134,391 used machines on RESALE, but how to find them? Machine Search
saw blade diameter: 300x32x2,5 mm capacity 90 degrees: round: 10-90 mm capacity 90 degrees: flat: 80x10-80 mm : 10-40 mm : 10-40 mm : 40x10-40 mm capacity 90 degrees: square: 10-80 mm weight of the machine ca.: 600 kg dimensions of the machine ca.: 2590x1910x1910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
air-cooled chiller, 3.6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suited for smaller cold water supplies of process applications. Compact design, simple control.
The refrigeration system was used by us for 1 year in the rental. The chiller has 2 refrigeration circuits and fan control. the cooling capacity is 240kW at 7/12°C and 35°C ambient temperature. the refrigerant used is R140a
The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Internal pump, tank, fan control. Cooling capacity 37 Kw
Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Refrigeration Machines, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 59.6 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 10.2 Head available bar: 1.68 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4 Dimensions: Length mm 2470, width mm 1112, height mm 1595 Weight kg 750 Connection R 2" Serial No.: 2200416573 Year of construction 2024 Condition: Optical 1, Technical 1 (Bearing Machin ...
Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz
chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.
Miwe cold store control NK1 still in working order, built in 1998
Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,
Chiller made by Linde Self-made for low temperatures, goes down to minus -25 °C, with two refrigeration circuits. With two Bitzer 6G-30.2Y compressors as main compressor and two 2N-7.2Y compressors as subcoolers. Bundle tube heat exchangers, condensers, etc. Compressors have been renewed.
Wir bieten ein gebrauchtes Kühlhaus und Gärschrank an. Abholung aus Deutschland. Price 3000 Euro aus Deutschland.
saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm
Key data: 360 mm
Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--
saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm cutting range - square -: 120 x 120 mm cutting range - flat -: 300 x 40 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 245 x 40 mm mitter cutting - all-position: 90 ° cutting speed: 13 / 25 m/min control: minipos 807 total power requirement: 4,3 kW weight of the machine ca.: 850 kg dimensions of machine L x W x H: 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cold Circular Saw Semi-Automatic - Miter - Micro spraying device - Protective cover - Emergency stop facility Saw blade diameter 400 mm Cutting diameter 130 mm Saw blade speeds 30 / 60 rpm Cutting range at 90 degrees: square 120 mm Total power requirement 4.8 kW Machine weight approx. 1.8 t Dimensions L x W x H 1.4 x 1.2 x 2.3 m
Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm
saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 410 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 65 mm : 50 mm : 83 mm : 82 mm rest piece length: 40 mm : 6 mm dimensions of saw-blade: 250 x 2 x 1.7 x 32 mm speed: 50-200 m/min engine output: 7,5 kW : 200 mm/sec. work height max.: 845 mm dimensions: 2225x1950x1980 mm weight of the machine ca.: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Müller Martini Econobinder EB II Year 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
saw blade diameter: 400 mm capacity 90 degrees: round: 135 mm capacity 90 degrees: square: 130 mm : 200 x 80 mm saw blade turning speeds: U/min total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,0 x 1,8 x 1,95 m Automatic circular saw with - Feed type RB 1500 - Roller conveyor 1500mm Good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:
Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - / Contact us at -
saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: square: 110 x 110 mm capacity 90 degrees: flat: 140 x 110 mm capacity 45 degrees: flat: 140 x 90 mm total power requirement: 2,6 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 0,95 x 1,38 x 1,85 m Accessories: 1 used sawblade 350 mmø, coolant - with hydr. clamping of workpiece and hydr. feed of sawblade - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cold work tool steel 4 pcs Diameter 299 Length 232mm Weight 191.5kg Wnr. 1.2379, X153CrMoV12 EN/ISO 4957 forged, annealed, peeled, or overturned, round DIN 7527 Bl.6
saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 220 x 80 mm feed length: 600 mm feed length: multiple: 1800 mm cutting speed: 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of machine L x W x H: 2,45 x 1,20 x 2,00 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 330 x 40 mm capacity 45 degrees: round: 140 mm capacity 45 degrees: flat: 250 x 40 mm cutting speed: 10 - 70 m/min saw head feed: 0 - 1000 mm/min sawing motor: 1,7 / 2,6 kW weight of the machine ca.: 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inclined Slicer Slicer / Slicer BIZERBA GSP H Specifications: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Year of Make: 2017 Function checked, machine ready for immediate use! Condition, see original pictures!
Italma slicer, flywheel machine on a pedestal, red lacquered in vintage style, knife diameter 330mm, the flywheel automatically drives the blade, carriage and feed, an eye-catcher for customers. Weight approx. 123kg, Machine used, in good condition, fully functional
Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976
Manufacturer: Igomak, Year: ca. 1970, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Stück/Durchmesser 100 ca, FREE TEXT: Heizplatte Oben/Veröängerte Tisch jede Seite 1000 mm, Year :ca. 1970
saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height
saw blade diameter: 275 mm cutting diameter: bis 90 mm cutting range flat: 120 x 75 mm turning speeds: 40/80 U/min miter cut: 45°/90°/-45° ° weight of the machine ca.: ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 425 mm, 145 mm, 120 mm
Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm
cutting diameter: 260 mm serial number: 109967 volt: 380 V frequency: 50 Hz weight of the machine ca.: 500 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 225 mm cutting diameter: max. 60 mm feed: max. 600 mm total power requirement: 5 kW weight of the machine ca.: 1,03 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 40/80 U/min : 0025 voltage: 380 V clamping: ja kW miter: ja weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 380 mm pneumatic clamping: ja weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm miter: . : Kühlung weight of the machine ca.: 1 t number: 4 Stück The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
40 € 
