combin used for sale

Key data: 48 KW, 60 kVA

We currently offer: No. 008 Atlas Copco generator set Type: QAS60 Engine Perkins 3910/1500 Power 60 KVA / 48 KW Generator LeRoy Somer Hz 50 RPM 1500 IP 23 AVR control R250 Year of construction 2013 dB 87 Connection: 16A, 32A, 63A, socket Operating hours 19532 Metrics L: 2.80m W: 1.15m H: 1.75m Weight: 2130 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 118 KW, 200 kVA, 400 V

Sokratherm Gas CHP GG 110iSI – MAN E2866 E301 Gas electricity and heat generator from 1998, with 21,019 operating hours, with control. 1 available 110 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Marelli Motori M7B 250 MC 4, 200 KVA Manufacturer: Sokratherm Model: GG 110iSI Type: Gas CHP Serial Number: 808259 Engine: MAN E2866 E301 – 118 KW Electrical power [KWel]: 110 Thermal power [KWth]: 200 Gas capacity [KWgas]: 344 Year of Make: 1998 Hours: 21,019 Weight unit [kg]: 3,320 Dimensions LxWxH [m]: 2.80 x 0.90 x 2.20 AC Generator Marelli Motori M7B 250 MC 4 Manufacturer: Marelli Motori Model: M7B 250 MC 4 Type: AC Synchronous Generator Serial Number: MD-1990 Power [KVA]: 200 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 289 Speed [1/min]: 1,500 Year of Make: 1998

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault desp ...

Key data: 250 KW

MAN gas engine is available with very low hours. Type: E2842E312 Scope of supply: CHP Gas line Control Panel Exhaust gas cooler Enclosed silenced container

Key data: 264 KW, 450 kVA, 400 V

Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994

Key data: 2000 KW, 2500 kVA, 400 V

2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.

Horizon AFC-544 AKT, Year 2006 Flatfeeder 4 pockets 1 knife 2 side pockets delivery LCV-54 Etc. Available: at short term

Key data: 664 KW, 830 kVA, 400 V

Running hours 60,000

Key data: 75 KW, 112 kVA, 400 V

Buderus Gas CHP EN 70 MAN E0836 E302 Gas electricity and heat generator from 2014 with 81,648 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Gas CHP Engine: MAN E0836 E302 Serial Number: 100006776 Power [KW]: 75 Year of Make: 2014 Hours: 81,648 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 30692/5 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 440

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

Key data: 150 KW, 220 kVA, 400 V

Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010

Key data: 2000 KW, 2500 kVA, 10500 V

2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number

Key data: 70 KW, 63 kVA, 400 V

HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315

The C400 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers Planing width 400 mm Dressing table length 1800 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Engine V400/50 3 kw / hp Amplified motor possible 4 kw/ 5.5 hp (not necessary) Weight approx. 800 kg Machine with Hammer Austria

The C300 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers The machine can be either 3 or 4 hp / 2.2 kw 3 kw S6 also 3 kw or 4 kw. Planing width 300 mm Dressing table length 1500 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Weight approx. 600 kg Machine with Hammer Austria

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Planing width mm 260 Dressing table length mm 1040 Max. saw blade diameter mm 250 Saw blade spindle mm 30 Max. saw blade protrusion from the table at 90 mm 75 Max. saw blade protrusion from the table at 45 mm 60 Cutting width at the rip fence (longitudinal cut) mm 500 Milling machine Max. usable spindle length mm 75 Milling machine Max. tool diameter for profiling mm 160 Milling spindle speed rpm 4000/6500 3 motors in V.230 1 PH  

Key data: 20 KW, 400 V

Remeha Gas Generator ELW 20-43 Gas electricity and heat generator from 2014 with 51,151 operating hours. Closed unit with control. 20 KWel x 1,527 rpm, 400 V/50 Hz. Model No.: ELW 20-43 R0048 Type: Gas Electricity and Heat Generator Serial number: SK0714A-ETWD-020136 AC generator (asynchronous): Weier DASGM 225/45 AC Generator Speed [1/min] 1,527 Engine: Toyota Power [KWel]: 10-20 Power [KWth]: 29-46 Voltage [V]: 400 Current [A]: 37.5 Frequency [Hz]: 50 Year of Make: 2014 Hours: 51,151 Weight unit [kg]: 880 Dimensions LxWxH [cm]: 165 x 105 x 200

This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine.

