cold storage used for sale

Dry ice cleaner with only 108 operating hours and flexible use of all types of dry ice ColdJet SDI 60 Select ice blasting machine from 2013 With blasting hose, blasting gun (applicator in industrial design with lighting), grounding cable, round nozzle 11mm and flat nozzle 45mm with integrated 3-stage scambler Power supply: 230Volt maximum dry ice capacity of the container approx. 27kg Dry ice consumption adjustable from approx. 0 to 160kg per hour Jet pressure range from approx. 1.4 bar to 17 bar Compressed air requirement depends on the nozzle used The gun with integrated light and the ability to switch between only air and air + ice is very practical The device can be used with 3mm dry ice pellets, or alternatively with ice blocks, discs and nuggets, in which case the required ice is scraped off. So you can flexibly use any available dry ice. Instruction manual in English ...

COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS

Star Cold Water Chiller 2015, Two fan system, refrigeration R404A, 3Ph

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.2 Links -Quantity: 10x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.1 KRT lock V2A -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Overview Cold storage cell with floor insulation Technical data  Temperature range: -1°C to -20 °C  Dimensions (width x depth x height): 7,40m x 15,80m x 3,23m Insulation panel: 100mm | 0,23Wm/ K  Non-slip, waterproof, food safe floor Incl. LED lighting + mounting bracket

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Wir bieten ein gebrauchtes Kühlhaus und Gärschrank an. Abholung aus Deutschland. Price 3000 Euro aus Deutschland.

Item Condition: Signs of Use Availability: as of now Disassembly: by buyer Location: Soest Ceiling Air Cooler: GEA - DEA 081D Power ratings: 230 V, 50/60 Hz Internal dimensions approx.: W 2400 x H 2400 x L 3296 Price: 1450 € VB System: in operation Location: near Soest

Item Condition Wear Function active Location Soest Dismantling by buyer Price 1650,00 € VB

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

Various plastic boxes with various dimensions, used Unit price € 3,36 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Cold water set water-cooled, turbo-cooling machine, Carrier 19XR5556, R134a, 400V 50Hz,Bj 2001,ca 2500KW (700ton)Cooling capacity, little operating hours, always maintained,very good condition, super efficiency.

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

2 pcs available can also be used for other rooms of the food industry Dimensions: Also single for sale per piece 500,00 Euro

We offer the labeler after comprehensive overhaul and modernization (including cabinet). The machine is designed for bonding three paper labels on glass bottle. Implementation of fully stainless steel. Labeller is equipped with two stations: - adhesive label front, neck and back label. Scanning system and label transfer is based on the pallets, which select a label from a magazine, transfer it onto the gripper drum and then onto bottle. The machine is extremely stable and reliable. Support comes down to refill glue and charge labels into magazine. Capacity: max. 24 000 b/h. We provide 1 set of equipment designed for a customer bottle. Machine has full 12-month warranty.

OVERHAULED IN 1997, SAW BLADE DIA.: 1000 MM, DRIVE PIN HOLES: 4 x 30/200 MM; ROUND MATERIAL DIA.: 360 MM, SQUARE: 330 MM; FLAT PROFILES: 600 x 260 MM, 6 STEPS OF SPEEDS,

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Automatic slicer Bizerba A 404, with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Automatic slicer Bizerba A 404 with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Make: Omes Type: Tramatic 370S Year of construction: 1988 Saw blade diameter: 350 mm Features of this machine are: -mechanical pneumatic Vice -hydropneumatic feed can be adjusted (see Control Panel) -Saw process and open the Vice manually or automatically -After reaching the depth of saw the saw head will return automatically to its basic position Saw capacity - 90 ° degree cut -Diameter of 130 mm -100 x 100 mm rectangular tube -Fermentation cuts adjustable - right-hand and left-hand fermentation, if necessary in a voltage Machine has been little used

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

Thank you for your interest in our used machines we can offer you as follows: Many thanks for your interest in our second-hand machinery, please find below our offer: Manufacturer / manufacturer: National Lab model / type: 1000-1 Proficool UKT recirculating cooler/chiller chiller temperature controller Details / different: laboratory chillers ProfiCool UKT 1000 1 / almost good as new! Extremely quiet laboratory chillers with maintenance-free, air-cooled chiller. Heat exchanger made of brass. Control Panel with electronic controls with digital display (LED) as well as separate a / output switches for pump and cooling. External casing made of stainless steel. Filler for filling of the cooling circuit. Hose connections (olives) with a 12 mm outer diameter.

Make: CLIMAVENETA Type: WRAT/SL 0802 Power: 200 kW (100KW) Refrigerant: R407C Built: 2006 2 pcs. compressors Make: DWM Copeland Semi-Hermetic Type: D6SJ1-400X-AWM/D One circle is defective, others are OK. Price on request

TRENNJAEGER Cold circuit saege - see pictures

TUGRA ALU - COLD SAWS TYPE DK 400 -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Material Panel met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

Refrigerant filling and service system Manufacturer: Agramkow Type: RHS 1280 year of construction: 2010

SMEVA 48 M2 Product number:M18-7071 Cooling capacity:0,001 kW Dimensions:8000 x 6000 x 2480 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold room of 48 m2, two entrance doors, 5 drawer kabinets and 10 glass doors (5 frames). Visit also our website: used-refrigeration

SMEVA 27 M2 Product number:M18-7070 Cooling capacity:0.001 kW Dimensions:9000 x 3000 x 2780 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold store with two rooms (15 m2 and 12 m2), an entrance door per room and 10 glass doors (4 frames). Visit also our website: used-refrigeration

OBRIEN ALUMINIUM - COLD SAWS TYPE II VEGA -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Nevelsmeerssysteem -Rollenbaan 300 cm met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE VEGA M II -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Nevelsmeerssysteem -Rollenbaan 300 cm met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE 350 VEGA I -Zaagblad 350 mm -Verstek Dubbel -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE BETA PLUS -Zaagblad 300 mm -Verstek Dubbel -Zaagkop kantelbare -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t

OBRIEN ALUMINIUM - COLD SAWS TYPE ALFA -Zaagblad 300 mm -Verstek Dubbel -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TUGRA ALU - COLD SAWS TYPE AC-400 -Zaagblad 400 mm -Verstek Dubbel -2 pneumatic clamp -Nevelsmeerssysteem -Material Panel met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

5 PCS AVAILABLE BRAND FRIGEL MANUFACTURED 2007 CONDITION USED - IN WORKING ORDER QUANTITY AVAILABLE 5 UNITS MODEL RCD180/24 (180 LTS PER HOUR) TEMPERATURE RANGE 23 TO 194 F (CELCIUS -5 TO 90) VOLTAGE 400 VOLTS FREQUENCY 50HZ SHIPPIING WEIGHT 395.00 Kgs MAX CURRENT 52 AMP FLUID H20 MAX PRESSURE 8 BAR REFRIGERANT R407C HIGH PRESSURE 27 BAR LOW PRESSURE 22 BAR abc.FRIGEL.IT

Ultra slicer his Sodeva -Slicer type CEL 250 -Year 2011

Qty. 1 Second-hand double stand cold rolling mill stand Mfc.: SMS/Germany Type: 4-Hi Double Stand Cold Rolling Mill Built: 2009 Stopped: 2017 Capacity: 800,000 Ton/Year Annual running: 6480 h Strip width: 800 – 1650 mm Thickness entry: 1.8~5.0 mm Exit: 0.3 – 2.5 mm Coil OD: 1000~2200 mm Coil ID: 610 mm Coil Weight: Max. 30 T Line Speed: max. 1350 m/min Threading Speed: 30 m/min

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm