column used for sale

Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (11), 111801, Idra, refurbished Refurbished! - The column has been refurbished by Strate and is ready for immediate use. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In ...

Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (12), 211286. Idra, refurbished Refurbished! (top condition) - The column has been refurbished by Strate and is ready for immediate use. - It is still in its original Strate delivery packaging. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Ca ...

Replacement column for IDRA OL1800 + adjustment nut, D260mmx6480mm, (13), Idra, used Second-hand! - Sourced from the spare parts stock of a certified manufacturing facility, - The column is in second-hand condition but is still in working order. - However, the surface of the column already has numerous surface defects. - The column can be used as a spare or for emergencies. - For this reason, this column is being sold at a particularly low price. Special price Replacement column for IDRA OL1800, D260mm x 6480mm, trapezoidal thread TR 260x9mm, approx. 2700kg Includes an adjustment nut, can be easily turned. We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 € : 132.01 € : 25 mm : MK 3 : 250 mm : 245 - 4000 U/min : 0,7 / 1,3 kW kW : M18 : 400 mm : 655 mm : 1900 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 € : 173.12 € : 30 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : 380 mm : 600 mm : 2060 mm : 260 kg : 100 mm : 170 - 660 mm : 1.216 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 € : 209.86 € : 35 mm : MK 4 : 300 mm : 132-194-277-319-466-666-8 U/min : 1.5 kW : M27 : 755 mm : 480 mm : 2205 mm : 385 kg : 125 mm : 90 - 890 mm : 1250 mm : 400 x 420 mm : 150 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front Depth scale and adjustable depth stop Thermomagnetic switch Emergency STOP push button Spindle reversing switch Worklight Fixed table Safety drill guard with microswitch CE mark OPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-sl ...

: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 € : 257.84 € : 1 : 30 mm : MK 3 : 280 mm : Stufe 1: 125 - 4000, Stuf U/min : 0,9 / 1,45 kW kW : M20 : 820 mm : 520 mm : 1900 mm : 320 kg : 0 - 300 mm/U : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off, programma ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 6939.26 € : 133.93 € : 20 mm : MK 2 : 260 mm : 30 - 3000 U/min : 1,5 kW : M12 : 430 mm : 715 mm : 1800 mm : 290 kg : 100 mm : 110 mm : 230 - 850 mm : 420 x 340 mm Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7035.46 € : 135.78 € : 25 mm : MK 3 : 280 mm : 125 - 4000 (2 Stufen) U/min : 0,9 / 1,45 kW : M20 : 520 mm : 820 mm : 1900 mm : 275 kg : 125 mm : 110 mm : 240 - 790 mm : 420 x 340 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS (PRICES ON REQUEST): Drill package (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 8144.6 € : 157.19 € : 25 mm : MK 3 : 280 mm : 125 - 4000 (2 Stufen) U/min : 0,9 / 1,45 kW : M20 : 520 mm : 820 mm : 1900 mm : 275 kg : 125 mm : 110 mm : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Digital drilling depth and speed display Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS: Drill package (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO BT 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 € : 296.47 € : 40 mm : MK 4 : 300 mm : 1,5 / 3,0 kW : M30 : 610 mm : 850 mm : 1920 mm : 440 kg : 0 - 300 mm/U : 160 mm : 125 mm : 150 - 700 mm : 590 x 450 mm Display with the following functions: - Selection of operating mode: manual drilling / drilling with feed / tapping - Spindle speed - Feed rate - Zero point setting - Drilling depth - Piece counter - Chip breaking mode - Jump switch mode (for efficient drilling of square tubes) - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode Drilling capacity / normal drilling performance 35/40 (in E335/ST60) Automatic feed Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protecti ...

pressure: 315 t stroke: 20-150 mm ram stroke - adjustable min/max: 20 - 150 mm table-size: 1780 x 1250 mm ram surface: 1500 x 1000 mm total power requirement: 75 kW weight of the machine ca.: 46 t - Installation height with max. stroke at bottom adjustment at top 500 mm - Passageway in the table : 1200 x 300 mm - Milling in the table : 1300 x 400 x 80 mm - Infinitely variable stroke rate : 20 120 Hübe min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALZMETALL AX 4 / SV Säulenbohrmaschine 3KW Hersteller: Alzmetall Typ: AX 4 / SV Zustand: Vorführmaschine / unbenutzt Baujahr: 2024 Bohrvermögen Stahl E335 (St 60) 55 mm Gewindeschneiden Stahl E335 (St 60) M 42 Guss EN-GJL-200 M 56 Kurzspindel MK 4 Spindelhub 140 mm Nutzbare Ausladung 300 mm Säulendurchmesser 145 mm Maschinentisch, nutzbare Auflage 615 x 430 mm Abstand Spindel-Tisch min./max. 150/735 mm T-Nuten, Anzahl x Breite x Abstand 2 x 14 x 224 mm Vorschub 0,1 + 0,3 mm/U Maschinenhöhe ca.1850 mm Nettogewicht ca.380 kg Antrieb stufenlos Motor 1500 U/min Leistungn 3,0 kW Spindeldrehzahl U/min 70-2400 Serienmäßige Ausrüstung: Hauptschalter mit Motorschutzschalter abschließbar Pilzdrucktaster (verrastend) für NOT-AUS Drehzahlverstellung stufenlos Drehzahlanzeige Digital Vorschubüberlastsicherung Schutzart IP 54 Spindelschutz mit elektrischer Absi ...

met spanentransportband Longitudinal travel X-axe: 1050 mm Crosstravel Y -axe: 560 mm Travel Z-axe (Height): 560 mm Dimensions clamping space - table: 1400 x 550 mm Power on spindle: 9 kW Max speedrange: 10 > 6000 rpm Control: Fanuc O-M ACCESSORIES & TOOLING: toolchanger, 32 positions

Lg.Nr. 25046 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable - Adjustable - Level 1 65 - 240 rpm - 130 - 480 rpm - Level 2 240 - 875 rpm - 480 - 1750 rpm - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Table with reversible function with fixed machine vice - Table height adjustment via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 300 kg - with: - Keyless chuck 1-13 mm

Jessinegg + Urban, Stroke 300, Lift: 300, table 450x370, 1300kg

travelling column machining center, year 2005. Used machine. More info & price on IndustrialBuyer.

travelling column machining center, year 2000. Used machine. More info & price on IndustrialBuyer.

x-travel: 12000 mm y-travel: 3600 mm z-travel: 1600 mm spindle turning speed - stepless: 5000 U/min spindle motor: 34 kW table-size: 13000 x 2500 mm feeds longditudinal/cross/vertical: 15000 mm/min rapid motion -longitudinal/cross/vertical: 30 m/min no. of tools in the magazine: 100 Stück control: HEIDENHAIN TNC 640 total power requirement: 60 kW weight of the machine ca.: 88 t - CNC Control Heidenhain TNC 640 - Universal Milling Head, Automatic A/B Axis, MILLESIMAL POSITIONING - ATC for 100 tools (ISO 50) - Rotary Table 1500X1500mm, 15t - MOBILE WORKING PLATFORM - PERIMETER FENCES - STATIC RTCP OF ROTATING TABLES - STATIC RTCP IN THE SPACE - AUTOCAL - Vibration Detection Probe - Green Mode Function - Chip Conveyor - Laser Tool Setter - Coolant with Paper Band Filter (High-Pressure 40bar) - Touich Probe - Portable Handwheel Power On: 12400h, Machine ON: 6300h, Program Run: 3950h, Spindl ...

Column Drill

bore capacity in steel (diameter): 36.0 mm bore capacity in cast iron: 45.0 mm throat: 300 mm bore stroke: 160 mm : 4 speeds: 65 - 2000 U/min column diameter: 145 mm table-size: 615 x 460 mm feed: 0.1 / 0.2 / 0.3 mm/U total power requirement: 1.75 / 2.5 kW weight: 440 kg dimensions: 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features: - Robust column drill press (V-belt drive) - Electromagnetic feed clutch = spindle feed with overload protection and electric cross-handle control - mushroom-head pushbutton (latching) for EMERGENCY STOP located on the front panel - continuously variable speed control - clockwise rotation of the drill spindle - Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable - Separate coolant system, with reservoir - Operating instructions in  ...

Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alzmetall AX3 SV Säulenbohrmaschine Hersteller: Alzmetall Typ: AX3SV Baujahr: 1996 Zustand: gut, gebraucht Drehzahlbereich: 160 ? 2250 U/min Bohrvermögen (St60) 40 mm Futter-/ Werkzeugaufnahme MK 3 Spindelhub 120 mm Ausladung 293 mm Säulendurchmesser 115 mm Abstand Spindel-Tisch min./max. 117 / 701 mm Vorschub 0,1 + 0,2 mm/U Nettogewicht ca.270 kg Sonderausstattung: ? Automatischer Vorschub ? Spindelschutz

Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable 80 - 1170 rpm - 2 feeds 0.1 / 0.2 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - Right – Counterclockwise rotation - Keyless chuck 1-13 - Lighting

Offer 26245 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil capacity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 2980 x D 1850 mm - Weight approx. 4600 kg

incl. Machine vice, jaw width: approx. 135 mm

Drilling Ø: 35/40 mm Spindle holder: MK 3 Drilling stroke: 140 mm Projection: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 285 kg Space requirement: 900 x 550 x 1830 mm

There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible.

Drilling Ø: 31.75 mm Spindle holder: MK 3 Speeds stepless. adjustable: 180 - 2100 rpm Projection: 280 mm Table size: 350 x 450 mm Large distance between table and quill: 700 mm Drive motor: 380 V, 0.9/1.3 kW Weight: 270 kg

travelling column machining center, year 2000, CNC 840. Used machine. More info & price on IndustrialBuyer.

For sale is a MAXION UNIMAX column drill, Made in Germany, in a heavy and robust industrial design. The machine is ideal for metalworking, locksmithing, mechanical engineering, maintenance as well as workshop and production operations. Technical data / equipment Manufacturer: MAXION Series: UNIMAX Production: Made in Germany Speed range: approx. 80–3,200 rpm Speed levels / ranges according to the machine shield: 80–720 rpm 160–1,460 rpm 180–1,600 rpm 360–3,200 rpm Pulleys: Ø 60 / Ø 140 mm according to the shift diagram Manual quill feed via large 3-arm hand lever Quick-release/drill chuck Solid height-adjustable work table Machine vise included Emergency stop switch Footswitch Solid machine stand with base plate CE marking The machine is in a used, age- and use-typical condition. Signs of wear and dirt are present and documented in the pictures.  ...

Manufacturer: SIDEROS Model: SYNCROLIFT SLC 25 Year: 2023 Condition: Used Stock Number: 9537 Maximum load capacity: 2500 kg

pressure: - t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MODEL SL-150 Power t 150 Motor power kw 4 Piston stroke mm 250 Working speed mm/s 3.1 Return speed mm/s 4 Head displacement mm 1,000 Front light mm 1,500 Side light mm 340 Max. vertical span mm 955 Bed light mm 405 Total front mm 2,150 Total side mm 1.180 Total height mm 2.805 Weight kg 2.350 STANDARD DESCRIPTION: The S-series hydraulic presses are specially designed for extraction, casing and straightening work. They work with a hydraulic pressure of less than 320 bar, which guarantees greater durability of the entire hydraulic system. STRUCTURE: They consist of an electro-welded structure with four uprights with open sides. They are equipped with a movable bed that allows it to be positioned at different heights. The fixing is done by means of two pins located at the bottom of the bed. The raising and lowering system is carried out by means of cha ...

STANDARD FEATURES: Power 50 t Motor power 1.5 kw Working speed 2.25 mm/s Return speed 4.50 mm/s Maximum pressure 500 bar Piston stroke 150 mm Spindle stroke 120 mm Front light 800 mm Side light 160 mm Max. vertical span 1,020 mm Bed light 205 mm Total front 1,090mm Total side 900 mm Total height 2,000 mm Weight 295 Kg. Specially designed for extraction, bushing, straightening, etc. The hydraulic presses of the S series consist of a four-pillar electro-welded structure with open sides. They have a movable base that allows it to be positioned at different heights. The fixing is by means of two pins located at the bottom of the bed. The raising and lowering system is by means of chains driven by the cylinder of the press. SD Models: are fixed head. Double-acting cylinder with chrome-plated plunger and anti-wear guides. It is equipped with a removab ...

TJF-GARNET SPECIAL HYDRAULIC PRESS: Hydraulic press with double upright equipped with two side cylinders joined by a plate for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and stalling of the rotor shaft, as well as the extraction of shafts in case of repair. It has a removable table for the stacking and handling of rotors and stators. MAIN CYLINDERS 150 TN.  2 hydraulic cylinders of 75 Tn. of power each, with a stroke of 1200 mm joined by a grooved plate, with a central bore of 250 mm in diameter.  Maximum useful height cylinder plate of 1550 mm.  Minimum useful height cylinder plate of 350 mm. ABSTRACTION CYLINDER  1 central cylinder of 80 Tn of power with 1200 mm stroke.  Prepared to adapt abstraction clamp, end of threaded stem to M 35,150 x 40 in length.  Maximum useful height ...

bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 145 mm taper MK: 3 MK table-size: 540 x 480 mm feeds: 0,08 bis 0,32 mm/U turning speeds: 180 - 2000 U/min total power requirement: 3,0 KW weight of the machine ca.: 0,9 t dimensions: 1,2 x 0,8 x 2,4 m Column drilling machine with: - Power feed - Thread-cutting attachment - Coolant pump - Machine light - Incl. machine vice - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column drill Ixion BS 30GL with reinforced motor. Year of construction: 1998. lead screw included. Also included are two drill masters, each with three threaded spindles, as well as an additional spare board.