2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages

This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon air filter housing -Part Number: 45 160 92 901 -Inlet/Outlet: Ø 65/61 mm -Quantity: 47 combination air filters available -Price: per piece -Dimensions: Ø 225/305 mm -Weight: 2.35 kg

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

High-frequency ignition system, heating, gas and oil burners -Type: Dungs Gas Multibloc Control and Safety Combination MBC-300-VEF -Voltage: 230 V -Frequency: 50-60 Hz -Power: 120/16 W -Number: 10 valves available -Price: per piece -Dimensions: 235/135/H115 mm -Weight: 4 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon combination air filter, air filter housing -Part Number: 45 160 92 951 -Inlet/Outlet: Ø 68/71 mm -Quantity: 22 combination air filters available -Price: per piece -Dimensions: 300/225/H305 mm -Weight: 2.5 kg/pc.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon combination air filter, air filter housing with connecting hose -Part Number: 45 225 92 304 -Inlet/Outlet: Ø 70/80 mm -Overall dimensions: 950/270/H280 mm -Weight: 8 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Dough rolling and shaping machine, combination rolling machine, rolling machine -Roll width: approx. 600 mm -Rolling thickness: from 0.3 - 30 mm -with round and long wire type: SR0 -flour container -16 A-CEE plug -Connection: 380 V, 0.75 kW -The rolling machine is mobile -Dimensions: 1900/1250/H1900 mm -Weight: 430 kg

Buderus combined heat and power plant EN20 Bosch KWK System GmbH Lollar CHP module / chip modules Engine VW 2.0L CBS Natural Gas Power output 19 KW Generator KOEZIE 225/4 Thermal power 34 KW with 1000 litre tank hot water Stainless steel chimney etc Available now! Tel. 01715213204

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Machine name: Combined heat and power plant used Manufacturer: SEnergie GmbH Type: G6.12TI Year of Make: 2008 Generator: NEWAGE STAMFORD Generator Type: UC. I274D2 Generator kW: 100 kW Fuel Type: Sewage Gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88.9% Dimensions: L 3,500 x W 1,100 x H 2,500 mm Curb weight: 3,000 kg Tech. Documentation: Yes Note: In 2018, a new engine was installed and the generator was rewound. Last service 15.10.2021 at 86,102 h Accessories: A control cabinet Condition: Used Price: On request

2 pieces of natural gas CHP in container Engine: Jenbacher J420 Engine version: B25 Power each: 1339 kW at altitude 1900 meters, at NN the power is 100 kW higher! Year: 2013 Generator: Leroy Somer LSA 52.2 L70 4P with 1970 kVA power Voltage: 400 V Hours: 13200 and 15600 The power generators were regularly serviced and checked. The systems are dismantled and immediately available. Subject to prior sale - errors possible! Internal reference number: E-1004-114

Key data: 997 KW, 1222 kVA, 400 V

For sale is a used gas generator of the brand Gastechnik with Deutz MWM TBG 620 V16 engine with accessories. The accessories consist of: 4 control cabinets. Gas line. Heat exchanger. Electric pump etc. Power: 1222 kVA / 997 kW Year of Make: 1998 Nominal voltage: 400/231 V Frequency: 50 Hz COS φ: 0.8 Generator: Stamford HC.1734F2-CG (Newage) Weight: approx. 10,000 kg

