combi feed used for sale

Temperature range: 30°C-300°C, water pressure: 150kPa-600kPa, power: 31.5kW, cooking programs: 350, fan speeds: 5, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1200mm. Documentation available.

A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabin ...

MORGANA Digifold Pro By combining creases and folds in a single unit, a highly productive and user-friendly mobile finishing center is created. Perforation is also possible, which optimally rounds off the range of applications. With a speed of up to 6,000 sheets per hour and a maximum format of up to 900 x 358mm, the new Digifold Pro is even more flexible in use. A large touch-screen display makes it easy to operate the Digifold Pro, as well as all other machines from the Pro generation. Versatility The Digifold Pro can be used in three different ways, depending on your needs: As a creasing machine As a folding machine As an integrated creasing and folding machine that performs both functions in a single operation. Feeder: Suction feeder pulls paper from below Paper size: max. 900 x 358 mm // Paper size min. 210 x 140 mm Paper weight max. 400 g/m² // Paper weight min.  ...

Key data: 48 KW, 60 kVA

Number 007 Generator sets Type: K0363 Engine Iveco Generator LeRoy Somer Power: 60 KVA / 48 KW Hz 50 RPM 1500 IP 21 AVR controller RS 437 Year of manufacture 1989 Hours 237 Accessories: Control cabinet Metrics: L: 2.25m H: 1.50m B: 0.70m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Large linear combination weigher, 13 5.0 liter weighing heads, for various kinds of big volume products: fruits, vegetables (potatoes, carrots, tomatos, oranges, mango, etc.). Also suitable for frozen food, such as fish or meat. - Specifications: weighing range: 200g-5kg | max. speed of the machine in neutral: 80 cycles/minute. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Very large weigher specifically for fresh/humid fruits, meat, vegetable etc. - Weighing unit with 8 linearly arranged weighing heads, memory hopper for a higher accuracy and speed , spiral conveyor supply. Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: stainless steel | protection class IP65 | max. speed of the machine in neutral: 45 cycles/minute | weighing range 10-2500g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All  ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 45 cycles/minute | accuracy: +/- 0.1-3.0g | hopper volume: max. 1l | weighing range: 10-2000g | power: 220V, 1.5kW | stainless steel | IP64 | machine dimensions and weight: L2320xW840xH1820mm, 350kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In additio ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | accuracy: +/- 0.5-2.5g | hopper volume: max. 0.5l | weighing range: 20-500g | power: 220V-240V, 1.5-2.0kW | stainless steel | IP54, weighing heads and memory hopper are made of polypropylene | machine dimensions and weight: L1294xW789xH1100mm, 320kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 d ...

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A

Combi Steamer Rational SCC101G for 10×1/1 GN, Natural Gas, can be set to LPG, 230 V, 39 kW, 1.7 A, core temperature, steam, fan speed programmable, 1/2 energy, cool down, self-cleaning, and much more, incl. manual, dimensions 85x77x102 cm, suitable substructure 2367

Combined copying milling machine - lathe MICHÄL KÄMPF

Machine name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56kW Dimensions: L 3,600 x W 950 x H 1,750 mm Curb weight: 2,200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Machine name: Combined heat and power plant used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Curb weight: 2200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Contouring machine milling sanding 8 heads BACCI mod. FC8CN - CE compliant - Unit 1-2: milling 15 Kw - Unit 3-4: milling 11 Kw - Unit 5-6: milling/sanding 4.5/3.3 Kw - Unit 7-8: sanding 3 Kw - Working height 180 mm. - Working length 2500 mm. - N. 8 pneumatic pressers - Motorized pressing frame - NC OSAI control - Yaskawa drives - CAM210 Program - Cabin on 4 sides - Year 2001

