combi used for sale

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

Hiwell batter mixer II, Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter., Advantages, 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation., 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium., 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder., 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operat ...

Combined flat and cup grinding machine make KLAIBER type HV 2Masch. -No: 641 built in 1965Grinding area: 400 x 100 mmGrinding height: 200 mmCup grinding: 150 x 80 mmTable mounting surface: 500 x 150 mmmagnetic clamping plate: 300 x 150 mmHeight of the magnetic disk: 80 mmGrinding wheel size: 150 + 175 mmSpindle speeds: 3560/3360 rpm.Drive power: 1.5 hpWeight approx.: 430 kgWith- combined for horizontal and vertical use- Grinding wheel dressing device- wet grinding device- Suction deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

4-fold Combined Sectional Shear make PEDDINGHAUS type PeddyMachine -No: 4061257680021, built in 1980PROFILE STEEL SCISSORS:L-steel 90 ° cut: 80 x 8 mmL-steel 45 ° cut: 50 x 6 mmPROFILE STEEL KNIFE:L-steel 90 ° cut: 60 x 6 mmT-steel 90 ° cut: 60 x 7 mmL + T steel 45 ° cut: 50 x 6 mmSPECIAL BLADES:U-steel: 80 mmI-steel: 100 mmFlat steel: 80 x 12/120 x 8 mmSTEEL BAR CUTTER:Round steel: 28 mmSquare steel: 25 x 25 mmFlat steel shears: 100 x 11/10 mmThree-notch claw: 8 mmStrokes per minute: 36Drive power: 1.5 kWWeight: 460 kgExternal dimensions approx. 1200 x 1000 x 1600 mmWith:- electrical alignment and footswitch- Triangle notching (upper and lower knife missing!)- bogieused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We wo ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

5-way combined iron worker with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: 0171793397130 built in 1993Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel scissors L-steel 90 °: 140 x 13 mmL-steel 45 °: 70 x 7 mmSteel bar scissors round / square: 45/42 mmNotching device: 10 mmHole punch punching force: 55 tProjection: 510 mmpunches: 30 in 16 mmStroke of the punch stepless: 0 - 60 mmNumber of strokes of the punch with 20 mm travel: 42 strokes / minDrive power: 5.5 kWWeight about 1500 kgWith- support tables- various accessoriesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2 nos. GE PG9171E 180MW / 50 Hz gas fired combine cycle gas turbine power plant, year 2004, around 31,000 hr - 34,300 hr, Steam turbine is 60MW each , and complete with heat recovery boiler. Welcome enquiry for buying only 1 or 2 gas turbine or includes engineering works.

CAST FILM EXTRUSION LINE SML winding unit This production line was professionally dismantled in 2017 Designed for COEX- cast foil production. Processing of thermo plastics in a temperature range of 150-300°C. The system can be operated with the following combinations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output max. 900 kg / h Main extruder: 105/33 L / D max. 650kg / h Extruder CO .: 90/33 L / D max. 250kg / h Foil width NET: 800-1400 mm Thickness: 25-530 µm Production speed 8-150m/min Roller width: 1600 mm Max. Roll weight: 2000 kg Version with Airnife and vacuum box One gravimetric dosing device with 3 stations per extruder Each extruder is equipped with a melt pump and a 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-cont ...

working range without repositioning X: 2535 mm working range Y: 1300 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2200 Watt Plate thickness max.: 8 mm Beam on: 4.390 h Standard equipment: - Work range X-axis 2535mm for combined operation - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - head quick change device - Programmable cutting gas/Pressure settings - Capacitive height regulation - Compact dust extractor - 2 sheet clamps - automatic tool change with 19 stations (21 minus sheet clamps) - Full rotation of all tools - NC-controlled, maintenance free 3-phase motor - Repositioning device - quick shut-down of hydraulic system - automatic machine shut-down - tool length compensation - chutes for parts 500 x 500 mm - punching slug suction system - metal forming possible - tool spray lubrication - Programmable stripper - adaptive stroke lengt ...