Key data: 180 KW, 223 kVA, 400 V

MDE Gas Generator (CHP) MBK 2876 LN Sewage gas electricity and heat generator from 2001 with unknown operating hours, control has defect. 173 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: MDE Model: MBK 2876 LN Type: Natural Gas Electricity and Heat Generator Serial number: E 20464 Power [KWel]: 173 Power [KWth]: 289 Voltage [V]: 400 Current [A]: 346 Frequency [Hz]: 50 Engine: MDE BK 2876 LN – sewage gas Engine power [KW]: 180 Year of Make: 2001 Operating hours: unknown Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 1.90 x 2.20 AC Generator Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: Leroy Somer Model: LSA K46.1 VL12TR C11/4 Type: AC Synchronous Generator Serial number: DJ07B532/02 Power [KVA]: 223 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 321 Speed [1/min]: 1,500 Year of Make: 2001 We ...

Key data: 54 KW, 60 kVA, 400 V

Remeha Gas Generator ELW 50-100 Gas electricity and heat generators from 2016, 32,728 operating hours, closed module. 1 available 50 KWel x 1,500 rpm, 400 V / 50 Hz. Manufacturer: Remeha Model: ELW 50-100 G2488 (identical to 2G G-Box 50) Type: Gas Electricity and Heat Generator Serial Number: MH0316C-EMEB-050356 AC generator (asynchronous): 2G WKASYG250/4-330T-GG AC generator speed [1/min]: 1,517 Engine: MAN E0834E302, 54 KW Power [KWel]: 50 Power [KWth]: 100 Voltage [V]: 400 Current [A]: 73 Frequency [Hz]: 50 Year of Make: 2016 Hours: 32,728 Weight unit [kg]: 1,800 Dimensions LxWxH [m]: 2.80 x 1.20 x 2.10

Key data: 63 KW, 73 kVA, 400 V

senergino Gas Generator (CHP) SBG 50EL 4.12 TI. E Gas electricity and heat generators from 2011 with unknown operating hours, closed unit with control. 63 KWel x 1,500 rpm, 400 V/50 Hz. Leroy Somer LSA 43.2L8 C674, 73 KVA Manufacturer: senergino Model: SBG 50EL 4.12 TI. E Type: Natural Gas Electricity and Heat Generator Serial Number: D2N002416 Power [KWel]: 63 Voltage [V]: 400 Current [A]: 105 Frequency [Hz]: 50 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 1,940 Dimensions LxWxH [m]: 2.95 x 1.00 x 2.20

Key data: 360 KW, 360 kVA, 400 V

2G agenitor 408 Complete Container CHP Fuel: Natural gas Commissioning: November 2022 Hours: 4328

5pcs power generator (power plant) total power : 6750KVA, was completely overhauled in 2017 equipped with new control and higher-level regulation., the system was responsible for the emergency power supply of a large data center until 2025 was always kept up to date with the latest technical standards and continuously maintained and serviced, the system is in excellent condition. Engine: Deutz MWM TBD604 BV12, 200h operating hours, year 1994, Pgebqwdsyzb R Tskpgok Generator: Siemens 1FC7 567, 10.000V, 50Hz, 78A, 1350KVA, Aggregate control: DEIF , Genset control, new Version Year 2016/17, Higher-level control: DEIF, Load management, synchronization, fuel managemente, ec. ec. Year 2017, Circuit breaker 10KV : Siemens Silencers, recirculating coolers, pumps, ec. ec.

working width: 510 mm; cutter head: Streifenmesser; number of blades: 4; surface table length: 2000 mm; fence tilting: ja; surface table fold up: manuell; maxilum thickness planing height: 230 mm; height adjustment thickness table: electric; read out table height: digital; feed speed: 7 / 14m/min; infeed roller: Stahl; outfeed roller: stahl; pressure beam: durchgehend; table roller: ja; motor power: 5,5 kW; motor brake: ja; suction connection: 160mm; machine legth: 2200 mm; machine width: 950 mm; weight: 800;

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

- Tape inserter - Standard Model

- Tape inserter - Standard Model

- Tape inserter - Standard Model

- Tape inserter - Standard Model

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...