cold circular saw used for sale

Metal band saw blade, band saw blade, metal saw band -Metal saw band: SG 2/3P x 0.9 unused -Length: 4115 mm -Weight: 1.2 kg

Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg

Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs

cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional

Hacksaw, hacksaw machine -Hoop saw: electric, with coolant system -Type: unfortunately no type designation -Power: 0.55 / 0.75 kW -Max. cutting height: approx. 145 mm -Max. cutting width: approx. 180 mm -Saw blade: Length approx. 325 mm -Machine dimensions: 800/700/H1520 mm -Weight: 224 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: max. 1335 mm, adjustable -Roll: Ø 25 x 350 mm -Dimensions: 550/520/H970 mm -Weight: 13 kg

Table saw, aluminum profile saw -2x saw: Wegoma TS 250 -Fixed cutting distance: approx. 450 mm -Saws: individually or simultaneously controllable -with: foot switch -Saw blade: Ø 250 mm -Voltage: 220/380 V -Saw motor: 0.75 kW -Dimensions: 850/790/H1660 mm -Weight: 234 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Flex reciprocating saw: SK -Nominal power input: 1200 W -in :suitcase -Dimensions: 610/120/H250 mm -Weight: 5.8 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Leuco, saw blade type topline Ø 390 mm -Inner diameter: 35 mm -Number of teeth: 96 -Quantity: 2x saw blades included -Price: per piece -Dimensions: Ø 390 x 3 mm -Weight: 2.2 kg/piece

Metal band saw blade, band saw blade, metal saw band -unused in: original packaging -Dimensions: 2625 x 20 x 0.9 mm -Toothing: 6/10 ZpZ W -Price: per piece -Number: 7 pieces -Weight: 0.4 kg/piece

SPECIFICATIONS: Workspace: Horizontal cutting length mm: 6000 Vertical cutting height mm: 2200 Workpiece height mm: 78 Saw blade diameter mm: 300

Saw blade, wood saw blade, circular saw blade -0040 420 30 -Ø: 420x3.5/3.00x30 -Z96: T 13.74 -n max.: 4300 -0317-1114700 HW -Price: per piece -Number: 3x available -Weight: 3.5 kg/piece

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: 850 - 1500 mm adjustable -Roll: Ø 80 x 840 mm -Plate below: Ø 480 mm -Price: per piece -Number: 2 pieces -Dimensions: 915/480/H850 mm -Weight: 44 kg/piece

SPECIFICATIONS: Diameter of flywheel mm: 800 Installed capacity KW: 3.3 Made entirely of cast iron Complete with saw blade clamping device

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

Metal band saw blade, band saw blade -unused original packaging -Number: 7x sheets available -Price: per piece -Toothing: 4/6 K-POS -Dimensions: 2835/27/H0.9 mm -Weight: 0.6 kg/piece

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 3x sheets available -Toothing: 8-12 ZpZ -Dimensions: 2950 x 27 x 0.90 mm -Weight: 0.9 kg/piece

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 5x sheets available -Toothing: 5-8 -Dimensions: 4500 x 34 x 1.10 mm -Weight: 1.3 kg/piece

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.

Clamping angle for workpiece clamping -Thickness: 15 mm -Surface: milled -Dimensions: 270/105/H115 mm -Weight: 6 kg

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll width: 295 mm -Dimensions: 480/420/H845 mm -Weight: 12.8 kg

Saw roller stand, saw roller stand, saw stand, roller conveyor stand -for: hacksaw, bandsaw, cold circular saw -Roller height: adjustable from 845-1350 mm -Roller width: 300 mm -Dimensions: 480/420/H845 mm -Weight: 9 kg

Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.

- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation

dimensions of saw-band: 3650x27x0,9 mm speed: 15-100 m/min vice: 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1.105 kg dimensions: 2700x2300x1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic- ...

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

Metal band saw blade, band saw blade -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm

Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm -Speeds: 90-4000 rpm -Cutting width: 710 mm -Saw blade diameter: max. 260 mm -Max. Cutting height: 40 mm -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Saw blade, wood saw blade, circular saw blade -DB 05/01 -Ø 200x6.0x60 -Z24 -n max. 9500 -Price: per piece -Number: 1x available -Weight: 1 kg/piece

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Saw blade, wood saw blade, circular saw blade -0402-5021202 HW -UFN - equipped -Ø 200x4.1/2.8x65 -Z36 = T 17.44 -n max. 9000 -Price: per piece -Number: 2x available -Weight: 0.7 kg/piece

Saw blade, wood saw blade, circular saw blade -04 43 184 -Ø 180x4.0x60x28 -n max. 9600 -Price per piece -Number: 1x available -Weight: 0.7 kg/piece

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Saw blade, wood saw blade, circular saw blade -SK-1130 AA -Ø 250x4.0/2.8x70x24 -n max. 7500 -Price: per piece -Number: 1x available -Weight: 2 kg/piece

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg