com used for sale

An oil-injected stationary compressor CompAir is available. Stages: 2, Air flow rate: 17m³/min, Max. operating pressure: 12bar, Machine dimensions X/Y/Z: approx. 3300mm/1800mm/2000mm, Weight: approx. 3900kg. Documentation available. An on-site inspection is possible.

Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: Compressor with refrigeration dryer and oil separator, Capacity: 8 m³/min, Stage pressure: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz, Length: 1,80 m, Width: 0,92 m, Height: 1,80 m

Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999

Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999

Used Filling Monoblock Alfatek Easy Compact 2018Used Filling Monoblock Alfatek Easy Compact 2018MONOBLOCK Mod. ROBOT COMPACT 7/1Machine suitable for treating refermented beer in the bottle. Machine suitable for treating Steinie Flasche 0.33 I bottlesHeight 174mm — diameter 70mmComposition:• Elvira LP Series filler with 7 filling valves• Single-head crown capper Mod. Eagle/C”Max. production: 500/1000 bph with 330 cc bottles and product without foam.Production may vary according to the type of product to be bottled.Power supply: 380V three-phase N — 50hz• Electrical panel position: Right• Control panel nameplate language: ItalianWorktop: 1000 + -50• Bottle entry and exit: on the rightBottle size:• Height: from 174 to 310 rams.Diameter: 58 to 110mm.• Bottle neck diameter: from 16 mm (int.) to 30 mm (ext.) Level variation in the bottle: from 40 min to 75 mmBottle neck he ...

Used filling monoblock SICMEA Cometa 12/5 4500 bph The used filling monoblock SICMEA Cometa 12/5 4500 bph provides a technical solution for filling oil into PET containers. Since Sicmea manufactured this model in 1999 , it ensures a production capacity of 4500 bottles per hour while designing it for packaging formats of 2 L and 5 L. Consequently, it remains a reliable option for industrial bottling lines. Technical features of the Used filling monoblock SICMEA The SICMEA Cometa 12/5 4500 bph uses a volumetric filling system, which ensures precise dosing regardless of the product’s viscosity. Additionally, the monoblock integrates 12 filling valves, and each valve features a fixed nozzle, which guarantees a uniform flow throughout the entire filling cycle. As a result, the machine provides good consistency. Moreover, the capping system handles plastic screw caps efficiently. The 12 capp ...

Used Packaging Monoblock TMG COMBI 3000 BPHTechnical Specifications & Performance DataThis Casepacking Monoblock is engineered for secondary packaging of bottles with integrated erecting, packing, partition inserting, and sealing in a single compact frame. Manufactured by TMG, model COMBI 15 N-DA, this second hand unit is optimized for beverage production and industrial packaging lines that require reliable, continuous operation.Manufacturer: TMGModel: COMBI 15 N-DAYear: 2008Category: Casepacking MonoblockProduction speed: up to 3000 bph (bottles per hour)Carton formats: 6-bottle cartons; 12-bottle cartonsContainer compatibility: Glass bottlesBottle format handled: 1.5LIntegrated sections: carton forming, high-capacity magazine, case packing, automatic partition inserter, top-and-bottom sealingClosure system: adhesive tape (top and bottom)Control system: PLC-managed operationsAdvanced Au ...

CompAir Schraubenkompressor L07-10FS RA2517 Technical Specifications: Item No.: 5129916 Serial No.: L07-10FS Year of Manufacture: 2009 Rated Power: 7.5 kW Motor Speed: rpm Max. operating pressure: 10.0 bar Ambient temperature: °C Tank capacity: L Flow rate: 930 l/min @ bar Price: plus sales tax, ex works from the central warehouse of Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Features: Construction year: 2009 Max. operating pressure [bar]: 10,0 KW: 7,5 Flow rate [l@bar]: 930 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Description Item # 7526 – DOUBLE TWIST WRAPPER for comfit pieces, chocolate creams and sweets with solid or soft filling Manufactured by NAGEMA Model EU7 up to 300 pieces per minute, With appropriate parts would be suitable for product sizes 20 to 60mms long x 13 to 27mms wide x 8 to 20mms high,

