com used for sale

Pester Pewo pack 450 compact

Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 140 Height: 270 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment

The Vax Commercial VCSD-05 is a battery-powered floor mopping machine with a capacity of 75 liters. The two 400 W brushed motors are powered by two 12 V batteries with an output of 76 ah/h. The batteries have a capacity of 3 hours, the charging time is 8 hours. The VCSD-05 is a compact floor mopping machine with a cleaning width of 660 mm. Brushes are available as a matching VCSD-05 floor brush or as a floor pad in conjunction with a VCSD-05 driver board. Due to its compact dimensions, this floor mopping machine can also be easily transported to different floors by elevator. Used cleaning machines from Heratec are all tested for functionality, cleaned and, if necessary, overhauled. Specifications: Manufacturer: Vax Type: Commercial VCSD-05 Condition: used/good Motor (Suction:) 400 W Motor (brush): 2x 400 W Capacity wet: 75 liters Capacity extraction: 80 liters Chargin ...

GreenLine SCH 230 - Mower container with flail mower GM 130. Universal device for mowing/mulching and for simultaneous reception of the mowing material. Heavy, robust design: mulcher with leaf mallet, mowing width approx. 130 cm, adjustable bottom roller, container approx. 3.5 m³, emptying, additional tailgate in the rear for transport of z.B. straw bales or tools. Tyres 10.0x75-15.3", 10 PLY. Ab. GG 2800 kg. Power requirement from 22kw/30 HP (manufacturer's specification), 1 hydraulic connection ew (tipper connection) required! Machine with age-related defects, but operational. Equipped with inerole brake, ABE (General operating permit for public road traffic), transmission with freewheel. 1 hydraulic connection ew required. Design-identical machine also available with 150 cm mower as well as one with 150 cm and 5 m³ container. Details and prices on request.

Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;

specifications: - Welding current 315 A 80% ED - 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg

Drive : 12 KW

The ASCO GS COMPACT is a robust and efficient solution for separating and classifying coarse materials in industries like mining, construction, demolition, earthworks, recycling, and landscaping. Its strong, parallel screen bars are arranged at equal distances to reliably retain larger particles such as stones, clods of earth, or construction debris while allowing finer material to pass through for further processing. This early separation protects downstream systems, reduces maintenance, and extends the lifespan of your equipment. The compact design makes it ideal for confined spaces and mobile applications where space-saving solutions are essential. As a smaller version of the proven ASCO Grizzly screen technology, the GS Compact delivers reliable performance, low maintenance, and easy integration into existing workflows. This ensures effective material preparation, optimizes proce ...

The ASCO SD Compact with Bunker and Drum Extension Compound is a semi-mobile screening drum designed for coarse materials like soil, gravel, wood chips, various waste types, and chip bundles. Built with a robust, foldable frame, it offers maximum flexibility for the recycling and material processing industries. Its modular design includes variable drum use and adjustable rotation speed for precise results. The system supports up to four fractions within a single drum segment thanks to different perforations, a cleaning brush, and a modular baffle for efficient screening. The optional bunker expansion boosts input capacity by up to 50%, while the adjustable screen inclination and variable support plate ensure easy adaptation to different sites. Quick bunker changes in just a few hours and the drum extension for larger screening areas make this machine one of the most versatile and fut ...

1 of used motion controller, make Mayr / Pilz, type Primo Compact P21.004.0, part number 0802930, version: 1.7.3.1 (592). Came from operational ZVT packaging machine.

The ASCO SD Compact is a robust, adjustable semi-mobile screening machine designed for efficient processing of coarse materials like soil, gravel, wood chips, waste, and chip bundles, making it ideal for the recycling industry and other material processing needs. Its modular construction and innovative features deliver maximum flexibility for various applications. Variable drum control, adjustable rotation speed, interchangeable screening technology, vibration support, a cleaning brush, and a modular baffle system ensure precise use of up to four fractions within a single drum segment, a unique capability in its class. The optional bunker expansion boosts input capacity by up to 50%, while the adjustable screen inclination make setup adaptable to different sites. Additional features like Free-ride mode, a quick-change bunker system that switches in just a few hours, and a drum ex ...