4-fold combined profile steel shears make PEDDINGHAUS type Peddimaster 80/110, built in 1993Technical specifications:FLAT STEEL SHEARS:500 x 18 mm:400x19mm:300x22mm:200x25mmKnife length: 510 mmPROFESSIONAL STEEL SHEARSAngle steel 90°: 120 x 13 mm:150x100x12mmAngle steel 45°: 100 x 10 mmRound bar: 45 mmSquare steel: 40 mmSQUARE NOTCHSheets up to: 13 mmLatch width: 65 mmNotch depth: 85 mmHOLE PUNCHPunching force: 80 tProjection: 510 mmStroke continuously adjustable: 10 - 30 mmHoles: 30 in 20 mm:27 in 20mmGENERAL MACHINE DATANumber of strokes: 22 / 16 h/minOil filling: 80 lDrive power: 7.5 kWWeight approx.: 2450 kgExternal dimensions approx.: 1990 x 850 x 1890 mmwith- stop table- 2 footswitches- Rectangular notcher- large lot of punches and matricesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

working range without repositioning X: 3085 mm working range Y: 1740 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2400 Watt Plate thickness max.: 8 mm Beam on: 2.763 h Standard Equipment: - Working area for combined laser/punching 2585 x 1650 mm, for punching 3085 x 1740 mm, laser-cutting 3085 x 1650 mm each without resetting operation - HI-Las High pressure nitrogen cutting - laser head with 7,5 lens - programmable repositioning cylinders - quick stop function - Blow-out device for small parts - Safety light barriers - manual Additional equipment: - additional clamp and possibility to open one or a pair of clamps - Prepared for Multitool - Function tapping Automation: - TRUMALIFT SheetMaster FMC - sucker plate - Trumasort L - TRUMATOOL 40 - TRUMAGRIP New Resonator in 2011

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 15 mm Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output -  ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

5-fold combined profile steel shears with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: HIW550/510/94 built in 1999Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel shears L-steel 90°: 140 x 13 mmL-steel 45°: 70 x 7 mmSteel bar shears round/ square: 45 / 42 mmNotch: 10 mmPunching force: 55 tProjection: 510 mmpunches: 30 in 16 mmInfinitely variable punch stroke: 0 - 60 mmNumber of strokes of the punch at 20 mm path: 42 strokes / minDrive power: 5.5 kWWeight approx.: 1600 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. 4-fold combined profile steel shears make MUBEA type KLSH 550Make -No: 0155682757250Technical specifications:Capacity of the flat steel shears: 200 x 20 / 400 x 16mmCutting length: 400 mmPerformance of the profile steel shears:L-steel: 120 x 13 mmor: 130 x 90 x 12 mmRound bar: 35 mmSquare steel: 32 mmU steel: U 160Hole punch performancePressure capacity: 50 tStroke:50mmpunches :30 in 15 / 28 in 16 mmProjection: 320 mmPerformance of the release devicetriangle notcher:L + T - iron: 75 x 8Notch depth: 80mmLatch width: 40 mmGeneral data of the machineDrive power: 7.5 kWDimensions L x W x H: 1160 x 550 x 1840 mmWeight approx.: 1.1 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for yo ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 5000 W Beam on: 21.067 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 12 mm Standard configuration - Closed machine frame with integrated laser unit - Automatic pallet changer - Conveyor belt for small parts / slug - Gantry drive in combination with direct linear drives - Universal quickchange device for cutting head - Lens cutting head with 250mm focal length - Programmable cutting gas pressure - ControlLine: automatic height control and sheet edge detection - AutoLas Plus (FocusLine) - Laser power control - Positioning laser diode - SprintLine (FastLine) - PMS (PlasmaLine) - Automatic metal sheet detection - PierceLine - Programmable power cycles - Work area lighting - Automatic shut-down devi ...

