cold storage used for sale

Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data Manufacturer: KOSME Model: F ...

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2017 Machine with particularly few sled lifts! Total number of sled lifts: 7,075,699 Machine has been overhauled by a specialist Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Slicer Treif -Model: DIVIDER Orbital+ -Power: 7.5 kW -Year of manufacture: 2014 -Capacity: up to 1200 cuts/min -Max. slice thickness: 0.5–25 mm -Max. product length: 850 mm -Belt width: 420 mm -Includes a knife sharpener -Knife sharpener model: HS DIVIDER ORBITAL -Outer dimensions of the sharpener: 580 x 640 x 400 mm -Sharpener year of manufacture: 2015 -Power supply: 380V 3Ph 50Hz -Suitable for slicing: meat, cheese, fish -Made of stainless steel -Outer dimensions: 3200 x 1200 x 2350 mm -Weight: 850 kg -Condition: Used in very good condition, ready to work

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg

Semi-automatic/fully automatic Cutting thickness 0.5 - 8mm, (without offshoots up to 24mm) ideal for meat or sausage/cheese Knife diameter 330mm with automatic acceptance of the section dig. Control Material to be cut: max. 250 x 120 mm with base frame

Fully automatic slicer Used machine with digital control Knife size: 330 mm with automatic filing, programmable, Stepless cutting thickness adjustment: 0.5mm to 10mm Carriage for 400 mm clamping length 180cm width with base frame

equipped with 16 sandwich panels; Dim. approx. 1200x3150 mm; 5 sandwich panels; Dim. approx. 1200x7200 mm; thickness approx. 140 mm; incl. (2x) evaporator with 4 fans; (1x) refrigeration compressor and (1x) dismantled overhead door; width approx. 6500 mm Auction-ID: A1-50542-18

Euro Cold ACO-LP 45t CP2-B SL Industrial Liquid Cooler/Process Chiller (2015). Powerful, compact cooling unit (400V / approx. 2 kW) designed for precise liquid cooling of CNC spindles, laser systems, hydraulics or laboratory processes, among others. Operates on R407C refrigerant. Auction-ID: A1-50846-16

Used HRS tubular skid-mounted pasteurizer cold-fill 3000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems pasteurizer is a stainless-steel packaged process skid designed for controlled thermal treatment within beverage production and industrial packaging operations. Pasteurizers are used to apply a defined heating and cooling process that supports product stability and consistent processing before downstream filling, labeling, capping, or secondary packaging.Manufacturer: HRS Process SystemsModel: 1 x 20 M170 - 63/100 8000Configuration: SKID - 1Year: 2018Operating hours: 18,939Construction: Stainless-steel process skid assemblyAdvanced Automation & Control SystemsThe machine is supplied as a process skid, providing a compact arrangement for thermal processing equipment and associated process connections. A pasteurizer installation is typically integrated ...

Used HRS pasteurizer cold-fill 8000 LPH - Year 2020Technical Specifications & Performance DataThis HRS cold fill pasteurizer unit is designed for thermal treatment within beverage production and industrial packaging processes. Built for cold-fill applications, it provides a controlled pasteurization stage before or during integration with a used bottling line. The unit has a stated processing capacity of 8000 LPH and was manufactured in 2020.Manufacturer: HRSEquipment: Cold Fill Pasteurizer Unit IICapacity: 8000 LPHYear: 2020Electrical supply: 420V / 50HzConfiguration: 1X8 - MI120 - 8916 - 8000 - 316/316Additional configuration lines: 1X12 - MI120 - 8916 - 8000 - 316/316; 1X1 - K50 (2P) - 219/16 - 750 - 304/316Construction materials indicated: 316/316 and 304/316 stainless steel gradesAdvanced Automation & Control SystemsThe pasteurizer is configured for a 420V, 50Hz electrical supply. I ...

3x Used Schott KL 1500 cold light source Voltage: 220-240 (50/60Hz) Auction-ID: A1-50936-214

Dimensions inside dimensions Length: 11m Width: 5m Height 3m Including: - condensing unit -Compressor motor -Eco evaporator -Lighting Cooling power 10KW Automatic defrost system 380V / 16A Already dismantled by the company of purchase Everything is complete and present Auction-ID: A3-46142-19528

10 machines in stock EISELE high-performance circular sawing machine VMS 350 das ORIGINAL - made in Weilheim/Germany Equipped to accommodate saw blades up to 350 mm in diameter. Min. / max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 X 8 / 120 x 100 Smaller cross-sections on request. With pole-switchable three-phase motor, 1.4/1.9 kW, including clamping device to the left and right of the saw blade, stationary base frame with built-in coolant device and chip drawer, material support height 900 mm. Sawing machine is designed for voltage mains 400 V / 50 Hz. (3LNPE400V/50Hz). Spare parts supply for 10 years. Standard version with 17/34 min-1 or 34/68 min-1 Standard version, models differ in the type of cooling

Olympus CLE-4U – Endoscopic Cold Light Source Manufacturer: Olympus Model: CLE-4U Features: Cool Light, Auto Exposure Origin: Made in Japan Power Supply: 220V – 50/60Hz Condition: Good overall – to be repaired: does not turn on, sold as is Auction-ID: A1-51275-2

Coldway Alcatherm Coolsplit – Insulated transport container Manufacturer: Coldway Model: Alcatherm Coolsplit Use: Transport of temperature-sensitive products (blood, pharmaceuticals, laboratory) Operation: Stand-alone thermochemical battery, without power supply in use; recharge in less than 8 hours Condition: Good condition, functionally tested Auction-ID: A1-51275-9

saw blade diameter: 315 x 2,5 x 32 mm cutting diameter: 100 mm cutting speed: 33/66 m/min height of material-table: 900 mm total power requirement: 1,8 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,05 x 0,50 x 1,80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Incl. accessories and pallet, pack size (LxWxH) approx.: 800x1200x960 mm Auction-ID: A7-51326-108

Saw blade diameter 315 mm Cutting diameter 80 mm Speed 1450 rpm Table 450 x 400 mm Mitre 45°/45° Connection voltage 400 volts Total power requirement 1.2 kW Machine weight approx. 0.2 t Space requirement approx. 0.9 x 0.9 x 1.4 m Auction-ID: A7-51438-450

Manual cold circular saw with: - Machine base - Support rail 1500mm Saw blade diameter 275 mm Cutting range at 90 degrees: around 80 mm Cutting range at 90 degrees: square 70 mm Cutting range at 90 degrees: flat 100 x 60 mm Cutting range at 45 degrees: around 70 mm Cutting range at 45 degrees: square 60 mm Cutting range at 60 degrees: flat 80 x 50 mm Clamping range 110 mm Speed 45 / 90 rpm Total power requirement 0.5 kW Machine weight approx. 0.07 t Dimensions approx. 900 x 700 x 1600 m Condition: functional Auction-ID: A7-51438-483

Cold circular saw with: Saw blade diameter max. 350 mm Cutting range: round 110 mm Cutting range: square 100 mm 2 saw blade speeds Machine weight approx. 0.65 t Dimensions approx. 0.8 x 1.0 x 1.85 m Condition: untested (6) Auction-ID: A7-51438-531

Cold circular saw - machine light - coolant system Saw blade diameter 300 mm Cutting diameter 90 mm Speed 40/80 rpm Total power requirement 1.5 kW Machine weight approx. 350 kg Dimensions approx. 0.9 x 0.8 x 1.5 m Condition: functional Auction-ID: A7-51438-453

Semi-automatic long-cut cold circular saw: - with mitre adjustment left 50°, right 60° - digital cutting angle display - feed speed hydraulically controllable - hydraulic workpiece clamping - 4 pcs replacement saw blades saw blade diameter 510 mm cutting diameter 150 mm cutting range at 90 degrees: flat 450 x 150 mm cutting range at 90 degrees: square 150 mm speed 29 / 58 m/min.total power requirement 4.2 kW weight 1.55 t dimensions L-W-H 1.8 x 1.7 x 1.7 mm Condition: functional Auction-ID: A7-51438-460

Cold circular saw mitre 45 degrees on one side Saw blade diameter 300 mm Cutting diameter 100 mm Saw blade speeds 40 / 80 rpm Cutting range at 90 degrees: square 90 mm Cutting range at 90 degrees: around 100 mm Total power requirement 1.5 kW Machine weight approx. 0.4 t Condition: functional Auction-ID: A7-51438-608

The assembly saw with elaborate standard equipment and a large cutting range · For mitre cuts on the left up to 45 °· For sawing steel, stainless steel and, to a limited extent, aluminium profiles · Automatic cooling directly on the saw blade · Safety switch 24 V in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool incl. saw blade HSS 250x2.0x32mm, 128 Z/ZT 6 +NL Optional: Machine base type 20505 (125,-EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: around 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting area at 45 degrees: around 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t Condition: never used / new (5) Auction-ID: A7-51438-555

Saw blade diameter 315 mm Cutting diameter 100 mm Cutting speed 40 / 80 rpm Total power requirement 1.2 kW Machine weight approx. 0.3 t Space requirement approx. 0.8 x 0.6 x 1.65 m Condition: functional Auction-ID: A7-51438-406

saw blade diameter: 300 mm turning speeds: 17,5/35 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sinus Medical Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-51471-114

CRYOIC MEDICA CRYO + Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-51471-118

turning speeds: 15/30 U/min saw blade diameter: max. Ø 370 mm Vice opening: 180 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100x100 mm capacity 90 degrees: flat: 180x100 mm : 105 mm : 100x100 mm : 130x100 mm : 120 mm : 100x100 mm : 130x100 mm weight of the machine ca.: 400 kg dimensions of the machine ca.: 1100x900x1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lot of 7 cold chisels – New Lot composed of 7 new cold chisels. Important information – to be read before bidding Goods from discontinued series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her appreciation of the lot. Auction-ID: A1-51086-74

With cooler type: Cool71 U40 and wire feeder type: Expert Drive 4. Auction-ID: A1-51529-57

Key data: 315 mm, 80 mm, 100 mm

Very well-preserved circular saw with two speeds and adjustment to 45°

Brand: Jansen Model: TBF-180 Year: 2021 Dimensions indicated: 203 × 95 × 100 cm Indicated weight: 380 kg Three-point hitch PTO drive Supplied with gimbal Auction-ID: A3-46114-35363

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

Big Ass Battery Test Unit The battery storage system has a capacity of 195kWh. It is about 2 years old with very few operating hours. The whole thing comes from a development/test environment and is ideal for energy storage projects, electric vehicles Charging technology, prototyping or parts Extraction. It has just been serviced by Big Ass Battery, including protocol and is therefore immediately ready for use.

Vertical sheet metal storage, drawer sorting storage for sheet metal, Hegla, 10 compartments for sheet metal 1.50m x 3m, – used - : Price from location: 4.500.-€ (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of construction 03/2010 Maximum adjustment length 3,000 mm Maximum adjustment height 1,500 mm Number of compartments:10 compartments Load capacity 500kg per drawer (10 x 500kg) Max. loading height: 1,500mm Total dimensions LxWxH: 3,250mm x 1,590mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim

Equipped with storage tent / storage shelter girth truss/tube system galvanized both ends a door Color: White including assembly manual unused in metal case (transport dimensions 293x75x98 cm) Auction-ID: A1-47368-1002

Equipped with storage tent / storage shelter Double truss/tube system galvanized both ends a door Color: White including assembly manual unused in metal case (transport dimensions 315x110x98 cm) Auction-ID: A1-47368-1001

Equipped with storage tent / storage shelter Double truss/tube system galvanized both ends a door Color: White including assembly manual unused in metal case (transport dimensions 315x110x98 cm) Auction-ID: A1-47451-1099

Equipped with storage tent / storage shelter; girth truss/tube system; galvanized; both ends a door; color white; including assembly manual; unused in 2 metal boxes (transport dimensions box 1 295x75x88 cm, box 2 295x75x88 cm) Auction-ID: A1-47367-1096

Equipped with storage tent / storage shelter; double truss/tube system; galvanized; both ends a door; color white; including assembly manual; unused in metal box (transport dimensions 315x110x150 cm) Auction-ID: A1-47367-1095

Lot comprising multiple welded steel storage/transport frames, apparently previously used for supporting, storing and handling stone slabs or other heavy materials. Construction/features: Heavy welded steel construction Rectangular base frames with transverse supports Upright A-frame / support structures Diagonal reinforcement bracing Various frame configurations and sizes Raised legs for clearance from the ground Several frames fitted with long support rails and/or locating posts Suitable for industrial storage or material-handling applications, subject to inspection and verification of load capacity Auction-ID: A1-51282-137

5 heavy-duty steel storage stands, previously used for storing granite and other heavy stone components. Robust welded steel construction with multiple horizontal tubular support arms, suitable for storage of long and heavy materials such as stone slabs, beams, profiles or similar workshop stock. Auction-ID: A1-51282-140

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Cat. No. 10-1765 in very good condition With manhole round top 400 mm With vent dome DN 300 With CIP cleaning With filling nozzle DN 50 With threaded connection connector DN 50 With level indicator with bar and scale With agitator on the side With conical bottom m.Remaining outlet DN 50 Height-adjustable on 4 calotte feet Dimensions: Total height: 4000 mm Body height: 2450 mm Diameter: 2400 mm with agitator: 2800 mm The price is for a tank. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law. Vat Freight cost share: by scope of delivery Delivery: from 97753 Karlstadt-Karlburg Intermediate sale reserved Sightseeing is also possible in the evening or on weekends by appointment.

Cat. No. 11-2515 in very good condition! Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with 1 x welded nozzle centrally in the upper floor through: 50 mm with filling nozzle at the top: 90 mm still facing the front with 2 x transport eyelets with 1 x ladder hook with 1 x holder grif with lace bottom on top Body: with manhole 420 x 320 mm with clear drain DN 50 with tasting valve connection Underbody: with forward pulled outlet pipe DN 50 with lace bottom at the bottom adjustable with 4 calotte feet with base plate Dimensions and weight: Total height: 4500 mm Diameter: 2800 mm Weight: 1500 kg The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law ...

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...