cold rolling mill used for sale

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

closing pressure: 11000 kN clamping plate: . mm distance between columns: . mm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: m Mold spraying machine available Manufacturer Acheson Model DAG 1000 FCT 2TB Year of construction 2002 Foundry robot available Manufacturer ABB Model IRB 6600 Control S4C-Plus Built in 2003 Deburring press available Manufacturer rice Model SEP 9-65 Built in 1988 Delivery time October 2018 An oven can optionally be purchased: Manufacturer Westofen Model W 90 SMC Capacity 900 kg Built in 1988 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 410 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process chiller / chiller air-cooled, Type: TAEevo Tech 351P3-20 MTA S.p.A. TAEevo Tech 351P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, electronic expansion valves, phase monitoring, buffer tank 350 ltr., built-in P3 circulation pump and speed-controlled fans. Cooling capacity kW 66.9 Cold water temp. Exit/Entry (°C): 7 / 12 Medium: Water Volume flow (m³/h) 11.4 Available pump pressure (bar) 3.02 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 37.48 Max. current (A) 64,44 Starting current circuit (A) 208.53 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1065 Connection Rp 2" Serial No.: 2200372599 Year of construction 2021 ...

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 0 t Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 5 to Execution supports Table length: 150 mm Table width: 120 mm Fixed stroke: 30 mm Distance from table to slide: min.: 25 mm max: 145 mm Machine´s weight about: 51 kg Overall dimensions machine: Length: 350 mm Width: 250 mm Height: 550 mm

Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 230/400 volts / 50 Hz / 1.2/0.68 A / 0.270 kW Cutting thickness adjustment without offshoot: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knives including original knife grinder including original operating instructions Power current / 16A CEE plug Year of construction: 2006 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Process air cooler / chiller / chiller, air-cooled, Type: TAEevo Tech 1002 P3 MTA S.p.A. TAEevo Tech 1002 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 99 Max. current (A) 167 Starting current circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Connection Victaulic DN 100 Serial  ...

Machine Type: Cold Water Hose Manufacturer: for washing machines Type: 1/2 inch Condition: new Offer will only be sent if a complete imprint is provided! Price 250 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-SCH-0124-3 DESCRIPTION We offer you a lot of new hoses / up to 10bar / 25 degrees Specifications can be found on the sign in picture 2. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Air cooler / process chiller / chiller air-cooled, Type: TAEevo Tech 251 P3-20 MTA S.p.A. TAEevo Tech 251P3-20 are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulating pump. Cooling capacity kW 50.4 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 8.59 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 26.99 Max. current (A) 45,79 Starting current circuit (A) 144.38 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1023 Connection Rp 2 " Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty Serial No.: 2200342104 Year of co ...

Process chiller / chiller water-cooled, Type: Aquarius G2 - AQG2 1401, Green Refrigerant R513A, MTA S.p.A. The Aquarius G - AQG2 1401, 2601 are water/water chillers for indoor installation. Shell-and-tube evaporators, Bitzer screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 351 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.2 Cooling water temp. Exit/Entry (°C): 35 / 30 Volume flow (m³/h): 73 Refrigeration circuit: Refrigerant R 513A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 128 Max. current (A): 209 Starting Current Circuit (A): 341 Protection class: IP54 Dimensions: Length (mm) ...

Process chiller / chiller water-cooled, Type: AQUARIUS PLUS 2 – AQP2 2601 MTA S.p.A. The Phönix AQUARIUS PLUS 2 – AQP2 2601 are water-to-water chillers for indoor installation. Shell-and-tube evaporators, Handbell screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 654 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 112 Cooling water temp. Exit/Entry (°C): 35 / 30 Flow rate (m³/h): 134 Refrigeration circuit: Refrigerant R 134A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 215.03 Max. current (A): 356.88 Starting Current Circuit (A): 602 Protection class: IP54 Dimensions: Length (mm): 432 ...

Machine type: Aluminum circular saw machine Manufacturer: KALTENBACH Model: TL 200 Condition: good Offer type: used machine Specifications: Cutting range: Ø 55 mm, Leaf Ø: 200 mm Drive type: el./mech. Drive: 0,75 kW, 400 V Remark: portable Weight: 50 kg The machine is in a good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment without offshoot: 0 to 24 mm Knife diameter: 330 mm Stainless steel knives Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size angular: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Footprint (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

saw blade diameter: 315 mm capacity 90 degrees: round: 108 mm capacity 90 degrees: square: 93 mm : 150 x 90 mm Working height: 920 mm saw blade turning speeds: 17+33 oder 33+66 U/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,328 t dimensions of the machine ca.: 0,8x0,9x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200356834 Year of construction 2020 Condition: Optical 2 , Technically  ...

Metal Circular Saw Semiautomat Fabr. FABRIS type SA 300Machine -No: 537, built in 2010Saw blade diameter: 300 mmDrive power: 1.1 / 1.5 kWWith- CE mark- Cooling device- aut. Vice- aut. saw blade feed- several saw bladesUsed, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC circular saw machine make BERG & SCHMID type VKS 370 VA-CNCYear of manufacture 2002Technical specifications:Cutting range 90 ° round: 120 mm: 90 ° square: 100 mm: 90 ° flat: 180 x 100 mm: 45 ° left round: 120 mm: 45 ° left square: 100 mm: 45 ° left flat: 130 x 100 mm: 60 ° left round: 110 mm: 60 ° left square: 90 mm: 60 ° left flat: 90 x 100 mm: 45 ° right round: 105 mm: 45 ° right square: 100 mm: 45 ° right flat: 130 x 100 mmSaw blade dimensions: 370 x 3.0 x 40 mmWorking height :: 925 mmMotor power :: 3.0 kWFootprint approx .: 1900 x 1450 x 2100 mmWeight approx .: 744 kgWith- CE marking- Sirio control- discharge deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for  ...

Metal circular saw make EISELE type VMS IFabr -No: 9000150Saw blade diameter up to: 275 mmCutting area 90 ° round: 90 mmxa0xa0xa0 flat: 75 x 120 mmxa0xa0xa0 45 ° round: 90 mmxa0xa0xa0 Profiles: 75 x 80 mm2 saw blade speeds due to pole-changing motor: 40/80 rpm.Drive motor: 380 V, 1.4 / 1.9 kWDimensions L x W x H: 600 x 600 x 1500 mmWeight approx: 170 kgWith- Underframe- Coolant pumpused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw (chop saw) make IPB Pedrazzoli type Brown MasterSaw blade diameter: 275 mmMiter adjustment via turntable: 0 - 45 ° left2 saw blade speeds: 55/85 rpm.Drive power: 2.5 / 3 kWSpeeds Engine: 1400/2870 rpmExternal dimensions W x D x H: 1000 x 650 x 1800 mmWeight approx: 200 kgWith- on underframe- Quick-action vise- Length stop- Cooling device- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel underfloor circular sawing and centering machine KALTENBACH type RKF 370Fabr. -No: 19 282Sawing area round: 130 mmSaw blade diameter: 370 mm3 cutting speeds hard / medium hard / soft steel: 11, 15, 23 m / minCoolant: waterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS IIMachine -No: 24968 Year 1973Saw blade diameter: 300 mmCutting area flat: 160 x 80 mmflat 45 °: 120 x 80 mmAngle iron 90 and 45 °: 80 x 80 mmU-iron 90 °: NP 16U-iron 45 °: NP 12Tubes 90 + 45 °: 100 mmDouble-T 90 °: 160 x 74 mmDouble-T 45 °: 120 x 58 mmSolid material: 100/75 mmSaw blade speeds: 20/40 rpm.Drive power: 1.4 / 1.9 kWDimensions: 750 x 900 x 1650 mmWeight approx: 300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make RURACK type VS 300-03Year 1995Cutting area flat: 125 x 90 mmCutting area flat / miter: 95 x 85 mmCutting area angle iron: 125 x 90 mmCutting area Miter: 95 x 85 mmCutting area pipes: 100 mmSaw blade size: 300 x 2.5 x 40 mmDrive power: 1.6 / 2.1 kWWeight: 230 kgExternal dimensions: 550 x 800 x 1700 mmWith- Cooling device- Underframeused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Transportable metal circular saw make EISELE type TKS - G / 225Machine -No: 2254 Year 1985Saw blade size: 275 mmCutting area 90 ° round: 90 mm: 90 ° square: 80 x 60 mm: 45 ° round: 60 mm: 45 ° square: 60 x 40 mmSaw blade speed: 58 rpm.Vise swiveling: 90 - 45 °Drive power: 0.65 kWPower connection: 220 V / 50 HzWeight approx: 38 kgOutside dimensions approx: 640 x 320 x 350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Horizontal long-cut cold circular saw make TRENNJÄGER type PMC 6Machine -No: 282, built in 1989Saw blade diameter: 460 mmCutting height: 150 mmCutting area at 90 °: 650 x 150 mmCutting area at 45 °: 450 x 150 mmWorking height: 850/950 mmExternal dimensions: 2300 x 820 x 1900 mmWeight: 1500 kgWith- 3 vertical hydr. clamping cylinders- miter device- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS II / 033Machine -No: 31902 Year 1976Saw blade diameter: 275 mmCutting area flat: 140 x 70 mmMiter cutting area: 100 x 70 mmPipes: 3 U-iron: NP 14 / NP 10Solid material: 80/60 mmSquare material: 50 x 50 mm2 saw blade speeds: 40/80 rpmDrive power: 1.9 kWOuter dimensions approx: 800 x 700 x 1500 mmWeight approx: 268 kgWith- pneum. vice- Underframe- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cold circular saw make KALTENBACH type KKS 350Fabr. -No: 22003, built around 1965Saw blade diameter: 350 mm2 saw blade speeds: 15 + 30 rpm2 cutting speeds: 16.5 / 33 m / minSaw cross section approx: 130 x 50 mmaround max. 80 mmClamping stroke max. : 45 mmExternal dimensions L x D x H: 1000 x 1200 x 1900 mmWeight approx: 1500 kgWith:- pneumatic workpiece clamping (holding down)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- pneumatic swivelling of the saw head - pneumatic workpiece clamping - incl. operating instructions in German - Year of construction 1996 Specifications - Saw blade Ø: 450 mm - Miter range: +/- 45 ° - Connection voltage: 400 V - Dimensions WxHxD: approx. 1050 x 1600 x 1300 mm - Weight: approx. 500 kg

Process refrigeration machine / chiller air-cooled, Type: TAEevo Tech 402 P3-20 MTA S.p.A. TAEevo Tech 402 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 500 ltr., built-in P3 Circulation pump and condenser pressure control. Cooling capacity kW 96.1 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 16.5 Available pump pressure (bar) 3.46 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 48.89 Max. current (A) 81,55 Starting current circuit (A) 176.12 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1701 Connection Rp 2"1/2 Serial No.: 2200371822 Year of construction 2021 Condition: Opti ...

Rotational speed: 8-64/min, with Welding Robot OTC DR-4000, controls: OTC DR CONTROL.

Nominal current: 7.6A, voltage: 380V.

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

Fully automatic slicer / packaging line with marking system Cutting / Depositing / Packaging / Weighing / Marking KUCHLER S.A.M. PX3 Specifications: Type slicer: SAM PX3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Weighing & Labeling Unit: Mettler Toledo PAZ UC-GTT-M, 3/6 kg 400 volts / 50 Hz / 3.8 A Year of construction of cold cuts & packaging line: 2018 Year of construction of weighing & labelling unit: 2018 Film size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Performance up to 150 packages per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, teflon coated including original knife grinder including original knife lifter including original operating instructions Original price in this version approx. EUR 52.000, ...

Saw blade diameter: approx. 300mm, control: APS Elektronic. Dimensions X/Y/Z: 800mm/1200mm/1600mm. Including 2 roller conveyors (sheet steel), dimensions X/Z: 4000mm/1000mm. Defective but not irreparable. On-site inspection is possible.

Saw blade diameter: 400mm, length: 1080mm, width: 900mm, height: 1760mm, weight: 925kg.

Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories.

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024.

Number of forming stages: 5, pressing force: 250t, max. wire diameter: 23mm, cutting length: 180mm, ejector stroke die/punch: 140/60mm, tool dimensions length/diameter knife: 70/56mm, die: 200/110mm, punch: 227/90mm, weight: 52t, with enclosure, an inspection is possible.

saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm

Equipped with 2x external motor, 2x evaporator, sliding door, wicket door. Must be dismantled by the buyer himself.