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

The ASCO SD Compact with the Bunker is a robust, foldable semi-mobile screening machine designed to deliver impressive throughput and continuous material feeding for reliable performance in the recycling industry and material processing applications. The integrated Bunker provides a wider opening for material input and ensures smoother transportation. Its modular design combines variable drum control, adjustable rotation speed, interchangeable screening technology, vibration support, a cleaning brush, and a modular baffle system for efficient, precise screening of up to three fractions within one drum segment. The optional bunker expansion boosts input capacity by up to 50%, while the adjustable screen inclination and variable support plate make setup adaptable to any location. Built for a long service life, the ASCO SD Compact with the Bunker is a flexible, powerful solution for ...

ASCO Drum Extension Compound (DEC) is engineered to deliver exceptional screening performance as an add-on for the SD Compact. This innovative extension increases the effective screening area by nearly 50%, significantly boosting overall efficiency and enabling the separation of an additional fraction. Built for durability and long-term use, ASCO DEC enhances productivity and extends the capabilities of your existing SD Compact screening system, making it a smart investment for improved material separation and higher throughput. Technical details: - Capacity: 5 - 20 m³/h - Screen length: 1 m - Usable length: 0,8 m - Usable screen surface: 3,3 m² - Outer diameter: 1,3 m - Casing opening size: 20x20 mm - Shape of the casing opening: squared, rounded, triangular, rhomboid, elliptical,... - Speed (adjustable): 5 - 20 rpm - Weight: 310 kg - Width: 1,7 m - Length: 1,4 m - Heig ...

The ASCO SD Compact with the DEC (Drum Extension Compound) is a robust, semi-mobile screening machine designed for efficient separation of coarse materials like soil, gravel, wood chips, chip bundles, and various waste types. Its foldable construction makes it easy to transport and set up, providing flexibility for different material processing sites. The DEC significantly increases the effective screening area by nearly 50%, boosting performance and enabling the separation of an additional fraction. This powerful unit stands out for its modular design and innovative functions, offering variable drum use, adjustable rotation speed, and interchangeable screening technology. Its vibration support, integrated cleaning brush, and modular baffle system ensure consistent, high-quality screening results. The drum’s unique ability to use different perforations within a single segment allows ...

Reference ID PP-51907 Category Coating Manufacturer Comexi Model ML2 Year Built 2021 Color- Impression- Working Hours - Speed 450 m/min Max. size 1330 mm Min. size 500 mm Condition Good Location Europe Availability Immediately Machine Description The machine general structure: Primary unwinder Application unit Drying tunnel Secondary unwinder Lamination unit Rewinder Solvent base and water-based section (Rotogravure application trolley) Flexo printing section (application trolley in flexo) APPLICATION: Mechanical speed: 450 m/min (1476 ft/min) (Production speed depends on the support and adhesives used). Maximum web width: 1,330 mm (52") Maximum laminating width: 1.315 mm (51.7") Minimum width of web to be laminated: 500 mm (19.6") PRIMARY & SECONDARY UNWINDERS: Maximum roll diameters: 1000 mm (40") Maximum roll weight: 1000 kg (2204 lb) Mandrel diameters ...

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T

; Gross weight [kg]: 4080; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 1015; Maximum lift capacity [kg]: 450

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

- 62cm bandwidth - with digital control - Stainless steel scaffolding - can be driven on castors with locking plate

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

1 of used motion controller, make Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM-tested OK. PS: we can potentially upload your machine program onto this controller, as well as provide further related troubleshooting and issue-resolving service.

1 used motion controller, manufacturer Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM tested OK. PS: We may be able to upload your machine program to this controller and provide other related troubleshooting and resolving services.

High-precision and versatile punching/nippling machine Boschert Compact 500 CNC Z (built in 2011) – Ideal for flexible sheet metal processing! We sell a powerful and reliable punching/nippling machine from the quality manufacturer Boschert, which convinces with its extended equipment and precision. This machine is the ideal solution for a wide range of Spectrum of punching and nipple tasks, from individual parts to large series. Features that convince: • Manufacturer: Boschert • Type: Compact 500 500 x 1000 CNC Z • Year of manufacture: 2011 • Intuitive CNC control: Multi-axis Ladob control with graphical user interface for easy Programming and visualization of the machining processes. • Extended working range for greater flexibility: o X-axis: 0 - 2000 mm (allows the machining of long workpieces) o Y-axis: 0 - 750 mm (offers generous space for wide sheets) ...

Bottle filler, Fabr. SEN, type Combi-RE H2, with 30 filling organs and 6-digit KK, set up on 0.5 lt + 0.33 lt NRW Longneck + 0.5 lt EURO-Fl, running direction: left --> right, with vacuum pump (slightly leaking), discharge table, various spare parts, S5 control, incl. operating instructions, built in 1991, already removed

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.

Qty. 1 Second-hand 8 Colour Gear Machine Mfc.: Comiflex Vale 1208 Type: 8 Colour Gear Machine Built: 2011 The Printer is in immaculate showroom condition and has been serviced only by the manufacturer. Fully Automatic (Gearless), with the following technology: Ink Pump – Phonematic with Autowash Camera System – FIFE Kindly refer to the machine specifications below: Material width – 1280 mm Print width – 1200 mm Minimum repeat length – 380 mm Maximum repeat length – 840 mm Machine speed – 300 m/min. 8 Aniloxes: Face Length – 1260 mm Engrave Length – 1240 mm OD – 171.88 mm ID – 149.722 mm 8 sleeves: ID – 114.708 mm Face Length – 1210 mm

; Gross weight [kg]: 2630; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300

Teledyne Isco CombiFlash Companion/TS The CombiFlash Companion personal flash chromatography system can be controlled and monitored from anywhere with any connection and Microsoft Windows® Explorer. It even notifies you via email once the separation is complete. The system's advanced automation and communication features give you the highest levels of productivity and peace of mind. This allows you to devote yourself to other tasks undisturbed while the cleanup is in progress. The touchscreen controller allows you to control the system locally on a clear screen. The optional solvent management module controls up to four solvents online and monitors their levels, so you're never left without solvents. Companion uses precision-packed RediSep® RF columns to extract more virgin material in less time than glass columns or other disposable columns. Columns from 4 g to 330 g can be ...

We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...

We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale

COMEC Pearl Mill M 8 Stainless steel Double jacket Container capacity 8 l Very good ready-to-use condition, directly from production!

; Gross weight [kg]: 2330; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 815; Maximum lift capacity [kg]: 450

Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg

Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg

Measurement data acquisition device, test device, communication system, data acquisition system -DSM: Nanoserver 96M1566L -suitable for: mobile applications -Input: 8-30 V DC, 15 A -Dimensions: 245/220/H120 mm -Weight: 2.8 kg

450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

355 x 200mm aperture. Usable aperture of 155mm. Conveyor width of 300mm. 850mm line height with adjustable feet. 475mm weigh pad length. Right to left production. M&S spec machine.

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

REF-2233 COMACO AGM 6 SEAMER WITH NON-MOTORIZED PLATE AND 24-VALVE VACUUM FILLING MACHINE (I) COMACO AGM 6 automatic can seamer with non-motorized compression plate. Can size: ø73mm. Complete with a 24-valve vacuum filling machine (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,400mm.

Pausch X-ray imaging workstation Compact CS 3000 with the following system components Generator Genesis DT_Baujahr 2017 Tube RAD 14 0,6/1,2 Fa. Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by t ...

Vacuum filler, make SEN, type: Compacta FWF 30/6, for about 5.000 bph, with 30 filling valves and 6-head nature corker, adjust to 0,7 lt / 0,75 lt "Bocksbeutel"- and 1,0 lt wine bottle, built 1985

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...