cold circular saw used for sale

Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible.

Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible.

A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible.

8-digit rotary machine, make Breitner, type IDR 2885, year of manufacture 1985, With template – pressure vessel,, Filling range: 10 - 10,000 ml,, Connected load: 4 kW, Used for delicatessen + mustard (200 + 250 ml - jars)

An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026.

Stock number: D1242, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: 4 pcs. legs, Motor: 0,18 kW - 220/380 Volt, Tabletop diameter: Ø 1200 mm, Tabletop material: Plastic, Total height: H 1200 mm

cutting capacity: 2,5 mm mm throat: 750 mm round blank diameter max.: ca. 1500 mm weight of the machine ca.: ca. 800 kg includes on set of new replacement tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HAULICK Roll Sheet Shears / Circular Knife Shears -Max. sheet steel: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Cutting blade diameter: approx. 120 – 150 mm - Table size: approx. 500 x 250 mm -Projection / feed range: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: Belt drive -Straight cuts -Strip cutting -Endless cutting of metal sheets -Sheet steel up to approx. 2.5 mm -Aluminium and non-ferrous metals correspondingly stronger Dimensions: LxWxH 0.6x0.9x1.1 meters / Weight 180Kg

Offer 26163 Technical data approx : - Max. workpiece diameter 80 mm - Projection 70 mm - Welding torch tripod adjustable in X, Y, Z - Tripod method by handwheel 500 mm - Projection tripod 70 mm - Center width 600 mm - Tailstock with pneumatic pressure tip - 3 jaw chuck 100 mm - Handheld remote control - Connection cable - Pneumatic connection - Table base W 2000 x H 850 x D 700 mm - Space requirement approx. W 1150 x H 650 x D 500 mm - Weight approx. 200 kg

A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, feed X/Z: 8m/min, workhead spindle taper: MK4, tailstock taper: MK4, tailstock quill travel: approx. 35mm, grinding wheel dimensions: 400mm/50mm/127mm, grinding spindle speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. internal grinding wheel diameter: 100mm, filter volume: 300l, filter capacity: 100l/min, chuck diameter: 160mm, operating hours: approx. 350h. Including chuck, magnet and dressing device. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

Circular vibratory feeder manufactured by Rodant, model AV-50, second hand. The equipment is mounted on an aluminum structure. Technical characteristics Model AV-50 Year of manufacture 2007 Motor 220 V 50 Hz No documentation In your state

: ca. 12 - 14 Wochen ab Auf : Türkei : 21400 € : 5 mm : 1200 mm : 4,1 m/min : 3000 mm : 750 mm : 1400 mm : 1350 kg : 250 / 2000 mm : 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment (prices on request): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: - mm throat: - mm round blank diameter max.: 500 mm round blank diameter min.: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 13900 € : 266.88 € : 3.5 mm : 750 mm : 2.2 kW : 6,1 m/min : 2000 mm : 600 mm : 1400 mm : 750 kg : 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7500 € : 144.75 € : 2 mm : 700 mm : 1.1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT (PRICE ON REQUEST): pneumatic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DISKUS DD 300 So ist eine Doppel-Planschleifmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Werkstückhöhe max. 80 mm; 2 Schleifköpfe; Schleifscheibe Ø außen 300 mm, Ø innen 233 mm, Breite/Höhe 50 mm; waagrecht; Mitnehmerscheibe Geschw. 29,6–192 mm/s. Technische Daten: Schleifscheibendrehzahl von 1530 t/min bis 24 m/s; Spannung 380 V; Gewicht ca. 2500 kg; Abmessungen L3050×B1400×H1600 mm. Zubehör: Messgerät PRETEC. Erreicht enge Toleranzen; geeignet für präzisionsorientierte Branchen (z. B. Automotive, Werkzeugmaschinen, Luftfahrt, Medizintechnik, Uhrmacher). Technische Daten ohne Gewähr

DISKUS DD 400 II CRM ist eine Doppel-Planschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Werkstückhöhe max. 80 mm; Schleifbreite 40 mm; Schleifscheiben Ø außen 400 mm, Ø innen 250 mm; Breite/Höhe 50 mm. Drehzahlen 135–1435 t/min (Umf. 24 m/s) und links 1150 t/min (3–30 m/s); Vorschub 26–246 mm/s; 380 V; install. Leistung 30 kW; Gewicht ~4200 kg; Maschine 3300×2600×2300 mm; Elektroschrank 1800×400×2000 mm. Zubehör: Kühlmitteleinrichtung, Abrichtvorrichtung, Messgerät IONIC, Werkstücklader, automatische Be-/Entladeeinrichtung, Satz Schleifscheiben, Lampe. Erzielt enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugmaschinenbau, Medizintechnik und Uhrenbranche. Technische Daten ohne Gewähr

DISKUS DDS 457 II CRA ist eine Doppel-Planschleifmaschine mit 2 gegenüberliegenden Schleifscheiben, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsbereich: Werkstückdurchmesser 5–60 mm, max. Höhe 1–20 mm; zwei Schleifköpfe doppelseitig (oben, unten). Technische Hauptdaten: Schleifscheiben Ø457×B75 mm, Aufnahmebohrung 76 mm; feste Drehzahl 753 t/min, Umfangsgeschw. 18 m/s; Spannung 380 V; Schleifmotoren 2×15 kW; install. Leistung 33 kW; Gewicht ~5000 kg; Abmessungen L4000×B3000×H2700 mm. Eignet sich für enge Toleranzen in Automobilindustrie, Luftfahrt, Maschinenbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

DISKUS DDS 600 ist eine Doppel-Planschleifmaschine mit 2 gegenüberliegenden Schleifscheiben, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Werkstückdurchmesser 120 mm, max. Werkstückhöhe 50 mm; 2 Schleifköpfe, doppelseitig (oben, unten); Segmentscheibe Außendurchmesser 600 mm, Breite/Höhe 75 x 150 mm. Technische Daten: Schleifscheibendrehzahlen ab 765 t/min (entspricht 24 m/s), Spannung 380 V, Maschinengewicht ca. 6500 kg; Abmessungen L 3410 x B 3370 x H 3100 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

Lg.Nr. 26248 Technical data: - For bases / discs up to approx. 4 corner sheet Ø 1200 mm - For bases / discs up to approx. 8 corner sheet Ø 1500 mm - Knife body projection 240 mm - Projection guide bar 900 mm - Max. cutting capacity at 45 Kp/mm² 4.0 mm - Drive speed infinitely variable 6 to 30 m/min - man. Material clamping + man infeed of the knife - Drive 400 V / 3.00 kW - E. footswitch - Space requirement approx. W 2450 x H 1700 x D 950 mm - Weight approx. 1300 kg

Paolo Orizio TBE/C circular knitting machine Year of manufacture: 1999 Fully rebuilt by Canmartex in 2012 Serial number: 1024610 Cylinder diameter: 15\" (381 mm) Gauge: 24 Number of needles: 1,120 Number of feeds: 4 Needle type: VO 7950 G0011 Power supply: 380 V, 3-phase, 50/60 Hz Power: 5.5 kW Full load current: 16 A CE marked Overall dimensions: approx. 1,500 x 1,200 x 2,200 mm Equipped with Orizio control system Small-diameter circular knitting machine Made in Italy Auction-ID: A1-49879-7

Jumberca SLM 3 circular knitting machine. Manufacturer: Jumberca Model: SLM 3 Made in Spain (Badalona). Cylinder diameter: 30\" (762 mm). Gauge: 18. Number of needles: 1,728. Groz-Beckert cylinder needles: Vo-Ls 136.52 G001, G002, G003 and G004. Equipped with Kübler production counter. Power supply: 380 V, three-phase. Approx. overall dimensions (L x W x H): 2,700 x 2,000 x 2,700 mm. Auction-ID: A1-49879-5

Jumberca SJM-3 circular knitting machine. Made in Spain. Year of manufacture: 1991. Machine no.: 102. Cylinder diameter: 30\" (approx. 762 mm). Gauge: GG24. Number of needles: 2,304. Operating speed: approx. 24 rpm. Electrical supply: 380 V, three-phase. Equipped with Toshiba 400 V frequency inverter. Kübler production/hour counter. Memminger-IRO Pulsonic 3 Mini central lubrication system. Square D start/stop controls. Fabric take-down system with chain and sprocket drive. Approx. overall dimensions: 2,700 x 2,000 x 2,700 mm (L x W x H). Machine offered in its current condition. Auction-ID: A1-49879-11

Mayer & Cie. MV 1 single jersey circular knitting machine. Made in Germany. Serial number: 40711. Cylinder diameter: 914 mm (36\"). Gauge: 28 E. Needle pitch: 0.91 mm. Number of needles: 3,168. Single track configuration. Equipped with Phototex FM8 optical fabric scanner for hole and tear detection. Senso+ central lubrication system with 5 L reservoir. Air filter-regulator system. Equipped with three Hengstler production counters. Power supply: 380 V, three phase. Machine presented in used condition. Auction-ID: A1-49879-10

Manufacturer: Mayer & Cie. Model: OVJA 1.6 E Machine type: Double Jersey Electronic Jacquard Circular Knitting Machine Year of manufacture: 2004 Machine / Serial number: 56535 Country of manufacture: Germany CE marked: Yes Nominal cylinder diameter: 660 mm (26\") Gauge: 20 E Needle pitch: 1.27 mm Number of cylinder needles: 1,638 Number of feeders: 42 Electronic single-needle selection in the cylinder Mayer & Cie. electronic control panel Operating voltage: 380 V Control voltage: 24 V Frequency: 50 Hz Power: 4.0 kW Electrical diagram no.: 191353.2 Approximate overall dimensions (L x W x H): 2,700 x 2,000 x 2,700 mm Machine weight: Not available Suitable for the production of double jersey electronic jacquard fabrics, including spacer fabrics, needle plush and double-layer fabrics with lay-in yarn. The approximate overall dimensions are based on inf ...

Mayer & Cie. RELANIT S single jersey circular knitting machine. Machine no.: 34554. Made in Germany. Nominal cylinder diameter: 762 mm / 30\". Gauge: 28 E. Needle pitch: 0.91 mm. Number of needles: 2,664. Number of feeders: 48. Power supply: 380 V / 50 Hz. Approx. dimensions (L x W x H): 2,700 x 2,000 x 2,700 mm. Machine weight according to available machine information: 2,890 kg. Equipped with Reivax DC-3 fabric defect detector. Equipped with Oli-Fox central lubrication system. Equipped with Autonics FX4S counter. Suitable for fine single jersey fabrics and delicate yarns. Machine manufactured before 1990; exact year of manufacture not confirmed. Machine offered in used condition. Auction-ID: A1-49879-2

Jumberca MIL double jersey circular knitting machine. Year of manufacture: 2000. Serial number: 6858. Cylinder diameter: 33\" (838.2 mm). Gauge: 18. Number of needles: 1,860 + 1,860 (cylinder and dial), 3,720 needles in total. Maximum speed: 20 rpm. Maximum air pressure: 6 bar. Installed power: 8.4 kW. Electrical connection: 380 V, 50/60 Hz. Machine weight: 2,890 kg. Approx. overall dimensions (L x W x H): 2,900 x 2,200 x 2,800 mm. Equipped with Memminger-IRO Pulsonic 5.2 central lubrication unit. Pulsonic lubrication unit manufactured in 10/2007. CE marked. Made in Spain. Auction-ID: A1-49879-3