Key data: 400 t

The following machines are involved: Müller-Weingarten ZE 400-16.19, 400 t double column press, approx. 1,600 × 1,300 × 1,400 mm, year of construction 1963, conversion 1991. Müller-Weingarten ZE 400-20.13.2, 400 t double column press, approx. 2,000 × 1,300 × 1,200 mm, year of construction 1977, conversion 1991.

bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 180 mm table surface area: 765 x 620 mm 0: 130 - 1750 U/min feed: 0,1 - 0,2 - 0,3 mm/U tool taper: MK 4 total power requirement: 3,0 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drilling machine with: Power feed 2 gear stages Tapping attachment Footswitch Machine light Coolant system Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pillar slewing crane Manufacturer: Mechanik Taucha Fördertechnik GmbH Load capacity: 1,600 kg Projection (A): 4,000 mm Total height (H1): 3,500 mm Hook height (H2): 2,600 mm Swivel range: approx. 270° Chain hoist Manufacturer: LIFTKET Electric hoist Cat landing gear electric Voltage: 400V Multi-stage pendant switch with emergency stop

Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: GSX 2000-4/2.7/1 Load capacity: 2,000 kg Projection (A): 3,000 mm Total height (H1): 2,900 mm Hook height (H2): 1,800 mm Year of construction: 2004 Swivel version: manual Electric chain hoist Manufacturer: LIFTKET Load capacity: 2,000 kg Lifting speed: 2.5 / 10.0 m/min Lifting height: approx. 5 m Voltage: 400V Year of manufacture chain hoist: 2006

bore capacity in steel (diameter): . mm throat: 368 mm bore stroke: . mm feed: 0,1-6,18 m/min table surface area: 560x470 mm Thread-cutting device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4500 mm y-travel: 1700 mm z-travel: 1000 mm TABLE: - table surface (left-right): 6100 mm - table surface (front-back): 1000 mm - workpiece load (max): 8000 kg WORKING SPINDLE / HEAD: - spindle type: Schwenkkopf - tilting range: 1 / 3 ° - spindle revolutions (min): 15 U/min - spindle revolutions (max): 3000 U/min - tool fixture: ISO SK 50 - drive power (max): 30 kW AXIS DRIVES: - feed velocity (min): - mm/min - feed velocity (max): 20000 mm/min Control: NUM 750 total power requirement: - kW weight of the machine ca.: 28 t equipped with: - CNC Control NUM 750 - Universal indexing head 1°x 3° - ATC 61-fold - CE Sign The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mm throat: 285 mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6000 mm, 1250 mm, 2500 mm

Travelling column milling machine Manufacturer: Zayer Type 30KCU6000 AR Year of manufacture 2005 Control Heidenhain iTNC530 Travel X 6000 Z 2500 Y 1250 40 Compartment Tool Changer Tool holder SK50 Electronic Handwheel HR 510 Machine is in a used 100% working condition. It is sold from the Homburg Saar site, and a 20t overhead crane is available for dismantling.

Key data: 70 mm

Column Drill Make: IBARMIA Type: B 70 Drilling capacity: Ø 70 Gear Drill -with drill feed -Coolant pump in the base -Drilling depth shutdown -Spindle mount MK-5 -Column diameter: Ø 240 mm -Drill ejection Height: 2550 mm Depth: 940 mm Width: 620 mm Table size: 660 x 780 mm Weight: approx. 1,300 kg with machine vice, mechanical-hydraulic Make: HILMA Wingspan: adjustable No guarantee, no return, no warranty Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.

- Load capacity: 250 kg. - Maximum hoist lift: 3.5 m. - Power supply 380 V, three-phase, 50 Hz. - Two lifting speeds: 2.2 - 8.7 m/min. - IP54 protection. - Distance to the axle: 3,500 mm. - Height of the structure: 3,000 mm. - Metal structure included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-12

T-slot clamping surface: 600x450 mm, max. speed: 3000 rpm