pre-drilling, 110 m flushing drill pipe on steel pallet, complete maintenance was carried out at the end of 23. The machine was fitted with a new drill head from Eurodrill at the end of 2013 for approx. 20,000 euros. Water well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5t, standpipe with auger for pre-drilling, 110 m directional drill pipe on steel pallet, complete maintenance was carried out at the end of 23. At the end of 23, the machine received a new drill head from Eurodrill for about 20,000 euros.

SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm

SOS Block bottom bag machine 2 plies photo cell for preprinted paper 4 colour tail end printer bottom patch and 1 colour tail end printer for bottom patch Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock

Key data: 530 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

Technical data: -Material thickness 1.25 mm -maximum throat depth 180 mm -Roller Center distance 63 mm -maximum thickness at 40 kg / mm² strength 1.25 mm -Working speed approx. 6 + 12 m / min -Drive: 400 V / 0.7 / 0,85 kW - space requirement approx. B 550 x H 1250 X 1000 mm -Weight approx. 120 kg -with: - E - foot switch

Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...

Dimensions and weights Length approx. 2200 mm Width/depth approx. 1330 mm Height approx. 1300 mm Weight approx. 362 kg Dressing Dressing table width 260 mm Dressing table length 1120 mm Chip removal max. 4 mm Suction connection Extraction nozzle diameter milling machine 100 mm Suction nozzle diameter saw blade guard 30 mm Suction nozzle diameter thickness 100 mm Thickness Table length 545 mm Table width 258 mm Working height min. 5 mm Working height max. 225 mm Chip removal max. 4 mm Electrical Data Saw input power 2.2 kW Input power planer 2.2 kW Input power table milling machine 1.5 kW Connection voltage 230 V Mains frequency 50 Hz Milling spindle Mandrel diameter 30 mm Effective length 105 mm Height adjustment 110 mm Speed(s) 1400/4000/6000/9000 rpm(s) Milling tool diameter max. non-lowerable 160 mm Noise emission Sound pressure level no-load 80 dB(A)  ...

Poly Clip FCA 3430-18

Technical data: -5 x good plate surface, 2 x good plate with hole -Mounting plate - length approx. 1485 mm -Width approx. 990 mm -Plate thickness 50 mm -Plate thickness with ribbing 115 mm -Height adjustable in height approx. 880 mm - plate frame -4 T - longitudinal grooves L 1485 mm -Distance between the grooves 250 mm -Sliding distance from outer edge 120 mm -Keyway width approx. 17 / 38 mm -Groove depth approx. 40 mm -Weight approx. 950 kg -Space requirement approx. L T 1485 x 990 x H 880 mm

Rollers loyal for three-point hitch. Splitt-, salt and sand spreaders, content 200 ltr. (with optional essay 280 ltr. possible), spread width 100 cm. Foldable litter floors and shutters made of V2A stainless steel, scattered wave with wear-resistant plastic elements, container cover with hinged bar. Min. for hydraulic drive with flow 12 / MAX 25 ltr. / min. Almost like new condition.

Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary  ...

Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg

to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm

Fully automatic food sealer The machine can thermo-weld appropriate portion of film over tubs containing convenience and pre-cooked food (solid, liquid, creamy, pasty), generic foodstuff and non-food items too. The film is accurately sealed and cut along the whole extent of the tub’s outline.

Wet belt grinding machine EDERTAL BSM 200 The Edertal wet belt sander is ideally suited for sharpening knives, hatchets, cutter knives, axes, etc. The wet grinding ensures a long service life of the cutting edges, as annealing of the blades is hardly possible. In addition, the permanent water cooling achieves an optimal and permanent sharpening result. The BSM 200 grinding machine is a compact, robust and high-quality grinding machine that is made entirely of stainless steel. The sanding belt attached to the right side is tensioned and aligned by a stable clamping device. On the left-hand felt disc, in combination with a polishing paste, the ground tools can be tightened and deburred. The design and the material used comply with the hygienic and occupational health and safety requirements as well as the EC directives. Specifications: Power supply: 230 V Input power: 3 ...

Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg

GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1997. The machine, designed for precision machining of workpieces with a maximum diameter of 500 mm, has two spindles (main spindle and sub-spindle) of high speed and power, which will improve even the most intensive machining. The installed GRUNDING CNC controller with colour screen and control panel also allows for cycles to control. The total weight of the machine is approximately 3000 kg. Technical specifications of the GILDEMEISTER NEF Plus 500 lathe - CNC control: GRUNDIG - maximum turning diameter (over bed): 500 mm - maximum turning diameter (over saddle): 290 mm - maximum turning length: 1500 mm - main spindle rotational speed range: 80-2800 rpm - main spindle passage: 70 mm - main spindle drive power: 11 kW - maximum sub-spindle rotational speed: 5000 rpm - sub-spindle drive power: 7.5 kW - total power require ...

Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69

Capping machine for Tetra Pak line year: 2008

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg

Used semi-automatic PackService cartoner model PS300 Functional Description This semi-automatic machine has been designed to fill pre-formed cases that are loaded manually onto the hopper. The hopper is set at a height that can vary between 800 and 920mm and the cartons are moved into the stacking area by means of a conveyor belt. Depending on the size of the cases and cartons that the machine packs, a pre-stacking station can be added to the stacking zone. This permits the automatic feedbacking of cartons yet to be stacked during the transfer phases of the cartons to the hopper or to the cases. The case is held on the hopper by means of the carriage; Once the case has been filled the carriage moves the case down and onto the outfeed idle roller Construction: º Frame in painted steel. º Casings with frame in anodized steel with openable panels in transparent methacrylate wi ...

Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 900 mm -Weight approx. 420 kg -with:-coolant system -Keyless drill Chuck 1-13 - lighting

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Bandwidth of 50-500 mm Band thickness 0.8 3.6 mm Belt speed 5-40 m / min Feed rollers 2 PCs Richwalzen (80 mm) - 11 PCs Working direction optional

KOLZER DGK36″ PVD sputtering machine was built in 2017. This specially constructed machine is used in the vacuum coating process, after which the workpieces are characterised by a metallic effect” with high resistance to abrasion and chemical agents, as well as innovative colours. The PVD sputtering process involves the expulsion of metal atoms from a target (evaporation material) placed in the working chamber, which are then transferred and deposited onto the surface of the workpieces. In this operation, the target is exposed to a technological vacuum, consisting of process gas and high voltage. At the end, the workpiece surfaces are cleaned and activated by the plasma installed in the machine. This solution offers virtually unlimited possibilities for coating any type of surface. In order to meet all demands and requirements, the KOLZER magnetron sputtering machine meets the hig ...

Key data: 500 mm, 1000 mm, 5000 1/min

Machine Details Stock-No. 1105-04017 Type of machine CNC Lathe - Inclined Bed Type Make MAZAK Type SQT 200 L Year of manufacture 2003 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time Immediatly Freight basis Ex site Price Technical details turning diameter 360 mm turning length 1000 mm control MAZATROL FUSION 640 T swing diameter 350 mm spindle turning speed - stepless 5000 rpm Spindle Motor 15 kW Bar Material Dia. 51 mm X-Axis 190 mm Z-AXIS 1000 mm weight of the machine approx. 5 t dimensions of the machine approx. 3.6 x 1.8 x 2.0 m Accessories 12 - Tool Turret Tool - Eye tailstock

used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg

Machine Type: TIG Welding Machine Water-cooled DC and AC system Make Dalex Type TGKW 55 Connection voltage 2 x 400 volts Adjustment range 3 – 225 amps Duty cycle 60% ED at 225 amps 100% ED at 175 amps Current setting 5 switching levels max. weldable material thickness 6 mm Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 Amps Dimensions L x W x H 1,300 x 600 x 850 mm, incl. bottle cage Weight approx. 200 kg Age approx. 30 years Condition workshop-tested incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20, 4 mtr. 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped Warranty: 6 months from the date of delivery Original price €3,400.00 + VAT  ...

GEKA HYDRACROP 55/S hydraulic ironworker machine built in 2008 in Spain, is a highly versatile and multifunctional machine that allows a wide range of workpiece machining. Its rigid, sturdy structure is equipped with 5 work stations, designed for the precise hole and corner punching, as well as shearing flat bars, angle bars and solid bars. Each work station is controlled by two hydraulic cylinders, which provide the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55/S ironworker machine weighs 1390 kg. Technical data of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade leng ...

Rated output at 50% ED: 4kVA Clamping force: 200daN Compressive strength: 80daN --- Incl. additional options: -Post annealing equipment -Trolley -Grinding machine for deburring --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Carrot processing machines for black carrots etc. till storage bunkers Pos. 1.42 /max. 20 t/h / 2017 Carrot unloading station Pos. 2.43 Dry soil remover Pos. 3.44 Weed and gras remover Pos. 4.45 Cyclone stone separator Pos. 5.46 Water bath with conveyor to Pos. 6.47 Pos. 6.47 Washing machine with conveyor to Pos. 7.48 Pos. 7.48 Sorting conveyor belt with rejection conveyor belt for rejected vegetables Pos. 8.50 Conveyors with scales till Pos. 9.51 Pos. 9.51 2 x storage bunker, capacity: 2 x 25 tons, (with conveyors to Pos. 52) Further machines for the production of carrot juice concentrate are available used, sold as it is, where it is, price ex location

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 21 Max. current (A) 36 Starting Current Circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401313 Year of construction 2023 Condition: Optical 2, Technically ok used (Technical changes and prior sale res ...

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V

- Flow forming machine FLOTT SB 20 FB plus - Tapping device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - EMERGENCY STOP push button - Thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug Flow molds for the production of threads in thin-walled metallic materials, Flow forming capacity at 3 mm sheet thickness 8 mm - Spindle: MK II - Drilling depth (mm): 100 - Projection (mm): 240 - Column diameter: 82 mm - Usable work surface (W x L) (mm): 340 x 280 - Table height adjustment with rack and pinion - Spindle speeds infinitely variable (1/min): 20 – 4,000 - Dimensions (mm): 355 x 705 x 1825 For more TECHNICAL DATA, please refer to the product sheet! 3-year warranty for single-shift operation Deliv ...

Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

ID3354 Unimog - 4x4 year/Baujahr 1982 Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and mud drilling), with piston pump with approx. 200 litres per minute for core drilling, with centrifugal pump for well drilling (supplied loose), two-stage power rotary head (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, flush drilling max. 600mm in air-lift or suction flush drilling (additional equipment: drilling diameters up to 290mm are possible in rotary drilling), without casing machine Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and flush drilling), with piston pump with approx. 200 l per minute for core drilling, with centrifugal pump for well drilling (loosely enclosed), power rotary head two-stage (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, fl ...

Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 155098 Construction year 1997 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Number of brushes n/a Number of spindles n/a Condition machine working Control type B&R Electric connection 3x400V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg