cold used for sale

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Cold room lock, cold storage lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock, unused, original packaging -Type: 3.16.416.2 Links -Number: 8x door locks available -Price: per piece -Cardboard dimensions: 260/150/H40 mm -Weight: 1.1 kg/pc.

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 4x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Cold room lock, cold room lock, mortise snail lock, cold room door lock -Manufacturer: STUV, cold storage lock unused Ovp -Type: 3.16.416.1 KRT Lock V2A -Number: 5x door lock available -Price: per piece -Carton dimensions: 260/150/H40 mm -Weight: 1.1 kg/piece

Vice for cold circular saw, saw vice -Vise: from a cold circular saw manufacturer FCB type OMP 06 -Dimensions: see photos -Dimensions: 700/200/H200 mm -Weight: 28kg

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

Chiller Green Box Twin 61 2006 year Price 4.500 Euro probably damaged evaporator // controller - o.k. // two compressor - o.k.

Seven Cold Pilger Mills From European Seamless Tube production facility in France. These well-maintained (7x) Cold Pilger Mills from Seamless Tube Plant are now available for individual purchase. Featuring top names like Mannesmann Meer and DMS Montbard Whether you need just one machine to complement your existing line or multiple units, you can now acquire these high-quality Pilger Mills separately, no longer restricted to the full plant package. Learn More WhatsApp +31 6 51199492 1. Pilger Mill 4½" N°2 (Lot 2010) 2003 | Mannesmann Meer | 50–102 mm | 349 kW | ~100 tubes/hour | Modern Schneider PLC + Double Rotation rotation system. 2. Pilger Mill 4½" N°1 (Lot 2020) Mannesmann Meer | 29.5–50 mm | 310 kW | ~130 tubes/hour | Recently refurbished stand assembly. 3. Pilger Mill LP4 (Lot 2070) DMS Montbard | 50–102 mm | 649 kW | ~95 tubes/ ...

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

The facility includes a comprehensive range of production and support equipment, including: 4 Cold Rolling Mills (4Hi & 2Hi) – including tandem rolling lines with speeds up to 500 m/min, processing strip widths from 4–100 mm and thicknesses from 0.4–4.5 mm. 9 Annealing Furnace Units – stretch and batch furnaces operating with nitrogen and hydrogen atmospheres, with temperatures up to 1,000°C. Inspection, NDT & Finishing Lines – including eddy current inspection, surface grinding, shaving, and coil-to-bundle conversion. 2 CRM Work Roll Grinders (WMW, Germany) – together with blanking lines capable of producing up to 240 hacksaw blanks per minute. Laboratory & Auxiliary Equipment – including tensile testing equipment, optical microscopes, compressors, punch presses, and other supporting machinery. In combination lot, but also available for individual pu ...

Make: GÜNTNER Type: S-GVH 101 B/3 S Built: 1995 Power: 230kW Volume: 142 litres With subcooler Type GVV 066 C/1 L Volume subcooler: 20.1 liters With 3 fan condenser (1000mm) + 1 fan subcooler (x650mm) 3 pieces Available Price on request Contact details can be found under Contact

Net cooling capacity: 50 kW Operating Weight:435kg Refrigerant: R410a

Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible.

GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW

Make: THERMOKEY Type: 46 W2 54 3 7000 21 41 C T Year built: 2010 Power: Volume: 242.6 litres Pressure: 10 Bar Max Temperature: +120 °C Min. Temperature: -40 °C Fan: x 900mm 4 pieces Available Price on request Contact details can be found under Contact

Slicer Bizerba Year of construction 2000 Price on request

Only the cold circular saw with the 2m roller conveyor and the 2m stop including stand is up for auction. All other items to be seen in the picture are not part of the auction (control cabinet and others are not included!). Heavy, indestructible industrial cold circular saw of the quality brand Wahlen (Eschweiler), model S-WK II (steel version, built on the heavy WK III cast body). The machine is characterized by maximum freedom from vibration and torsional rigidity. The saw blade is guided from top to bottom by a solid hand lever (cross-cut principle). Thanks to the pole-switchable premium gear motor from EMOD and the integrated coolant device, it is perfect for locksmiths and metal construction for precise cutting of steel, stainless steel and profiles. Technical details & equipment: Manufacturer: Wahlen GmbH & Co. Model No.: S-WKII (Heavy Steel Cold Circular Saw Motor: EMOD pol ...

Make: YORK Type: YCSA-150-TP-380T BLUE FIN Year built: 2010 Power: 155kW Coolant: R410A 4 pieces Copeland Scroll compressors 4 pieces of fans 2 circles With WILO circulation pump 1 condenser is leaking! Price on request Contact details can be found under Contact

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight:22 t

saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm

Make: YORK Type: YCAA B 210 LN Power: 149kW Refrigerant: R407C 4 compressors Make: YORK Type: 015-02874-992 Pressure: 25 Bar Max temperature: 63°C Min. Temperature: -35°C Price on request Contact details can be found under Contact

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KW Set Lufcooled AERMEC Techn. data Aermec: • Type NRA 1500 • Cooling capacity: 390 kW • Y.O.M.: 2004; • 6 x fans; 6 x Danfoss Scroll Compressor • R 407 c; 2 circles a 44 kg; • Dimensions: B 2.2 x L 4.3 x H 2.6 m plant ran until the last, was serviced until 2019; was used for indoor air conditioning.

saw blade diameter: 400 x 50 mm cutting diameter: 130 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 115 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 250 x 85 mm capacity 45 degrees: flat: 160 x 70 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 380 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts, Price: € 290.00 The data for this ad was created with ModulMWS - the software solution of  ...

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315/350 mm capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 160x90 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 90 mm capacity 60 degrees: flat: 80x100 mm total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,6 x 1,22 x 1,06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: 0,8 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15 - 90 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 85 mm capacity 60 degrees: flat: 90 x 80 mm clamping range: 130 mm turning speeds: 30 / 60 U/min dimensions of saw-blade: 350 x 32 x 2,5 mm total power requirement: 1,1 / 2,2 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1200 x 860 x 900 m Special price: instead of 3997, -EUR now 3399, -EUR Manual miter saw for miter cuts from 45 ° right to 45 ° left, with high sawing performance. Made of robust cast iron, practical and safe for every cut. Basic equipment: externally adjustable coupling Locking device with a vice Can be moved on a prismatic guide with an adjustable bar Fixed clamps of the vice with axial adjustment for clamping the workpiece in the immediate vicinity ...

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm : 180 x 100 mm Working height: 925 mm saw blade turning speeds: 15 - 150 U/min total power requirement: 5,5 kW weight of the machine ca.: 0,615 t dimensions of the machine ca.: 1,4 x 1,4 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

saw blade diameter: 450/500 mm cutting diameter: mm stroke: mm total power requirement: 3,6 kW weight of the machine ca.: 1130 t dimensions of the machine ca.: m - Circular saw - semiautomatic - hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Trane chiller mod.GN400E72D2XDDXX1, 102 KW, YOC 2006, refrigerant 407C, with pump and glycol tank below. In very good condition, little operating hour only 2124 hours.

The SBS 330 refrigeration system was set up for a long-term test and is now for sale. Cooling capacity 320 KW at 7/12°C and an ambient temperature of 35°C Includes 4 scroll compressors, 2 refrigeration circuits

air-cooled chiller, 3.6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suited for smaller cold water supplies of process applications. Compact design, simple control.

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

The refrigeration system was used by us for 1 year in the rental. The chiller has 2 refrigeration circuits and fan control. the cooling capacity is 240kW at 7/12°C and 35°C ambient temperature. the refrigerant used is R140a

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking