cold rolling mill used for sale

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

Various millstones

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

Exchange units for contour milling HOMAG

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 1000 mm, 500 mm, 530 mm

Like new: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle mount: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system -Operating instructions Country of origin: Taiwan Engine power: 10 hp Machine LxWxH: 2,900 x 2,280 x 2,550 mm Machine weight: 3,100 kg

Notching cutter Comall Type: Mill One

General SKU248T375 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt With variable speed drive1800 rpm Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10208388 Year of construction1996 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed ...

General SKU248T376 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10208386 Year of construction1996 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemical ...

General SKU319M527 LocationBarneveld MakeLehmann TypeWD-13 No.09442 Main Features Motor55 KW Inlet diameter400 mm Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400mm Roll width1300mm Rolls placed inclinedcheck Motor+/- 55KW Hydraulic roll adjustmentcheck Rolls can be cooledcheck With inlet hoppercheck With scrapercheck MaterialMild steel General Year of construction1990 Floorspace2,7x1,7 M Total height1,8 M Weight5900 KGThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsLehmannMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemica ...

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

This Mazak SLANT TURN 40N - ATC Mill center 1500 was manufactured in 1986. A robust turn-mill centre, it offers reliable performance for various machining needs. Consider the opportunity to buy this Mazak SLANT TURN 40N - ATC Mill center 1500. Contact us for more information.

General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm Jet Mills MaterialStainless steel 1.4306 (304L) General MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicMicromacinazioneMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndust ...

General SKU435X1379 LocationBarneveld Main Features Motor7.5 KW Width340 mm Specified Features - Hammer Mill Hammer millcheck Moving hammers24 Hammer width20 mm With sieve cagecheck Housing dimensions 340 x 500 mm Inlet340 mm Motor7,5 kW (400 V, 1470 rpm) With variable speed drivecheck Speed882—1764 rpm Hammer Mills MaterialMild steel General MakeJehmlich GmbH Nossen SerialK190430 TypeHM 341 Year of construction2018 Mounted on framecheck With switchcheck With switchgear(as is) Floor space1,45x0,62 m Total height1,95 m Weight600 kg Extra SpecificationsMax capacity up to 20 t/h.Hammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteJehmlich GmbH NossenMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustr ...

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm General No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX designedcheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steelWith sound proof cabinetWorking hours 56 hrsBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsSiebtechnikMills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries  ...

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel General TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith:dust filter AZOblower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpmhopper with gear motor: 0.2 kW, 2730 rpmHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteHosokawa AlpineMills > H ...

General SKU351W929 LocationBarneveld MakeAubema Main Features Motor18.5 KW Width200 mm Specified Features - Hammer Mill Hammer millcheck Rotor size340 mm Grinding room size200 x 600 mm Moving hammerscheck Hammer width190 mm With grinding platenscheck With hoppercheck Inlet200x300 mm Motor18,5 kW, 380/660 volt, 1460 rpm Speedinvullen Hammer Mills MaterialMild steel General Type2506/2 No.8227 Year of construction1993 Mounted on framecheck With switchcheck Floor space2,6 x 1,1 m Total height2,5 m Weight1000 kg Extra SpecificationsOutput: 200 x 900 mm Technical specs Extra informationOutput: 200 x 900 mmHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteAubemaMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additi ...

General SKU248T369 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10294318 Year of construction1998 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemical ...

General SKU248T371 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm Motor75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10188335 Year of construction1996 Floorspace2,6x1,7 m Total height1,6 m Weight4452 kgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemical > Dyes & pigm ...

General SKU248T372 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10294316 Year of construction1998 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemical ...

General SKU248T370 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10294314 Year of construction1998 Floorspace2,5x1,7 m Total height1,6 m Weight4452 kgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemical > Dy ...

General SKU248T377 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt With variable speed drive1800 rpm Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10208385 Year of construction1996 Floorspace2560x1700 mm Total height1600 mmThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedI ...

General SKU248T373 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialStainless steel General No.10270830 Year of construction1996 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemical > Dyes & pi ...

General SKU248T380 MakeBühler LocationBarneveld TypeSDVE-900 Main Features Motor55 KW Width900 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width900 mm MotorLandert, 55 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.74873 Year of constructionunknown Floorspace2400x1700mm Total height1600mm Weight4200 KgThree roll millsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Chemical > Dy ...

General SKUR1161 MakeHoogendijk Utrecht (NL) LocationBarneveld Type3ET Main Features MaterialMild steel Motor0.55 KW Specified Features - Ball mill Frame with rollscheck Between the rolls55, 80, 105, 130, 155, 180, 205, 230, 255mm Number of stages:3 Motor0,55 kW 220/380 Volt Speed38-66 rpm MaterialMild steel General No.875 Year of construction1988 Floorspace1,9x0,5 M Total height1,5 M Weight350 KgBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigments-Mills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Con ...

General SKU362X851 MakeCOLLIN LocationBarneveld CEcheck Type3-Roller Calander: calander type 250 × 600 Main Features Motor46 KW Width600 mm Specified Features - Mixing mill Roll width600 mm (nominal 500 mm) Roll diameter252 mm Rolls can be heated/cooled(roller 2&:3) 9 kW: 320 °C With variable speed drivecheck Roll speed± 8,6 rpm Rolls can be adjusted0—2 mm With hydraulic unitcheck With motorcheck MotorServo motor nominal power 1.4 kW (per roll drive): unwinder 0.24 kW: winder 0.24 kW: hydraulic pump 2.2 kW: oil cooler 0.25 kW: heating 9 kW per heated roller Mixing mills MaterialHardened Tool Steel General No.4490-07-06 Year of construction2006 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace3,12 x 1,8 m Total height3,16 m Weight3500 kg Extra SpecificationsApplication: finishing/planishing of foil materials up to 2 mm thickness&: ...

Used colloid mill made by JM Series Colloid Miller. New 2008. 11kW motor.

General SKU223Y099 MakeAlpine TypeAFG-100 Year of construction1985 Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) With variable speed drivecheck Jet Mills MaterialStainless steel 1.4541 (321) General LocationBarneveld Mounted on wheelscheck With switchgear(as is) Floor space1,70 x 1,10 m Total height2,40 m Extra information Extra SpecificationsWith K-Tron dosing screw, type T20A, 0.25 kW:Becker vacuum pump:Alpine stainless steel filter, type K6R, 2.4 m²:with spare rotors and parts:Jet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicAlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical >  ...

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

General SKU363X853 MakeHosokawa Alpine LocationBarneveld CEcheck TypePulvis PV450 Main Features MaterialStainless steel Volume25 Ltr. Motor11 KW Specified Features - Ball mill Grinder(Agitated ball mill (dry grinding)) With jacketcheck Ball mills Continuous ball millcheck Capacity25 l Drum sizesø 485 mm InletDN100 OutletDN100 With jacketcheck Motor11 kW Speed300 rpm With ballscheck Specified Features - Ball mill Capacity25 l. Housing dimensions ø 485 mm InletDN100 With jacketcheck Motor11 kW Rotor speed300 rpm With ballscheck MaterialStainless steel 1.4301 (304) General No.M3 239783 Year of construction2016 Mounted on framecheck With switchgear(as is) Extra SpecificationsHosokawa Alpine Pulvis PV450 with Hosokawa Alpine ATP 140Dry agitated media mill for the production of ultrafine powders.The dry agitated bead mill is equipped with an integrated d ...

General SKU043R200 LocationBarneveld MakeEngelsmann TypeMFL 85N/80-E1 Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) General No.30223/88 Floor space1,7x0,7 m Total height1,2 m Weight800 KgHammer MillsCatalysts & fillersFeed additivesDiscountOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteEngelsmannMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesDiscountIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Chemical > Dyes & pigmentsIndustries  ...