Description Item # 9355 - COMPLETE CANDY FACTORY 2000 m² facility (two 1000 m² buildings) The sale includes trademarks, patents, formulations, existing stock, and customer base. Also available are the buildings if a buyer is interested in taking over the complete factory operation. The plant has four production lines: One line can produce 1000 kg/hour of candy, One line 800 kg/hour of Ball Lollipops, One line 300 kg/hour of Flat Lollipops (6g pieces), One line 400 kg/hour of 13g pieces. The machines have been regularly maintained and serviced since their purchase. Available from May 2027 The sale is for the complete plant only; individual units or blocks are not available for purchase. KITCHEN Installation including ATTSU Cookers (year 2000), CONFITECH Cooker (year 2012), RUFFINATI ME70 Mixer (2005), CONFITECH ME70 Mixer (2018), CONFITECH IM70 Kneader (2018) LOLLIPOP FORMING AND WRAPPI ...

Screw compressor CompAir Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

For sale is a powerful CompAir Broomwade screw compressor unit (electric motor incl. compressor stage / screw block). Ideal as a spare part, replacement unit for existing industrial plants or for export/repairers. Technical data (according to nameplate): Power: 90 kW Speed: 1,465 rpm (50 Hz) Voltage / Current: 380/415 V | 191/178 A (star/delta circuit) Year of Make: 1996 Degree of protection / frame: IP 23 | Frame C250MC As shown in the pictures, stored on pallet. Incl. suction tube / flexible hoses and device for fastening.

GAMMA MECCANICA GM 90-35D COMPAC HP (photos taken before reconditioning . see how we recondition [HERE](.germanplast/pages/photo-gallery)), automatic cycle from waste to granule, Material: hard and soft plastics PP, PE, PP/PE, PS, ABS - film reels, Optimal scrap size 40 mm. (ask for [size reduction equipment](.germanplast/listings?q=granulators) if you need), Nominal throughput rate 250-500 kg/h depending on the type of material and feeding rate, Loading belt with metal detector, Reel feding system, Compactor AF-T 105, 90 kW drive, Extruder 90 mm. 36 L/D - 90 kW drive, degassing vacuum pump, BDO 90/140 screen changer 144 mm. Ø screen [ fully automatic screenchanger available on separate request](.germanplast/listings/7610249-used-fimic-ras-325-automatic-sc reenchanger), GMC 50 hydraulic power unit, Cooling tank with TDA 4.0 granulator, C285 granulate centrifuge, Granulate drying tower,  ...

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 1000 L -Operating pressure: 11 bar -Dimensions: 900/1000/H2350 mm -Weight: 322 kg

3000 x 1500mm Brush Tables Automatic loading / unloading Night Train Genius 4000 w fiber

3000 x 1500mm CG 4000w FIBER Night Train Genius Robot part stacking 20 station servo electric

Used OLMOS compact eco2 bottling line, pet & glassTechnical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable transfer throu ...

Incl. refrigerated air dryer from the manufacturer AIRCRAFT.

Key data: 3500 kN, 1100 g/PS, 70 mm

Year of construction 2010 Clamping force: 350 tons. Screw diameter: 70 + 30 mm Shot volume: 1155 cm³ + 113 cm³ Good condition

Convection oven and steamer in one, with stand, The Leventi Combimat DGT is a combi steamer that cooks with steam, hot air or a combination of both. That lets you prepare meat, fish, vegetables and bakery products in a single unit, from gentle steaming to crisp baking., The oven sits on a stainless stand with tray runners and a pull-out work shelf. We did not find a rating plate with the year or capacity., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/leventi-combimat-dgt-combi-steamer/, Type: Combi steamer, Cooking modes: Steam, hot air or combination, Controls: Digital panel with display, Construction: Stainless steel, on stand with tray runners and pull-out shelf

volume capacity: 1,04 m³/min Endpressure: 10 bar Motor speed: 3000 U/min Number of working hours: ca. 9.200 h total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

The Enduro is a joint development of BÖWE SYSTEC and BÖWE BELL + HOWELL, combining proven technologies from both parts of the company: intelligent control and operation as well as modular input components on the one hand, and the proven gripping arm technology, on the other hand. With up to 11,000 envelopings per hour, the Enduro is used in the medium power segment. A wide range of applications, the convenient operation and easy accessibility of all modules are the highlights of the system. This covers the entire processing spectrum from classic invoicing to a wide range of advertising broadcasts. With the COMPACT, BÖWE SYSTEC offers a space-saving, solid yet versatile enveloping system in the performance class up to 7,200 envelons per hour, which can be tailored to a wide range of requirements. Thus, it is equally suitable as an entry-level model for daily post- ...

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold

Cardboard dimensions L min/max 200/650 mm W min/max 150/450 mm, H min/max 120/500 mm Working height 680 mm, format to be adjusted via hand crank, Folding the 4 floor flaps pneumatic operation 6 bar air Power 5-7 cycles /min - product-dependent

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

with 30 filling valves 5stelligem natural corker 5stelligem aluminium screw capper for 28 mm standard caps Direction: left - right

AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned

Qty. 1 Second-hand continuous galvanising line Mfc.: Koryo SanGi, WMS Co., Sumitomo, Dongyang GiGong, Myungshin Mach., Kanto TK, Hitachi, Yuyoung Industry, Cosmo Gas, Hankuk Yugong, Jungwon Mach., Bugong Ind., Hanhyung Industry, SeunJin Mach., Cheongsong Electrics, Jungbu Civil Gas, HK. ENG, Cosmo Construction, KyungJin Construction, Cheonsu Hwankyung Ind., Shinhyeung Built: 1983 Some revamp in 2005 Material: Cold Rolled mild steel FH Strip Width: 650 - 1.250 mm Thickness: 0.2 -1.6 mm Capacity: REF: 27 Ton / Zn 1.2 Ton = 1 Hour HMI Main Control Operation system Zn Coating Wf 80 gm – 220 gm (Both Side) Coil Out Diameter: 2.050 mm Line Speed Max: 150 m/min Entry Section: 195 m/min Process Section: Max. 150 m/min Exit Speed Max.: 195 m/min

We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

- High pressure cleaner PTC Torpedo Eco Compact 16/200 and 21/160 similar but no Dynajet, Oertzen, Falch, DIBO, - Cold water / hot water approx. 95°C, steam 32 bar to 140°C and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Eco Compact 16/200 | 16l/min. at 200bar | Diesel engine: Yanmar L100N 8.5kW - Torpedo Eco Compact 21/160 | 21l/min. at 160bar | Diesel engine: Yanmar L100N 8.5kW - Dimensions and weight without water tank: 1200x930x1080mm, approx. 230kg - Dimensions and weight with 300 l water tank: 2000x1050x1100mm, approx. 300kg - Dimensions and weight with 500 l water tank: 2000x1050x1100mm, approx. 350kg Bhdw89emgf - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hours - Manometer - Pressure regulator - Safe ...

- High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, - Cold water / hot water approx. 95°C and steam 32 bar to 140°C + high pressure steam up to 150°C at 200 bar (only for versions with 250 and 350 bar) and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 hp (high-pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 hp (high pressure steam) | 16l/min. at 350bar | Di ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Built in 2005 Capacity up to 35 pallets/h Film width 500 mm Max diameter 260 mm Core diameter max 76 mm Film thickness 17-30 mµ Equipment infeed belts delivery belt

USED COMTEIFA FT-12 BG CENTRIFUGE REF#: C5613 Used vertical axis basket centrifuge with upper discharge with filtering bag mounted on three feet (with compression straps and springs). Type FT-12-BG manufactured by COMTEIFA. AISI 316 SS wetted parts. General characteristics: Manufactured by COMTEIFA Model FT-12-BG Type Vertical basket top discharge centrifuge Material Stainless steel 316L Variable speed by frequency converter. Total opening All parts in contact with the product are made of AISI 316L stainless steel. Mounting on very strongly sized roller bearings. Bearing house of cast iron. Electric stop brake made by the converter. AISI 316L stainless steel lid with spring-compensated piston movement Technical characteristics: Download Manual above with bag Basket diameter 1,200 mm Height basket 650 mm Max. load 450 kg Useful load 350 dm3 Max. rotationa ...

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...