Key data: 1094 KW, 1445 kVA, 400 V

Jenbacher Gas CHP C320 GS-B Bio-gas electricity and heat generator from 2006 with 63,868 operating hours, Container with control, exhaust gas heat exchanger, exhaust silencer and cooling. 1 available 1,064 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford A06H625192, 1,445 KVA Manufacturer: Jenbacher Model: C320 GS-B Type: Bio-Gas CHP Container Serial number: 0204758/002 Power [KWel]: 1,064 Engine: J 320 GS Serial Number: 1237603 Engine power [KW]: 1,094 Year of Make: 2006 Hours: 63,868 Weight gene set [kg]: 11,000 Weight container [kg]: 25,000 Dimensions LxWxH [cm]: 1,220 x 250 x 285 AC Generator Stamford A06H625192 Manufacturer: Stamford Model No.: A06H625192 Type: AC Synchronous Generator Serial number: 0204758/002 Power [KVA]: 1,445 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2,237 Speed [1/min]: 1,500 Year of Make: 2006 Hours: 63,868 Weigh ...

Key data: 999 KW, 999 kVA, 999 V

Dear Ladies and Gentlemen, We hereby offer the following refurbished MAN replacement gas engines of the E08xx, E28xx or E32xx series. Description: • Refurbished gas engine, refurbished according to recognised quality standards • Complete engine, ready to use • Multi-cylinder V-shaped or in-line engine with water-cooled system • Water-cooled exhaust gas routing Engine versions and power ranges MAN E0834 > 60kW MAN E0836 > 75-100kW MAN E2876 > 190-210kW MAN E2848 > 250-270kW MAN E2842 > 360-400kW MAN E3268 > 350kW MAN E3262 > 530kW Repairs: • Engine block carefully checked, processed and cleaned (incl. sealing surfaces, bearing points and oil channels) • Crankshaft and camshaft checked to standard dimensions, machined and replaced if necessary • Cylinder heads as replacement components, tested and overhauled (incl. valve guides and seat rings) • Conne ...

Key data: 305 KW, 380 kVA

We currently offer: Number 71 John Deere generator set Magnaplus Generator Power 380 KVA / 305 KW RPM 1500 Hz 50 Hours: 7033 Year of manufacture 2004 Metrics: L: 3.75m H: 2.60m W: 1.35m Weight: 5 tons The engine of the generator turns, but does not start. You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 48 KW, 60 kVA

We currently offer: No. 008 Atlas Copco generator set Type: QAS60 Engine Perkins 3910/1500 Power 60 KVA / 48 KW Generator LeRoy Somer Hz 50 RPM 1500 IP 23 AVR control R250 Year of construction 2013 dB 87 Connection: 16A, 32A, 63A, socket Operating hours 19532 Metrics L: 2.80m W: 1.15m H: 1.75m Weight: 2130 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 118 KW, 200 kVA, 400 V

Sokratherm Gas CHP GG 110iSI – MAN E2866 E301 Gas electricity and heat generator from 1998, with 21,019 operating hours, with control. 1 available 110 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Marelli Motori M7B 250 MC 4, 200 KVA Manufacturer: Sokratherm Model: GG 110iSI Type: Gas CHP Serial Number: 808259 Engine: MAN E2866 E301 – 118 KW Electrical power [KWel]: 110 Thermal power [KWth]: 200 Gas capacity [KWgas]: 344 Year of Make: 1998 Hours: 21,019 Weight unit [kg]: 3,320 Dimensions LxWxH [m]: 2.80 x 0.90 x 2.20 AC Generator Marelli Motori M7B 250 MC 4 Manufacturer: Marelli Motori Model: M7B 250 MC 4 Type: AC Synchronous Generator Serial Number: MD-1990 Power [KVA]: 200 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 289 Speed [1/min]: 1,500 Year of Make: 1998

Height=1.87 m, Overall length= 0.87 m, Overall width= 1 m, Net weight= 205 kg,

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault desp ...

Key data: 250 KW

MAN gas engine is available with very low hours. Type: E2842E312 Scope of supply: CHP Gas line Control Panel Exhaust gas cooler Enclosed silenced container

Combination machine FELDER BF6-26 -used-circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, self-adjusting knife shaft---------- Technical data ----------planing width: 260 mm, number of knives: 2 pieces, planing shaft Ã: 86 mm, passage height: 220 mm, dressing table length: 1300 mm, cutting width: 780 mm, swivel range circular saw: 0- 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 0-45 Â, useful length milling spindle: 120 mm, max. cutter diameter: 220 mm, max.

Key data: 264 KW, 450 kVA, 400 V

Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994

Key data: 2000 KW, 2500 kVA, 400 V

2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.

Horizon AFC-544 AKT, Year 2006 Flatfeeder 4 pockets 1 knife 2 side pockets delivery LCV-54 Etc. Available: at short term

Key data: 75 KW, 112 kVA, 400 V

Buderus Gas CHP EN 70 MAN E0836 E302 Gas electricity and heat generator from 2014 with 81,648 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Gas CHP Engine: MAN E0836 E302 Serial Number: 100006776 Power [KW]: 75 Year of Make: 2014 Hours: 81,648 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 30692/5 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 440

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

Key data: 664 KW, 830 kVA, 400 V

Running hours 60,000

Key data: 150 KW, 220 kVA, 400 V

Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010

Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg

FOLDER STAHL T 56/4FB2 -Year 1987 -High pile feeder -Four buckles Min./max. size 150x210 mms / 560x840 mms -Air pump, Delivery -All rollers in nice conditions -Available immediately

Key data: 2000 KW, 2500 kVA, 10500 V

2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number

Key data: 70 KW, 63 kVA, 400 V

HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315

The C400 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers Planing width 400 mm Dressing table length 1800 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Engine V400/50 3 kw / hp Amplified motor possible 4 kw/ 5.5 hp (not necessary) Weight approx. 800 kg Machine with Hammer Austria

The C300 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers The machine can be either 3 or 4 hp / 2.2 kw 3 kw S6 also 3 kw or 4 kw. Planing width 300 mm Dressing table length 1500 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Weight approx. 600 kg Machine with Hammer Austria

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Planing width mm 260 Dressing table length mm 1040 Max. saw blade diameter mm 250 Saw blade spindle mm 30 Max. saw blade protrusion from the table at 90 mm 75 Max. saw blade protrusion from the table at 45 mm 60 Cutting width at the rip fence (longitudinal cut) mm 500 Milling machine Max. usable spindle length mm 75 Milling machine Max. tool diameter for profiling mm 160 Milling spindle speed rpm 4000/6500 3 motors in V.230 1 PH  

Key data: 20 KW, 400 V

Vaillant Gas Generator (CHP) Eco Power 20.0 Gas electricity and heat generators from 2016 with 52,214 operating hours, closed unit. 20 KWel x 1,540 rpm, 400 V/50 Hz. CHP Vaillant Eco Power 20.0 Manufacturer: Vaillant Model: Eco Power 20.0 Type: Gas CHP Serial Number: 21161100100186070936000041N6 Power [KWel]: 10 – 20 Power (50/30°C) [KWth]: 29 – 44 Year of Make: 2016 Hours: 52,214 Weight unit [kg]: 867 Dimensions LxWxH [m]: 1.90 x 1.05 x 2.00

Key data: 20 KW, 400 V

Remeha Gas Generator ELW 20-43 Gas electricity and heat generator from 2014 with 51,151 operating hours. Closed unit with control. 20 KWel x 1,527 rpm, 400 V/50 Hz. Model No.: ELW 20-43 R0048 Type: Gas Electricity and Heat Generator Serial number: SK0714A-ETWD-020136 AC generator (asynchronous): Weier DASGM 225/45 AC Generator Speed [1/min] 1,527 Engine: Toyota Power [KWel]: 10-20 Power [KWth]: 29-46 Voltage [V]: 400 Current [A]: 37.5 Frequency [Hz]: 50 Year of Make: 2014 Hours: 51,151 Weight unit [kg]: 880 Dimensions LxWxH [cm]: 165 x 105 x 200

Height=1.84 m, Overall length= 0.92 m, Overall width= 0.88 m, Net weight= 246 kg,

Height=0.8 m, Overall length= 0.83 m, Overall width= 0.85 m, Net weight= 102 kg,

This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine.

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.

2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages

FH310958 – 10 pcs, HXE52950 – 14 pcs, Z81874 – 24 pcs, FH310958 – 40 pcs, and Z81123 – 6 pcs. Auction-ID: A7-44806-12

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-88