Paolo Orizio JO/5 circular knitting machine, made in Italy. Machine serial number: 108813364. Cylinder diameter: 30\" (762 mm). Gauge: 20. Number of needles: 1,860. Number of feeds: 72. Cylinder serial number: 04871290. Needle types: VO 15752 T02SA, VO 15752 T03SA and VO 15752 T04SA. Sinker type: L7 22601. Equipped with positive yarn feeders and yarn stop motions. Needle detector and hole detector systems. Uniwave mist oil lubrication system. Approximate overall dimensions: 2,700 x 2,000 x 2,700 mm (L x W x H). Includes control cabinet and yarn feeding system. Used industrial machine with visible signs of use and wear. Auction-ID: A1-49879-6

Paolo Orizio JSV-R circular knitting machine. Made in Italy. Cylinder diameter: 30\" (762 mm). Gauge: 20. Number of needles: 1,856. Number of feeders: 44. Cylinder serial number: 02910188. Needle type: VO 12362 G02. Sinker type: 3110-2-146/206 108. Power supply: 380 V, three-phase. Orizio control panel with hour meter. Elap production counter. IG455 tachometer with speed control. Warning indicators for gate open, needle breakage, motor drive fault, yarn input/output stops, oil/air, end of cycle and photoelectric cell. Uniwave mist lubrication system. Stepped pulley drive. Approx. overall dimensions: 2,700 x 2,000 x 2,700 mm. Machine serial number: 109116063. Auction-ID: A1-49879-9

Paolo Orizio FI-HN circular knitting machine. Serial number: 11862780. Cylinder diameter: 30\" (approx. 762 mm). Gauge: 20. Number of needles: 1,860. Number of feeders: 96. Needle types: VO 15752 T02, VO 15752 T03 and VO 15752 T04. Sinker type: 209225000. Positive yarn feeding units. Control panel with mains, warning and detector indicators. Two-row counter with preset. Power supply: 380 V, three-phase. Approx. dimensions: 2,700 x 2,000 x 2,700 mm. Made in Italy. Auction-ID: A1-49879-8

Jumberca SYX2 circular knitting machine. Manufacturer: Jumberca Model: SYX2 Serial number: 988 Year of manufacture: 1990 Made in Spain Cylinder diameter: 30\" (762 mm) Gauge: 18 Number of needles: 1,728 pcs Power supply: 380 V, three-phase Transformer voltage taps: 200 / 220 / 380 / 415 / 440 V Equipped with Memminger-IRO LMW 3 yarn feed control unit Positive yarn feeders with yarn stop motions Speed adjustment by stepped pulleys Approx. overall dimensions (L x W x H): 2,700 x 2,000 x 2,700 mm Machine weight: not available CE marking: not confirmed Auction-ID: A1-49879-4

Weight range bun approx.: 50-100gr Capacity: 2 rows approx. 2400 pcs/h with 4 pairs of cups (diameter approx. 12/13cm) weights approx. 85-100gr Tested and cleaned immediately available - Ribbons new

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-79

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-34

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-78

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-75

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-74

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-80

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-76

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-73

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-77

AGICOM recycling machines: Used vibratory screen 1200 ECOSYSTEM, overhauled by the manufacturer. Working diameter approx. 1200 mm. Perforated screen thickness: 0.800 mm Completely made of stainless steel Icon Video

Softwood semi-circular post with a diameter of 100 mm and a length of 200 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45106-2263

Softwood semi-circular post with a diameter of 100 mm and a length of 200 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45106-2264

Softwood semi-circular post with a size of ø80×2000 mm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), making the pole suitable for outdoor applications and has increased durability. Auction-ID: A1-45106-2265

Softwood semi-circular post with a diameter of 80 mm and a length of 250 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45106-2266

Softwood semi-circular post with a diameter of 80 mm and a length of 300 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45106-2267

Maximum Ø 1000mm, including inverter, connection: 230 volts Auction-ID: A1-49889-234

Output: 1400mm, equipped with welding turntable ø 980mm. Including 1x sheet size ø 1830 x 30mm Auction-ID: A1-49889-249