Combined drilling and milling machine make KNUTH type VBF 40Machine -No: 604046Technical specifications:Drilling capacity in steel: 38 mmTapping: 25 mmEnd milling up to: 25 mmCutter heads up to: 75 mmSpindle mount: MK 4Throat: 300 mm16 spindle speeds: 120 - 1600 rpm.Quill stroke: 120 mm3 automatic feeds: 0.15 / 0.23 / 0.3 mm / revTable size: 850 x 250 mmmax.distance spindle / table: 450 mmX x Y x Z: 470 x 270 x 460 mmDrive power: 2.2 kWWeight approx: 750 kgExternal dimensions: 1150 x 1070 x 2000 mmWith- Work table with attached air table 1200 x 1200 mm- stepless speedsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- CE certification - Complete, original wood Her machine documents and operating instructions - Weight: 720 kg (basic machine), approx. 860 kg (machine with aggregates) Assembly: • Control panel (1888) SK 180 • Fully automatic edge feeding (1903) - Edge thickness striped goods 0.3 - 8 mm - Edge thickness rolled goods 0.3 - 3 mm - max edge height 51 mm • Adhesive application station (1906 M) - with hot melt adhesive cartridge - via sword nozzle with electro-pneumatic control - Temperature selector - Heating time approx. 5 min - Temperature approx. 190 - 240 degrees Celsius - Workpiece thickness 6 - 45 mm • Printing Unit (1912) • Cross-cut unit (1918) • Combino milling unit (1942 M) - for flushing, chamfering and radius milling • Pull blade unit (1929) - Edge thickness max. 3mm • Sandbar unit (1940) • 2 x suction connections 70 mm each • Compre ...

3-fold combined hydr. Sheet metal working machineHydraulic folding machine - press brake - guillotine shearsMake GRIEBEL type SAS 75-30-4 built in 1981Technical specifications:PRESS BRAKE PERFORMANCEWorking pressure: 75 tWorking length: 3050 mmProjection: 120 mmStroke: 270 mmForward speed: 37 mm / sec.Working speed: 0 - 30 mm / sec.Return speed: 45 mm / sec.Number of angle programs: 6PERFORMANCE BENDING MACHINELength: 3050 mmSheet thickness: 3.0 mmProjection: 400 mmStroke of the upper beam: 290 mmForward speed of the upper beam: 37 mm / sec.Return speed of the upper beam: 42 mm / sec.Working speed of the bending beam: 45 ° / sec.Number of bending programs: 6PERFORMANCE TABLE SHEARSCutting length: 3050 mmmax.sheet thickness: 4.0 mmCutting angle: 1 ° 20´Knife strokes: 10 - 15 H / min.Number of hold-down devices: 20Pressure of the hold-down device: 250 kpProjection: 270 mmGENERAL DATA:El ...

NEMESIS 5100 - Universal hardness tester with turret head (saves changing indenting bodies and lenses) THE ultimate universal hardness testing machine - all-rounder: stand-alone or fully automatic hardness gradients (requires motor XY table) This hardness testing machine sets the reference in the current state of the art. The basic function is based on a test head lowering to the test piece on which a turret head with up to 8 positions is installed. This is particularly advantageous if the test piece is very heavy or if an automatic feeding system is to be used. In addition, the user does not have to worry about focusing: The automatism finds the correct test height / focus distance automatically (detecting search). The desired hardness test method can be conveniently selected on the large touchscreen monitor. Now the operator presses START and the automated test begins: - aut ...

Combined wood milling machine with crosscut saw make STEHLE type FC 3 BMasch. -No: 12761 Year of construction Nov. 1966Table height: 855 mm4 milling spindle speeds: 3000/6000/5000/10000 rpm.Milling diameter: 30 mmSpindle cone: MK 5Height adjustment of the milling shaft: 115 mmSaw blade diameter: 350 mmSaw blade hole: 30 mmGreen cutting height: 110 mmSaw blade speed: 2800 rpm.Drive power: 3/4 / 2.2 kWDimensions L x W x H: 1910 x 1950 x 1200 mmWeight approx: 880 kgWith- Swing arm roller table 1040 x 460 mm- Footbrake double-sidedused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Micro hardness tester Vickers HV0,001 to HV 30 (depending on type) from 1 gram - all force levels force-controlled The FALCON 400 series are micro-hardness testers for a test force range of 0.001 to 30 kgf (depending on the type) for the micro Vickers, Knoop and Micro-Brinell hardness testing methods. The unique test force load system includes an electronic control system in the closed control circuit and sensor technology with force feedback. In addition to the electro-mechanical test force load, the FALCON is equipped with first-class mechanical and optical components. The innovative software functions of the I-Touch™ "control" allows the storage of results, creation and storage of test programs, overwashing of results (limit input), conversion to other hardness scales and curvature corrections for measurement on unplanned test surfaces. The digital / optical hardness impressio ...

Water Chiller DONALDSON ULTRAFILTER SL MODEL ULTRACOOL 0500 SP E6811024-20 Donaldson's Ultracool series water chillers combine high efficiency with low energy consumption, optimizing water use and ensuring process safety. The use of closed-loop water chillers allows water recirculation and ensures the preset optimum temperature. The Ultracool carries the water to the heat exchanger, where a separate cooling circuit cools it. An item that has been used previously. Practically unused. It is fully operational and works as intended. Brand: Donaldson. Product in Stock. Get a shipping and tax estimate by adding the item to your shopping cart. The estimated delivery time will depend on the choiceed shipping service and the receipt of the compensated payment. Delivery times may vary Payment We accept PayPal and all major credit cards. TESTED.: YES In case of malfunction; You h ...

The additional prefix of Rex is suitable for filling mixtures of different types It can be attached to the filling machine without much effort The pneumatic cutter cuts off a portion of the required length – from 20 to 40 mm., and it is also possible with other parameters. The parameters are saved in a program and stored in the filling machine. In combination with a Rex tape, you can get an automatic line. It can be used for different types of kebabs made of meat, fish, cheese, dough, granules for soups, rice, etc. After connecting the portioner, only the electronic connection needs to fit into the clip terminal. Technical data Drive type: pneumatic Operating pressure: 4 – 6 bar Caliber of funnels: 20-40 mm. possible others Portion range: up to 480 pcs. / min. Price in euros: 3 600 without VAT

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle siz ...

Roche COBAS TaqMan + AmpliPrep Amplification Detector Manufacturer's description, all information without guarantee. Automated real-time amplification and detection analyzer. A high-capacity sample format that enables automated real-time amplification and detection of DNA or RNA for up to four assays simultaneously. In combination with the docking station, this system enables fully automatic sample transfer - from the COBAS® AmpliPrep instrument to the COBAS® TaqMan® Analyzer. Characteristics Works with the COBAS® AmpliPrep instrument and docking station for complete automation of sample preparation, amplification and detection Works undocked with the COBAS® AmpliPrep instrument AmpLILINK software provides a simple and efficient user interface for the custom-built Windows-based® PC that comes with the system Automated and fully docked systems available with COBAS ...

Chilworth JCI 164 High Voltage Adapter General description The JCI 146 is a voltmeter adapter component designed for integration into wider experimental systems. In combination with our JCI 140, the system enables the measurement of live conductors with voltages up to ± 60 kV DC by direct connection with an accuracy of ± 2% (nominal) with minimal load effects on the device under test. The JCI 146's high input impedance and low capacitance are suitable for more accurate DC voltage measurements. Other traditional techniques for directly measuring high voltages (e.g., high-voltage meters, capacitive and resistive divider networks, etc.) often provide inaccurate results due to load effects caused by the measurement setup. This device can be used to cross-check the calibration and accuracy of high-voltage sources by power utilities, calibration test houses and cable manufacture ...

"Packaging plant "Kombipacker 3 in 1" for the production of sales and transport packaging. Different packaging can be produced for me. It combines the functions of erecting and closing cardboard as well as the Top Loading function. In addition, both containers and loose bottles can be packed in cardboard. Packaging options - Lots 0.33 l bottles in 24 carton (12 carton optional) - Lots 0.5 l bottles in 20-caran (10-karton optional) - 4 baskets (2 x 3 ) each with 0.33 l bottle in a carton - Baskets 2 x 3 individually - 4 six-packs (2 x 3) with 0.33 l bottle to be packed in a carton Performance of the packaging machine Cartons: max. 10 cartons per min. Bottle types: 0.33 l LN or Vichy, 0.5 l NRW or 0, 5 l LN, 0.33 l Euro Baskets : 16 baskets per min. either in cardboard or individually Other types of bottles or containers may be possible. Must be examined in detail."

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + easy & fast installation & operation + Housing made entirely of stainless steel + can of course also be combined with an ice water system + Device automatically opens the required water supply, hot/cooled water + performs the right mixture until the desired temperature is reached + powerful electronic system, microprocessor-based + Water dosing from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + digital display of water temperature and quantity + Temperature is set with thermostatic mixing battery (rotary knob) + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x drain hose (2 meters length) with hook Technical data: - Dosing quantity: 0.1 - 99.9 litres or 1 - 999 litres - Temperatur ...

Vacuum packaging device CRYOVAC BM5 M340 in good used and functional condition. Combination of vacuum packer and clipper (manufacturer Tipper Tie). Designed for bags/bags, for simple packaging of poultry and large pieces of meat. Machine is rollable. Dimensions B/T/H 100/70/150 cm. Operating voltage 400 volts.

Edge grinding machine Rehnen -new- Type: Junior R 1 with motor band oscillation with support table at the deflection roller Additionally included in the scope of delivery is an angular and miter stop Engine power 2.2 kW Tape speed 22 m/sec Grinding belt dimension 2280 x 150 mm Abrasive back wall 850 x 150 mm Grinding unit swivelable 90 - 180° Grinding belt tension pneumatic Table size 750 x 350 mm The top in heavy casting with built-in three-phase motor 380 V, 2.2 kW 2850 rpm The machine is equipped with built-in switch-plug combination; Motor circuit breaker and main switch according to VDE Dimensions of the abrasive belt rear wall 850 x 150 mm the abrasive back wall is glued with a graphite sliding surface Steel table adjustable in height by spring pressure Grinding belt dimension 150 x 2280 mm The machine is supplied with 2 pieces of grindin ...

GE LM2500+ For Sale (31.3 MW, 50 Hz): GE LM2500+ natural gas-fired and associated Aalborg HRSG. The GE LM2500+ has a nominal output of 30 MW. The OCGT originally produced steam for local combined heat and power (CHP”) demand, which no longer exists. Due to this, the HRSG is kept in dry preservation and the OCGT operates using the bypass stack, providing black start and short-term operating reserve capability. Open cycle GE LM2500+ GT driving a 36 MVA generator, which is a totally enclosed air-cooled (TEAC”) design rated at 11 kV. The boiler on this unit is currently in dry preservation. The LM2500+, a design based on the very successful heritage of the LM2500 gas turbine, rolled off the production line in December 1996. The LM2500+ was originally rated at 27.6 MW, for a nominal 37.5 percent thermal efficiency at ISO, no losses and 50 Hz. Since that time, its rating has continually  ...

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

No. 28 Dry air dryer D900 with MC1 - funnel individ. can be combined Somos D900 with MC1 control for plastic granules Completely overhauled: January 2020 with 1 year warranty except wear parts Colour: Turquoise blue Dry air quantity: 900m3/h Heating capacity dry air: 36 kW Heating capacity regeneration: 13.5kW Drive power: 4.4 kW Total closing value: 53.9 kW Dimensions: 110x100x191 (LxWxH in cm) Weight: 780kg Additional information: On request also combinable with funnel: 100l, 200l, 400l, 600l Dimensions: 110x150x210 cm (LxDxH) Weight: 780kg

TECHNICAL DATA: Complete production line for Blockhaus processing consisting of 02 machines: Hundegger joinery machine model K3 and special Friulmac system model Idramat SQ The combination of the two machines allows the realization in a continuous cycle of: Bungalows Garden sheds Temporary houses Small houses Tourist accommodations Emergency accommodation

9-colour combination offset/label press 5 x offset cassettes in 25 x , 23 , 22.25 , 2 x Offset Cassettes 24 x . 2 x Flexo 2 x screen printing 1 x cold foil embossing Sensotec autom. Register control,only for longitudinal register control Amal Non - Stop reel changer, unwinding and winding Corona Pre-treatment - Vetaphone Track edge control BST Wandres railway cleaning Lamination Painting Low Migration Punch Gapmaster Kocher Beck back pressure Baldwin Cooling 9x UV Dryer GEW Cooling plates Turning cross to plant 3

8-colour combination offset/label press 5 x offset cassettes in 25 x , 23 x 2 x Offset Cassettes 22.25 . . . . 2 x Flexo 2 x screen printing Sensotec autom. Register control,only for longitudinal register control, cross registers manually Amal Non - Stop reel changer, unwinding and winding Corona Pre-treatment - Vetaphone Track edge control BST Wandres railway cleaning Lamination Painting Low Migration Punch Gapmaster Kocher Beck back pressure Baldwin Cooling 8 x UV dryer GEW Cooling plates

The Comitrol® Model 1700 processor offers the highest level of versatility in the Comitrol range. It has reduction heads of 152.4 mm (6") in diameter and is available in the three configurations below. The input product depends on the reduction head style, turbine selection and spacing within the head. In general, the maximum size of the incoming product must not exceed: Cutting head: 63.5 mm (2-1/2") Microcut head and cutting head: 9.5 mm (3/8") The sealed enclosure prevents the dispersion of dust, vapours and liquids when the Comitrol processor is installed in combination with a collection system. The stainless steel design ensures maximum durability and hygiene. The machine is equipped with contact parts with the stainless steel product, and offers continuous operation for uninterrupted production and simplified design for easy cleaning and maintenance. A sealed enclosure pre ...

Towed chopper TP 760 P, wood chopper with feeder approx. 160x260 mm, combination with Reiser SCH 230 container tipper. Container loading capacity 3.5 m3, high emptying to approx. 224 cm, additional loading flap in the rear. Tyres 10.0x75-15", parking brake, Total weight 2,800 kg. Machine in non-operational condition. More bush hackers and wood chippers in stock!

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

SINO NCP 160 eccentric press built in China in 2018 by Sino Machinery & Tools (Dongguan) Co., LTD. performs machining of metal workpieces with a press force of 160 tonnes. The machine is equipped with high-quality components, including e.g. a 100 mm adjustable slider making up to 25 to 55 strokes per minute, and a YU JAIV PDH-120 indicator displaying the distance of the die between the table and the slider. The large working area, ease of operation and outstanding precision, guarantee excellent machining results. The press offers the possibility of combining it with an automatic feeding system in order to increase the number of parts produced and significantly reduce costs. The total weight of the machine is 13 tonnes. Technical data of the SINO NCP 160 press - maximum press force: 160 t - work area dimensions (L x W x H): 910 x 600 x 410 mm - bolster dimensions (L x W x H): 125 ...

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

GE Jenbacher JW 316 GS Power Generation Unit 760 kW Gas Engine For sale is a used gas generator set or CHP, combined heat and power plant with GM Jenbacher engine in good condition Specifications: Condition: very good Engine: GM Jenbacher 16 cylinder , V16 biturbo gas water cooled Type number : JW 316 GS Power : 760 KW RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts - Built in : 1996 - Incl. batteries -Switchboard -It was recently dismantled from the hospital building, and ran until the end without any problems. Scope of delivery as shown will be delivered like shown All our articles are dismantled, cleaned and visually checked for damage by expert personnel of our company before being sold. All article relevant data / information can be found in the description and the pictures. All information is given to the best of our kno ...

Few hours of use, in combination with the TRUMPF 600L combination machine

Combined punching machine, hydraulic Hydraulic Ironworkers 4 kW 900 kg

Combined heat and power plant of the company KW Energie 4 cylinder MAN gas engine with 48 kW electric power Complete with heat release and sound insulation hood Switch box with B&R control

DIASORIN Liaison Type 2229 Immunodiagnostic Analyzer The LIAISON analyzer combines a flexible operating module with a wide assay menu and results in high efficiency due to its long walk-away time. The ability to perform up to 15 different assays simultaneously ensures a streamlined testing routine even with a small number of samples. The LIAISON analyzer is designed for immunoassay testing and uses "flash" chemiluminescence technology (CLIA) with a paramagnetic microparticle solid phase (MP). The LIAISON analyzer is efficient from the start, allowing continuous loading of samples, reagents and the workload can be processed in direct access or batch mode. All test methods are based on an internal master curve with 2-point calibration. Autodilution, repeat and reflex tests are performed at the operator's request and performed automatically by the system. The LIAISON system also ha ...