column used for sale

bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark The data for this ad was creat ...

bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 160 mm spindle taper MT: 4 MK table:: 500 x 420 mm column diameter: 120 mm turning speeds: 85 - 1800 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 0,85 / 1,5 kW weight of the machine ca.: 500 kg. range L-W-H: 965 x 515 x 1920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 0 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark T ...

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: D1209, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mobile column lift, Dimensions: W 1500 x H 2800 x D 1100 mm, Emptying height: 2000 mm, Other: With chain drive

Two fully functional Schmiedl column-mounted slewing cranes are available. 1) Schmiedl crane type 3, year of construction: 1993, load capacity: 1000kg, radius: 5000mm. 2) Schmiedl crane type 3, year of manufacture: 1992, load capacity: 1000kg, radius: 7000mm. On-site inspection is possible.

Stock number: D1211, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lift, Motor: 1,5 kW - 3x220 Volt, Dimensions: W 1200 x H 3400 x D 500 mm, Emptying height: Variable - 2000-2700 mm, Other: Stationary with spindle - Max 300 kg

bore capacity in steel (diameter): 40 mm throat: 325 mm bore stroke: 170 mm table surface area: 730 x 590 mm 0: 130 - 1200 U/min feed: 0,09 - 0,16 - 0,28 mm/U tool taper: MK 4 total power requirement: 1,8 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drill with: Feed 2 gears Left/right rotation Foot switch Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: D913, Column lift, stainless steel,, Scanio type K7, for floor mounting., Fork-lift with bin fork for, lifting and tipping of Vemag bins., Max. tipping height 1900 mm., Material: Stainless steel AISI 304

Stock number: D1088, Column lift, painted edition., 1,1 kW motor, 220/380 Volt,, spindle type., Lifting fork with slot grip,, for lifting and emptying of Vemag wagons., Total height 2850 mm.,, estimated tipping height 1900 mm., Material: Painted edition

Stock number: SF171, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Gel press filter column, Construction: Hanging in tiltable stand, Top: Air controlled press cylinder, Bottom: Product filter, Dimensions: Column - Ø 300 x H 1000 mm , Type: Dan-Process

Column-Mounted Crane DEMAG Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist In good condition Voltage: 380 V Weight: approx 250 kg

Stock number: SF015, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Gel press filter column, Construction: Hanging in tiltable rack, Top: Air driven pressing cylinder, Bottom: Product filter, Dimensions: Ø 200 x H 900 mm, Manufacturer: Dan-Process, Other: Dynamic axial compression (DAC) flow-through bed

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t stroke: 600 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single column hydraulic press MAE type S63SZ SOMasch.Nr. 551277 year of construction approx. 1977Nominal compressive force 63 ton. Pressing force: 50 tons (Practically tested)Projection 320 mmTable surface 850 x 630 mmRam area 1050 x 500 mmRam stroke 500 mmInstallation height max. approx. 730 mmTable height above floor 970 mmTank capacity hydraulics 600 litersDrive power 15 kWNerg connection 380 volts, 50 Hz- Hydraulic drawing cushion under the table with holes through the table top- 2-hand control- Electrical control cabinet damagedSpace requirement L x

Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Single column - eccentric press WEINGARTEN type ERV 40Masch. No. 537 / 65 Year of construction 1965Compressive force 40 ton. Projection 230 mmTable size 570 x 470 mmPlunger area 250 x 200 mmClamping pin hole 40 mmInstallation height max. approx. 520 mmStroke adjustment 8 - 88 mmPlunger adjustment range 63 mmStroke rate 70 strokes per minuteDrive power 3 kWNetz connection 380 volts, 50 Hz- Table height adjustment- Overload protection by crushing plate- Clutch-brake combination by WEINGARTEN friction threaded coupling-

Single column - eccentric press WEINGARTEN type ER 63Masch. No. 52A / 63 Year of construction 1963Pressure capacity 63 ton. Projection 280 mmTable surface 630 x 530 mmAdjustable plunger stroke 8-100 mmPlunger adjustment 63 mmStroke rate 65 strokes / min. Engine power 4 kWNetz connection 380 Volt, 50 Hz- Clutch-brake combination by WEINGARTEN friction threaded clutch- Electrical stroke release via foot switch- Wheel counters- Overload protection by crushing plate- Front crankshafts Support bearingSpace requirement L x W x H 1500

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

Single column hydraulic press SCHULZ type SES 250Masch.Nr. 04.86.3511/3 Year of manufacture 1986Compressive force 25 ton. Retraction force 10 toProjection 360 mmTable surface 600 x 720 mmPlunger area 500 x 500 mmFailure opening in table 100 mmPin hole 40 mmPlunger stroke 400 mmInstallation height max. 600 mmTable height above floor 935 / 775 mmTank capacity hydraulics 380 litresDrive power 7.5 kWNet connection 380 volts, 50 Hz- Fixed stop adjustment in the press cylinder 180 mm- Light barrier

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Single-column eccentric press WEINGARTEN type E 40Masch. No. 643/62 Year of construction 1963Pressure capacity 40 ton. Projection 250 mmTable opening 150 x 80 and 200 mmTable area 560 x 460 mmPlunger area 250 x 200 mmPlunger stroke adjustable 8-88 mmPlunger adjustment 63 mmInstallation height 320 mmPin hole 40 mmStroke rate 100/130 strokes / min. Motor power 2.2 / 3 kWNetz connection 400 volts, 50 HzTable height above floor 840 mm- Clutch-brake combination by WEINGARTEN friction threaded coupling with TDC