combi feed used for sale

E+K SORTIERSYSTEM EMSE-55GU 800mm stainless steel vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Nimo feeding SKV 300, in very good condition, tipping height: 1,550 mm

VSA 2032 Feed 3 feed rollers 4 speeds Speeds: 4/8/9/18 m/min Roll diameter 80mm Motor 180W 400V 50Hz G&STÜ-5119032

But here I have an automation component of an old system. These are two vibratory conveyors and associated elements.

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3

with EZ3200 weighing device, Volume / capacity (m3 / l): 14, Working hours: 1, Year of construction: 1

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

Switches to Muller Martini saddle stitcher feeder: - 0416.2067.2 Switch, 26 pcs. Original price: CHF 1082.00/pcs. Retail price: CHF 400.00/pc. - 0345.3222.2 Switch, 2 pcs. Original price: CHF 653.50/pc. Retail price: CHF 300.00/pc. - 0345.3216.2 Switch, 1 pc. Original price: CHF 848.25/pcs. Retail price: CHF 400.00/pc. - 0316.3206.2 Switch, 1 pc. Original price: CHF 768.00/pcs. Retail price: CHF 400.00/pc. - 0316.3208.2 Switch, 1 pc. Original price: CHF 800.00/pc. Sales price: CHF 400.00/pc.

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

Size: 4.400 (2.750) x 1.200mm. - With Rubber wearplates (Metso Trellex SQ300) - 2 Pcs. Friedrich F2000-6-7.8 (5,6KW / 1.000RPM) Unbalance motors

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Size : 3.000 x 1.950mm. - With 2 Pcs. Friedrich unbalance motors of 2KW each. - Included: Frame with rubbers springs and springs

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Aluminum chass ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

TECHNICAL DATA: 03 Reels Installed power: 0.6 kW

Round feeder for dosing difficult-to-flow materials, trough diameter: 950 mm, trough height: 800 mm, trough capacity: approx. 0.5 m³, plate diameter: 1,200 mm; discharge via 3-arm soil agitator with wall-mounted scraper and adjustable pusher / weir. Drive via SEW adjustable gear motor with 5.5 kW. Workshop overhauled in 2017 by Belgian specialist company, not used since then.

Inv. Num. : 8916 Type: Maxis 62N Producer: IEMCA Created: 2007 Parameters: Maximum rod length: 3485 mm Rod diameter: 9-62 mm Weight: 770 kg

Closure / feeding conveyor system Gassner Ferrero Year of manufacturing: 2000"

SKS PF5 Wire Feeder and FPM8i Component Package Manufacturer: SKS Welding Systems Device type: Wire feeder devices and system components Total quantity: 14 pieces PF5-LEA 10-2-9: 1 piece PF5-L 10-2-21: 2pcs PF5-R GFS 10-2-104: 1 piece PF5-L GFS 10-2-108: 3 pieces PF5-L 10-2-8: 5 pieces FPM8i 10-13-200: 2 pieces Design: Industrial MIG/MAG wire feeders Wire drive: 4-roller system Scope of delivery: Wire feeder devices according to the above parts list

Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1540, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone  ...

Kalmeijer Feed Roller GearKalmeijer Feed Roller Gear NEWHer: KalmeijerType: Gear for Feed RollerCondition: New Gear (KGM):D These gears are part of the machine's drive train. They precisely transmit the power from the motor to the various rollers to ensure synchronized and uniform transport of the dough. Kalmeijer Pastry Machine KGMBhe KGM is a well-known type of machine in the food industry, especially in bakery and confectionery production.Kalmeijer Feed Roller (KGM):D ies is one of the conveyor rollers in the

Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, basic feed-in unit -Type: BUG622-28-54-E-000 -Number: 4x module available -Price: per piece -Dimensions: 300/100/H380 mm -Weight: 14 kg/piece

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Beckhoff, Digital Input Terminal -Type: KL1104 -Quantity: 4 pieces available -Price: per piece -Dimensions: 15/70/H100 mm -Weight: 0.1 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1408 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: EL1018 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M 090-31 -Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1418 -Number: 7 pieces available -Price: per piece -Dimensions: 15/67/H100 mm -Weight: 0.1 kg/pcs

Rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Wago, potential feed-in terminal -Type: 750-602 -Quantity: 1 piece available - Price: per piece -Dimensions: 15/67/H100 mm -Weight: 0.1 kg/piece

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Wago, 8-channel digital input terminal block -Type: 750-431 -Quantity: 1 piece available -Dimensions: 15/67/H100 mm -Weight: 0.1 kg

Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc.

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Belt conveyor on solid base frame with feed hopper -Speed: 3.4/6.6 m/min -Belt width: 190 mm -Conveyor length: 745 mm -Drive: VEM 0.14/0.25 kW, see photo nameplate -Transport dimensions: 460/1255/H1185 mm -Weight: 149 kg

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg

A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible.

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1000 mm   number of brushing station: 6 BELT GRINDING UNIT   workpiece height (max): 100 mm   spindle revolutions (min): 0.3 /min   spindle revolutions (max): 10 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1750 mm   total height: 2200 mm   total weight approx.: 1500 kg

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...

A barely used allround PCB handling station RG Elektro-Technologie for loading purposes is available. Application possibility: before AOI/after AOI/combined, PCB transport height range: 930mm-970mm, min. PCB dimensions X/Y: 80mm/50mm, max. magazine dimensions X/Y/Z: 360mm/360mm/570mm, machine dimensions X/Y/Z: approx. 1200mm/1700mm/1800mm, weight: approx. 250kg, control: Siemens S7-1200. Documentation available. An on-site inspection is possible. The image is an example.

PIOVAN Three-phase F32 feeder- 1,3kw Model : F32 Year : 1996 With holding hopper 1 Pallet Dimensions (L x W x H) : 1,20m x 0,80m x 0,80m Weight : 120 kg

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 21mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm