127,532 used machines on RESALE, but how to find them? Machine Search
CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC
General SKU316W637 MakeMixaco TypeCM-30 No.SN050024 Year of construction2005 Mounted on framecheck Main Features MaterialStainless steel Volume24 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercheck Capacity24 l Vessel sizesø 400 x 300 mm Inlet400 mm Manual operated outletcheck Outletø 125 mm With motor5.5 kW (400V, 1425 rpm) Rotor speed1425 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld Floorspace1,40 x 0,90 m Total height1,25 m Weight250 kg Extra SpecificationsWith 2x mobile barrels, volume 24 l each.Cold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...
General SKU203P131 MakeMixaco Maschinenbau GmbH (DE) TypeLAB CM 6-MB No.080139 Year of construction2008 Mounted on framecheck Main Features MaterialStainless steel Volume6 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercontainermixer Capacity6 Ltr (nett) Vessel sizesdia.260x160mm With cover(jacketed ) Manual operated outletdia. 75mm Max. temperature90 Degr .C. With motor5,5 KW, 400 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1.1x0.8 M Total height1,9 M Weight350 KGCold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.
used
Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP
Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o "rectangular" forms 28 places for pralines (14 pralines, "violin" shape, 14 pralines each) trumpet shape) o "rectangular" forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape "piano") o Molds in the shape of a "trunk" 28 places for pralines o "Small ball" shaped molds 28 places for pralines o "Big ball" forms 28 places for pralines o "Square" forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms "bears", "cats" 56 places for pralines (28 "bears", "cats" each) ...
Key data: 150 mm
Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg
Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM
Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer
In good condition CO2 installation & cold room build in 2021. Cold room temperature +-4°C and a evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and a isolation value of RC 5,21. Further the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machineset and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a low-temperature Bitzer 2HSL-3K-40S & medium-temperature Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a D ...
Chiller - Euro Cold 09-CF-02960 / New, unused Year of Make: 2014 Location: Lodz, Poland Description: Cooling capacity approx. 45 kW Refrigerant R407C The device has: - 1 compressor - Separate container for medium - Barrel pump -Radiator - Fan x 2 The device has an additional heating function and can be used to control the temperature of tools The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Grundy Tank 400L / 90Gallon Insulated and Clad in welded Stainless Steel 50mm of insulation Bolted top lid with internal cooling coil attached Temperature probe pocket working pressure 30psi This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...
General SKU099Y827 LocationBarneveld MakeMixaco TypeLab. CM-12 Disp. Main Features MaterialStainless steel Volume12 Ltr. Motor3 KW Specified Features - Cold mixer Cold mixer:Container mixer: (1x) Capacity10 Ltr (useful) Vessel sizesdia. 250x135mm, Conical bottom 120mm Manual operated outletdia. 70mm With motor3,0 KW, 230/415 Volt With variable speed drive(frequency converter) MaterialStainless steel With jacketcheck General No.SN 010280 Year of construction2001 Mounted on framecheck With switchgearcheck Floorspace1,5x1,0 M Total height1,7 M Technical specs Extra informationconical bottom 120 mmDiscountCold mixersMixacoDiscountPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...
General SKU030H080 MakeMixaco Maschinenbau Neuenrade TypeLab CM 6-12 No.22.3406 Year of construction1999 Mounted on framecheck Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume12 Ltr. Motor4 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity4,8-10,0 Ltr (useful) Vessel sizesdia. 260x155mm, Conical bottom 135mm With covercheck Manual operated outletdia. 80mm With jacket(jacketed cover) With motor4,0 KW, 400/690 Volt With variable speed drive(Frequency inverter) With timercheck MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1,5x0,8 M Total height1,4 M Weight300 KG Technical specs Extra informationconical bottom 135 mmDiscountCold mixersMixacoDiscountPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- ...
General SKU094F478 MakeGebr. Ruberg Maschinenfabrik Nieheim LocationBarneveld TypeFCM-200 SR Main Features MaterialStainless steel Volume200 Ltr. Motor11.5 KW Specified Features - Cold mixer Cold mixerBatch barrel mixer (1x) Vessel sizesdia. 650 x 400 mm With motor7,5 kW (400 V, 1500 rpm) Rotor speed35 rpm With lump breakercheck With motor4,0 kW, (400 V, 1435 rpm) Rotor speed1435 rpm MaterialStainless steel 1.4301 (304) Information No.171/11577 Year of construction2001 Mounted on framecheck With switchgearcheck (as is) Floorspace2,1 x 1,5 m Total height2,8 m Weight2350 kgDiscountCold mixersGebr. RubergDiscountPlastic machinery > Cold mixersBrand > Gebr. Ruberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...
General SKU004U068 LocationBarneveld MakeThyssen Henschel TypeTK/D 125 Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume7.5 Ltr. Motor15 KW Specified Features - Cold mixer Cold mixer:Continuous high speed mixer: (1x) Capacity7,5 Ltr Vessel sizesdia. 125mm Max. temperature200 Degr. C. With jacket(2,5 Ltr) With motor15,0 KW + 5,5 KW, 500 Volt (Ex) Rotor speedOuter mixing tool 60-2000 Rpm/Inner 1500 Rpm MaterialStainless steel 1.4541 (321) With jacketcheck General No.850026 Year of construction1993 (has never been used) Mounted on framecheck Floorspace3,5x0,5 M Total height1,0 M ATEX designedcheck Extra Specifications- Easy clean - 2 counter-rotating mixing toolsDiscountCold mixersThyssen HenschelDiscountPlastic machinery > Cold mixersBrand > Thyssen Henschel What you can expect from Foeth: -- Machine is in working condition -- A ...
Refrigerated counter Coldline Master GN 2 for fast and flexible application Model No.: TS13/1M-760 Stainless steel version Cooling range - 2 to + 8°C adjustable Convection cooling Device is plug-in, 2 doors Connection 230V Dimensions: 1300 x 680 x 860 mm, WxDxH Used device
MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230
Refrigerated display case Dilara 180 Convection refrigerated display case 4 stainless steel shelves verst. Sliding doors made of insulating glazing Temperature adjustable from +3 to +15°C Coolant R 290 only DGUV V3 tested by us Measurements; 1800 x 750 x 2000 mm, WxDxH Connection: 230V, 1166 Watt Demonstration device & SAB tested
Glass Bottle Filling Line 1000 bph With Isobaric CICE Careddu Filling Block This CICE Careddu GOLD DPS 6/6/1C is a compact rotary triblock bottling machine integrating 6 rinsing stations, 6 isobaric filling valves, and 1 crown capping head for hygienic packaging of beer in glass bottles. The system ensures controlled counterpressure filling to with air pre-evacuation with CO2 maintaining carbonation and minimizing oxidation during the bottling process. Filling block has Siemens S7 PLC control system. Filling bloc has CIP system for sterilizing equipment inside and outside with 85C hot water. The line contains also rotating infeed table where empty bottles are manually places, CICE Careddu Compatta labelling station for self-adhesive labels. It has a one roll fed label station and it is intended for the application of one label per product, typically used for front labelling, iden ...
Includes roller conveyor (approx. 250cm infeed and 120cm with stop) Adjustable stop with scale Automatic clamping and feed Max. saw blade diameter 400mm Miter cut Coolant pump Documentation 400V
Used Used krones 2 cold glue station labeller: Year: 1992 Condition: As Is Model: Prontomatic 720-12-480-6-4-180 Year: 1992 Speed: 10.000 bph 1l Direction of rotation: Clockwise Number of plates 12 Number of glue stations: 2 Labeling type: ? Cold glue Types of applicable labels: ? Front label ? Back label ? Neck Plate movement system: Mechanical cams Type of bottle: glass bottle Safety protections Code: EA 694 More details: https://bottlingscout.com
Used Used Kube adhesive and cold glue labeller: Year: 2016 Condition: As Is Model: ROTARY LABELLER Year: 2016 Speed: 3000 bph Rotative Clockwise 5 electronic cam plates 3 adhesive station, 1 cold glue station Applicable label types: - Self-adhesive neck label - Self-adhesive front label - Self-adhesive back label - I ? L ? U tax seal with cold glue Crimping device for L seal and U seal Optical centering - Electronic with fixed photocells - Label presence control Safety protection Code: EA 699 More details: https://bottlingscout.com
complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum ...
New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...
1 ALLIANCE sample high temperature jet dyeing machine, type Baby Jet, capacity 4 to 10 kg (according to the weight and composition of the fabrics), year 1996, maximum dyeing temperature 140 ºC, machine equipped with filter, TCA 200 dye cycle controller, winch is inverter controlled (OMRON), with addition vat, Machine delivered fully erected ready to connect to media (no cables and no pneumatic pipes a disconnected for the transport
2626 OMAX JetMachining Center Water jet system The machine has been completely overhauled and has very few operating hours. Machine type 2626. Size LxWxH 106х77х96. INNOMAX desludging system, OMAX EnduroMAX pump P5060 and INNOMAX abrasive conveying system also included. High-precision premium waterjet cutting The first-class OMAX JetMachining® Centre was developed for advanced systems, where performance and results are paramount. The OMAX JetMachining Centre is a true hard worker for production in any manufacturing environment and delivers: - Manufacturing high-precision multi-axis parts quickly and consistently with OMAX IntelliMAX® software - Improved efficiency with EnduroMAX® pumps that deliver the highest nozzle performance - Reduced maintenance with durable and hardwearing materials - Increased uptime through improved IntelliVISOR® system monitoring - Better end ...
Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -
Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000
General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm Jet Mills MaterialStainless steel 1.4306 (304L) Information MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsMicromacinazioneMills > Jet MillsBrand > Micromacinazione What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU223Y099 LocationBarneveld MakeAlpine Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) With variable speed drivecheck With jacketcheck Jet Mills MaterialStainless steel 1.4541 (321) General TypeAFG-100 Year of construction1985 Mounted on wheelscheck With switchgearcheck Floor space1,70 x 1,10 m Total height2,40 m Extra SpecificationsWith K-Tron dosing screw, type T20A, 0.25 kW:Becker vacuum pump:Alpine stainless steel filter, type K6R, 2.4 m²:with spare rotors and parts:Jet MillsAlpineMills > Jet MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible.
General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck With jacketcheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 ...
General SKU286M327 LocationBarneveld MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm With jacketcheck Jet Mills MaterialCeramic, Mild steel General No.:unknown, manufacturer tag is missing: Year of construction±2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...
General SKU286M326 MakeALPINE A.G./ Henco & Co. TypeATP200 / 4ATP No.unknown, manufacturer tag is missing Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill GrinderMulti-wheel air classifier Mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel Information LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU286M325 MakeALPINE A.G./ Henco & Co TypeATP200 / 4ATP No.manufacturer tag is missing Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill GrinderMulti-wheel air classifier mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel Information Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
The industrial inkjet printer EBS Ink-Jet EBS-230 was produced in 2014. The printer allows for contactless description of various objects that move, for example, on the frame of the fiber laser or on the production conveyor, etc. It is a large-scale printer (6-116 mm, DOD technology). The printer guarantees a legible and durable print on paper, cardboard, plastics (also so-called porous), on fabrics, leather and imitation leather, wood and wood-like products, on ceramic products (also so-called porous), as well as on various types of surfaces metal, etc. An industrial printer of this type is a so-called adapter for another device. It is mounted, for example, at a laser head or an industrial plotter, which cuts elements, while the printer immediately marks them. Technical specifications : - the height of the prints: 6-12.8 with a 7D head (the height of the letter is adjusted by twisti ...
The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.
The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.
The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min. ...
The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...
Colour JET 2 Paint mist extraction Rated motor power: 0,75 / 2,1 kW Engine speed: 96 min 0/1,430 Air volume: 3,000 / 6,800 m ³/h Effective pressure: 400 / 500 PA Dimensions closed (W/H/D): 1,012 x 1.405 x 943 mm Folded dimensions (W/H/D): 1,897 x 1.405 x 1,166 mm Pre-and fine filter filter area: 1 m² Connection diameter: 300 mm Switch zweistuftig Compact construction, space-saving Powerful, high suction power,. low operating costs Easy maintenance, long filter life Universally applicable, variable accessories High flexibility Mobile design Suction technology with front plate system G & ALKO 19562801
JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T
The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.
The CE125 series is an electrically driven high-pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.
The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
maximum number of results exceeded
please refine your search
