cold roll used for sale

Won't work, won't start, wiring harnesses burned Auction-ID: A1-49695-101

Working parameters: STORO PACK AIR PLUS bubble wrap/air cushions for packaging and cushioning Equipment included: 12 pallets of 60 rolls each, i.e. 720 rolls in total, with StoroPack inflating machine included Manufacturer: StoroPack Dimensions (mm): 1200 × 1000 × 1400 per pallet, estimated Auction-ID: A1-50002-27

Tru-Turf R52-11TC Golf Greens Roller – 2016 – 132 cm – including new rollers Specifications: Brand: Tru-Turf Type: R52-11TC Golf Greens Roller Year of construction: 2016 Production date: 03/2016 Serial Number: UST1801 Working width: approximately 132 cm Engine: Honda 1-cylinder 4-stroke petrol engine Engine power: approx. 4.8 kW / 6.5 hp Transmission: Eaton 11 hydrostatic Drive: self-adjusting duplex chain Control: joystick / steering stick Roller/Bowing System: 3-piece, contour-following Width of ironers: approx. 46 cm per section Drive roller: flexible, vulcanized rubber-coated Ground pressure: approx. 22.4 kPa Weight: approx. 325 kg Transport weight according to factory data: approx. 360 kg Features: Patented triple offset ironing roller system Contour-following flexible drive roller Hydrostatic drive Joystick control Driver's seat with armrests  ...

Consists of: 5 pieces Blumenbecker-Technik GmbH, type: KFC, year of construction: 2018, own weight per car: approx. 552 kg, maximum permissible total weight per car: approx. 2,352 kg, permissible speed: 25 km/h, version: container dolly / baggage car / roller frame, construction: steel frame with roller conveyor, color: yellow, equipped with drawbar, equipped with front and rear coupling, solid rubber tires, total width approx. 1,680 mm, platform length approx. 1,545 mm, platform width approx. 1,200 mm, roller deck with 3 roller conveyors, transport of ULD containers and air cargo containers, standard DIN EN 12312-11 airport equipment, LD1, LD2, LD3 and similar ULD containers, air cargo containers, mail and cargo cargo, baggage containers between aircraft, terminal and sorting center, several units available on request, total length (drawbar up) 3,200 mm, total length (drawbar down) 3,92 ...

Roundo PS 310 Number of rolls: 3 Roll capacity cold: 3100 x 18 mm Roll dia upside: 310 mm Dia under roll - side rolls: 340 Length: 4600 mm Depth: 1500 mm Hight: 1330 mm Weight: 9600 kg

consisting of three rollers Working length: approx. 1500 mm Reference: STS - Lot 6 Auction-ID: A7-49882-247

consuming oil, repaired water tank Auction-ID: A7-50037-4

Auction-ID: A7-50037-20

Wire thickness 2mm. Various lengths on a roll. 4x roll wide 1220mm, 5x roll 1530mm wide. Auction-ID: A1-49875-109

Roundo R4S 30 cm3 Dia rolls: 275 mm Dia of die mandrel: 105 mm Rotationspeed: 1 > 5 m/min Motorpower: 5,5 kW - 8,6 HP Length : 1250 mm Depth: 1250 mm Height: 1500 mm Weight: 3 ton

Flens-/kraalmachine voor de productie van drukvaten, silo´s, opslagtanks, tankwagens en spoorwegtankwagens. Max werkstukdiameter: 6 meter De flensmachine start het buigproces door de rand van het werkstuk netjes tussen twee mallen te plaatsen: één mal is bevestigd aan de bovenste reductiekast en de andere is vrijstaand aan de onderkant. Wanneer de bovenste spindel draait, start het draaiproces en wordt hydraulische cilinder nummer 3 omhoog bewogen. De randen van de gebogen uiteinden worden gebogen door de lineaire beweging van hydraulische cilinders 1 en 2. Dit proces wordt twee of meer keer herhaald totdat de gewenste waarden voor dikte, diepte en diameter zijn bereikt.

Complete heavy-duty roller conveyor system from previous door production for self-dismantling or with separate dismantling by agreement, Approx. 75 linear metres Heavy-duty roller conveyor elements without drive, Roll lengths 500mm, roll diameter 100mm Stands, can be dismantled into individual sub-segments, of which 6 elements L5800 W600 H320mm standing up to H459mm with end-stop rocker, 2 elements L3000 W600 H320mm standing up on H450mm with end-stop rocker, 7 Elements L3800 W600 H320mm with End Stop Rocker 1 element L3050 W1150 H450mm 2 cross carriages L2800 B800 H450mm with rope stop 1 cross carriage L2400 B1150 H450mm with one-sided stop 1 cross carriage L2100 B1200 H450mm with single-sided stop 1 movable roller conveyor element L3800 W800 H 400mm with rope stop & stanchion pockets Complete acceptance

Including rack size approximately 265x100xH156cm. Auction-ID: A1-49374-49

being 16 rolls 450x10000mm (thickness 120mm), 11 rolls 350x10000mm (thickness 120mm), 9 rolls 450x8000mm (thickness 150mm), 2 rolls 350x7500mm (thickness 100mm), 2 rolls 350x10000mm (thickness 100mm) Auction-ID: A1-49374-154

Tank capacity 2.5L; vibrations 5500r/min; 16L water tank; manual; unused; 6531 Auction-ID: A1-50091-53

inv 6780 : Gravity Roller Conveyor Overall dimensions (W x D x H): 1230 x 610 x 780 mm Roll dimensions: 550 mm Equipment weight: 50 Kg Roll diameter: Ø 50 Auction-ID: A1-49706-194

thickness 60mm; 26 rolls 600x12000mm, 10 rolls 450x12000mm, 7 rolls 350x12000mm Auction-ID: A1-49374-153

Tank capacity 2.5L; vibrations 5500r/min; 16L water tank; manual; unused; 6531 Auction-ID: A1-50091-52

inv 6785 : Roller Conveyor Overall dimensions (W x D x H): 3300 x 1500 x 1300 mm Roll width: 60 mm Roll diameter: 45 mm Weight: 100 kg Incoterm: FCA Auction-ID: A1-49706-196

inv 5095 - Conveyor Type: Roller Roll width: 450 mm Overall dimensions (W x D x H): 3700 x 550 x 330 mm Equipment weight: 300 kg With two 90° transfers, dimensions 550 x 550 x 330 mm Auction-ID: A1-49706-84

Carousel rack for carpet and flooring rolls Robust and fully functional carpet paternoster (carousel shelf) from the manufacturer Hubtex, model TRPA. The system is ideal for space-saving, vertical storage and display of carpets, PVC rolls or other heavy roller goods. Master Data & Weights Manufacturer: Hubtex Maschinenbau GmbH (Fulda) Model / Type: TRPA Engine Number: 39080 Maximum load capacity: 2,750 kg Length approx. 5000 mm Permissible unload (imbalance): max. 500 kg Net weight of the system: 1,200 kg Capacity: approx. 14–16 support rods / roller places Electrical connected loads Mains voltage: 380 V 3 N~ + PE 50 Hz Rated power: 0.75 kW Rated current: 2.1 A Degree of protection: IP 44 The carpet and floor coverings for the circulation shelf can be purchased for € 1000 net extra. Item location: Frankfurt am Main Period: The collection m ...

inv 5709 - Set of 2 conveyors Manufacturer: Interroll Type: Roller Year: 2009 Overall dimensions (W x D x H): 2050 x 700 x 820 mm Weight: 200 kg Auction-ID: A1-49706-112

as well as 4 rolls of Isoconfort with various sizes, see photos Auction-ID: A1-49374-204

- including opened rolls. - about 120 pieces, - Without stretch. Auction-ID: A1-49374-261

Graule RO-ST60 Roltafel met aanslag en pneumatische rem Merk: Graule Type: RO-ST60 Lengte: 3.0 meter (netto) Maat instelling: Grof en fijn verstelling Nauwkeurigheid: 0.1 mm Condition: functional checked

Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 105 Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer Böttcher Böttcher KBA RA 105 Roller 0905480 B 1902 Böttcher KBA RA 105 Roller 0905495 B 1903 Böttcher KBA RA 105 Roller 0905473 B 1703 Böttcher KBA RA 105 Roller 0905472 B 1702 Böttcher KBA RA 105 Roller 0905476 B 1511 Böttcher KBA RA 105 Roller 0905476 B 1601 Böttcher KBA RA 105 Roller 0905476 B 1606 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905470 B 1702 Böttcher KBA RA 105 Roller 0905474 B 1604 Böttcher KBA RA 105 Roller 0905470 B 1605 Böttcher KBA RA 105 Roller 0905471 B 1605 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905473 B 1606 Böttcher KBA RA 105 Roller 0905495 B 1605 Böttcher KBA RA 105 Roller 0905480 B 1605 Böttcher KBA RA 105 Roller 0905472 B 1605 Böttcher KB ...

Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze für Heidelberg SM XL 105 New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller for Heidelberg SM XL 105 0902004 A 1812 (x5) - Neue Farbübertragswalze / New Ink Transfer Roller - Sach Nr. F2.009.120F/07 - Kennz. ROT 0902014 A 1405 (x2) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1404 (x1) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1411 (x1) - Feuchtauftragswalze - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902012 A 1405 (x1) - Feuchtdosierwalze Pro Aqualis - Sach Nr. F2.030.510F/03 - Kennz. OHNE

Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK in good working condition. Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK Baujahr / Year 1999 - Serial-No. 210271 Arbeitsgeschwindigkeit / Speed max. 550m/per Minute Arbeitsbreite / Working width max. 1650mm Schnittbreite min. 50mm bei Hülsen 70 & 76mm /  Cutting width min. 50mm  Cutting width 70 & 76mm Schnittbreite min. 200mm bei Hülsen 152mm /  Cutting width min. 200mm  Cutting width 152mm Zu verarbeitendes Material / Material to be processed: Kunststofffolien aus / plastic films made of: PE, PP, PA, PET, PVC, Papiere und Laminate Hartfolien / hard films ca. 10 - 250 µm Weichfolien / Soft films ca. 20 - 500 µm Aufwicklung / Rewinder Aufwickel-Druchmesser / Rewinder Diameter max. 610mm Aufwickelhülse / Winding Sleeve: Pappe, Kunststoff oder Metall  ...

Der Schrägrollentisch dient zur Überbrückung von Höhenunterschieden und Maschinenzwischenräumen. Außerdem benutzen Sie den Schrägrollentisch als Basisstation für den Cardtipper (mit GWG), den Tapesspender (mit GWG), die OUE-Einrichtung oder zum Gummieren. The inclined roller table is used to bridge height differences and gaps between machines. You can also use the inclined roller table as a base station for the card tipper (with GWG), the tape dispenser (with GWG), the OUE device or for gumming. Schrägrollentisch / Inclined Roller Table GUK RT 46 Baujahr / Year 1994 - Serial-No. 34088 fahrbar und höhenverstellbar / mobile and height adjustable

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40

with plastic roller blind, 5 shelves height-adjustable, without contents Auction-ID: A1-50085-34

This combination is intended to accommodate toilet roll and toilet brush in one built-in element. The front of the toilet roll section can be tiled, so that the element can be incorporated into the wall finish. The toilet brush holder is not included and therefore not included. The product is designed for installation during wall construction and is therefore particularly suitable for new construction or renovation where the wall is still accessible. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-218

Pipe Thread Cutter - For threads 1/4\" to 4\" - Footswitch - 2. Threaded jaw holder - Incl. cutting jaws see pictures Auction-ID: A7-50084-63

No nameplate available ; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not guarantee traffic and operational safety; The dimensions, weights and other data given are to be understood as non-binding guideline values. No liability is assumed for the accuracy of the information ; Auction-ID: A1-50030-22

with plastic roller blind, 5 shelves height-adjustable, without contents Auction-ID: A1-50085-33

with plastic roller blind, 4 shelves height-adjustable, without contents Auction-ID: A1-50085-37

Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm Auction-ID: A7-50084-41

Specificaties: 4 rollen Plaatbreedte: 3600 mm Diameter: 4000 mm Diameter van de bovenrol: 1500 mm Diameter van de zijrollen: 1100 mm Diameter van de onderste middenrol: 1450 mm 7000 ton Maximale dikte: 200 / 270 mm Maximale druk op de bovenste rol: 7300 ton Rolmateriaal 60CrMoV12.5 Hydraulische rotatieaandrijving Software: Beckhoff Besturing: Swiss Bend-IT Technology V.3.4.0 Luchtverbruik: 4 bar / 35 m³/u Afmetingen: 15000 x 7200 x 7890 Gewicht 750 ton IN TOPCONDITIE Number of rolls: 4 Roll capacity cold: 220 mm Roll capacity warm: 270 mm Type: VRM Hy 36-4712 Roll dia upside: 1500 mm Dia under roll - side rolls: 1450 / 1100 mm Driven rolls: Centre top and bottom rolls driven Power needed: 850 kW Length: 15 000 mm Depth: 7200 mm Hight: 7890 mm Weight: 750 ton

Description Item # 9383 – ROLLED WAFER STICK OVEN Manufactured by HAAS Model EWB-R 2,2/4 GA Year 2016 Natural Gas Fired 150kw Heating Capacity 3 x 400Volts, 50Hz Can produce Single or Twin Colour Wafer Tubes Also can produce with cream fillings Wafer Tube Sizes : Inner diameter: 7 mm Outer diameter: approx. 11,0 mm (depending on winding pitch) Length: approx. 60-113mms, Weight: 5-9 g Approx. 56kg/hour, the exact output depends on recipe

Description Item # 9384 – ROLLED WAFER STICK OVEN Manufactured by HAAS Year 2011 Model EWB 22 Electric Heated 400Volts, 50Hz Can produce Single or Twin Colour Wafer Tubes Also can produce with cream fillings Wafer Tube Sizes : Inner diameter: 7 mm Outer diameter: approx. 11,0 mm (depending on winding pitch) Length: approx. 60-113mms, Weight: 5-9 g Approx. 56kg/hour, the exact output depends on recipe

Sold without shelves. Auction-ID: A1-49997-61

Swivel roll, with 25 meter extension, equipped with n. 4 schuko sockets, and safety switch, never used Overall dimensions: 400 x 400 x 400 mm Weight: 10 kg Auction-ID: A7-50208-306

Swivel roll, with 25 meter extension, equipped with 4 schuko sockets, and safety switch, never used Overall dimensions: 400 x 400 x 400 mm Weight: 10 kg Auction-ID: A7-50065-439

Toilet roll holder + slide bar The Wiesbaden Alonzo toilet roll holder is suitable for hanging one toilet roll and has a flap at the front. The installation takes place on the wall with screws and plugs. The slide bar with water connection is equipped with a water outlet with which a separate shower hose can be connected. The hand shower holder can be adjusted in height via the rail. The manufacturer indicates that the slide bar can be combined with both exposed and built-in taps from Wiesbaden. Hand shower and shower hose must be purchased separately. Mounting material is included. Dimensions indicated are for the slide bar. Thermostatic valve in Gun Metal (incomplete, missing 1 rotary knob) \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the descript ...

Swivel roll, with 25 meter extension, equipped with 4 schuko sockets, and safety switch, never used Overall dimensions: 400 x 400 x 400 mm Weight: 10 kg Auction-ID: A7-50065-456

Inspection table with rollers of unidentified make/model, equipped with several rollers, an electric drive and a mobile chassis on wheels. The machine also has a brush system as well as a control box with on/off and emergency stop buttons. The whole is in good general condition with traces of use and dust related to storage. According to the owner, the table is functional. However, the operation could not be verified by the broker during the visit. Key Elements Roller inspection table Multiple conveyor rollers Electric motor drive Brush system Control box \"Start\" and \"Stop\" buttons Emergency stop Mobile metal chassis Swivel casters Roussel Agri 62 plaque/sticker Overall good condition, traces of use Owner-declared, not broker tested Auction-ID: A3-46162-41006

Claas Rollant 250 round baler from 2003, in excellent working order. The machine has been particularly well maintained over the years. Its very good general condition, despite its 23 years, testifies to the care taken in its maintenance and use. The pick-up, rollers and various mechanical components are in very good general condition. The press works perfectly and is ready to work. Very good machine, robust and well preserved. Serial number: 72506591. Auction-ID: A3-46162-36380

Swivel roll, with 25 meter extension, equipped with 4 schuko sockets, and safety switch, never used Overall dimensions: 400 x 400 x 400 mm Weight: 10 kg Auction-ID: A7-50066-439

Vibratory roller, diesel engine, double vibratory roller, electric ignition, power steering, water system, never used Overall dimensions: 2000 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-50066-115

CMG Meadow repairer with 3 metre roller. Equipped with a heavy Guettler roller, a spring tine harrow and an adjustable rear levelling blade. 3-point hitch. Suitable for meadow maintenance, soil consolidation and surface land preparation. Game damage repairs. Auction-ID: A3-46162-39090