coil winding used for sale

workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a completely brand-new, unused industrial pump of the absolute top class: a KSB Etabloc (model: ETB 065-040-200 GGSAV11D200752) in a compact block design, directly coupled to a highly efficient 7.5 kW Siemens energy-saving motor. The KSB Etabloc series is the global benchmark for reliability, ease of maintenance and space savings in industrial use. Since it is a block pump, the impeller sits directly on the extended motor shaft. This saves valuable installation space and makes the time-consuming, millimetre-precise alignment of the coupling completely superfluous – set up, flange, connect, run. Thanks to the large 200 mm impeller and the powerful 7.5 kW motor power, this unit is perfect for demanding applications with higher heads and pressures (e.g. in industrial water supply, cooling systems, air conditioning systems or process engineering processes). Highlights  ...

wire diameter 0,5- 2 mm

A complete Tridan fin press line is offered for the automated production of aluminium fins (fins) for heat exchangers, condensers and radiators. The installation has been installed in working order as stated and is offered including the existing tooling, automatic supply and removal and approximately 8.5 tons of aluminum coils. The line consists of a Tridan Tool & Machine Inc. fin press, model RLB45E-30-22-4 (380 V, 3-phase, 50 Hz, 23 A), a Tridan coil feeder/decoiler, a mounted die (Tridan RDVS10R1H81.25 1.08), an automatic discharge and stacking unit and the existing aluminum coils. The coils consist of EN AW-8006 H22 aluminum and contain a total of approximately 8,500 kg of material, divided over several rollers. The machine is designed for stamping and forming aluminum fins in a continuous production process, where the coil is automatically feeded, the fins are pressed, and then au ...

Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min

A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available.

TONGS:. - capacity:35000 kg - Gripping range:2000 mm - Tare weight:2530 kg ELECTRICAL SPECIFICATIONS:. - total power consumption:3 kW - mains voltage:400 V - mains frequency:50 Hz

TONGS:. - capacity:35000 kg - Gripping range:2000 mm - Tare weight:2665 kg ELECTRICAL SPECIFICATIONS:. - total power consumption:1.1 kW - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:2770 mm - space requirements width:1700 mm

material width:150 mm coil weight:1,5 t coil internal diameter:500 mm coil external diameter:940 mm strip material:20 x 1,0 - 50 x 4,0 / 200 x 2,0 mm wire diameter:1,0 - 5,0 mm power requirement:0,7 kW weight:0,7 t Dimensions (WxDxH):1,0 x 1,7 x 2,0 m palett decoiler:motoric driven

Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min

material width:350 mm coil weight:2,0 t coil internal diameter:470 - 530 mm coil external diameter:1500 mm power requirement:1,0 kW weight:1,5 t dimensions (WxDxH):1,3 x 1,6 x 1,9 m

material width:300 mm coil weight:0,5 t coil internal diameter:270 - 360 mm coil external diameter:1000 mm weight:0,3 t dimensions (WxDxH):1,5 x 1,2 x 1,4 m

material width:300 mm coil weight:0,5 t coil internal diameter:420 - 520 mm coil external diameter:1400 mm weight:0,6 t dimensions (WxDxH):0,8 x 1,2 x 1,7 m expansion:pneumatic

Stainless steel bar belt for Technopool spiral cooler Length (linear metres): approx. 260 - 280 m Total width: 900 mm Working width: 760 mm Distance between rods: 30 mm Availability: as of now

ZM CNC microfeeder 800 x 1 mm

Type: R674/11/F 11 x 50 mm straightening rolls 4 80 mm feeding rolls Weight: 1200 kg

max width: 1000 mm

ZM straightener 800 x 1 mm

Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis

CONTROLS   PLC SIEMENS S5 115U OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 140 mm   sheet thickness max.: 6 mm   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to   stroke: 500 mm DECOILER   design: single reel   sheet width max.: 300 mm   coil weight max.: 3 to   max. diameter of coil: 1300 mm   mandrel expansion range from: 360 mm   mandrel expansion range up to: 430 mm LEVELLER UNIT   sheet width max.: 140 mm   sheet thickness max.: 6 mm   sheet thickness min.: 3 mm   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   feed velocity max.: 43 m/min ELECTRICAL SPECIFICATIONS   total power consumption: 35 kW KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 16 mm   coil weight max.: 8 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 8 to DECOILER   max. diameter of coil: 1800 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm CROP SHEAR   cutting force: 800 kN LEVELLER UNIT   sheet width max.: 800 mm   sheet width (min): 80 mm   sheet thickness max.: 16 mm   sheet thickness min.: 1.5 mm   material cross section max. (450 N/mm2): 3510 mm²   number of leveller rolls: 17 Price of new equipment 1.46 Mio EUR

CONTROLS   PLC SIEMENS S7 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 260 mm   sheet thickness max.: 6.5 mm   coil weight max.: 3 to   feed velocity max.: 20 m/min   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 3 to DECOILER   design: single reel, traversable   sheet width max.: 260 mm   coil weight max.: 3 to   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet thickness max.: 6.5 mm   material cross section max. (450 N/mm2): 1500 mm²   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   loop controls: yes decoiler KOHLER, type 3000.1 with coil-chair straightening machine KOHLER, type KRM 50.260/2 transfer bridge 6970 mm, hydraulic operated

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

Properties Volume 12850 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4600 mm Height 2000 mm Diameter 2400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C Description Topsoil: Clapper bottom Downward-swept filling line DN50 CIP Cleaning Pressure fitting Tank cylinder: Cooling coil Ladder hooks Sample tap 5/8" Clear drain with threaded weld-on nozzle DN65 Level Indicator - Hose Subsoil: Clapper base 60° with cooling pipes Residual drain thread neck DN32 Conical flange DN 600 with outlet DN80 with disc valve 4 profiled feet with calottes height-adjustable

Stainless Steel Cooling Coil Second Hand Item DIN32 Male Fittings Diameter is 55.5cm x 49cm Overall Height - 64cm Overall Width including fittings pipework is 70cm This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk

Maximum payload 10,000 kg Unladen weight 4,500 kg

Ungerer 1800 x 5 mm Max sheetwide: 1800 mm Max sheetthickness: 0,7 > 5 mm Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power : 28 HP Weight: 9,7 ton

Dimeco afwikkel-/terugwikkelapparaat Dimeco microvoeder - maximale breedte: 815 mm - maximale dikte: 3,5 mm

Ungerer RP 1500 x 3 mm Max sheetwide: 1500 mm Max sheetthickness: 3 mm

Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW

CONTROLS    SIEMENS S5 DECOILER   sheet width max.: 370 mm   sheet width (min): 80 mm LEVELLER UNIT   sheet thickness max.: 2.5 mm   sheet thickness min.: 1 mm ELECTRICAL SPECIFICATIONS   mains frequency: 50 Hz

Solenoid coil, stop solenoid, pull solenoid, ejector solenoid, stop solenoid, locking unit, solenoid valve coil -Manufacturer: Parker, solenoid valve coil, solenoid coil unused -Type: AK-D1VW-C-SW-75-X610 AK-D1VWCSW75-X610 -Voltage: 48 VDC -Number: 295x magnetic coils available -Price: per piece -Dimensions: 68/45/H54 mm -Weight: 0.4 kg

Solenoid coil, stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Parker, solenoid valve coil Solenoid coil unused -Type: AK-D3W-S-SW-30-610 MSM-H1 -Voltage: 48VDC -Number: 5x magnetic coil available -Price per piece -Dimension: 90/62/H72 mm -Weight: 1.0 kg

Connectors, plugs, terminal plugs, coil plugs, Fast-On connectors, cable connectors, wired connectors, magnetic coils -Manufacturer: Castel, magnetic coil cable connector wired connector -Type: 9900/X66 -Connector: Fast-On connector -Number: 9 cable connectors available -Price: per piece -Packaging dimensions: 140/120/H35 mm -Weight: 0.1 kg/pc

solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid coil unused -Type: 0256 A 4.0 NBA 00 -ID-No.: 00061150 voltage. 18-33 V -Quantity: 15 pieces available -Price: per piece -Packaging dimensions: 190/120/H50 mm -Weight: 0.4 kg/piece

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 2100 mm   total height: 2200 mm   total weight approx.: 1570 kg - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Dimeco 1675/D richtmachine met CNC-aanvoersysteem (cybelec) - breedte: 500 mm - maximale dikte: 1,6 mm

CONTROLS   electronic controls OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 200 mm   sheet thickness max.: 4.5 mm   coil weight max.: 0.5 to DECOILER   coil weight max.: 0.5 to   mandrel expansion range from: 250 mm   mandrel expansion range up to: 550 mm LEVELLER UNIT   sheet width max.: 300 mm   sheet width (min): 20 mm   sheet thickness max.: 4 mm   sheet thickness min.: 0.5 mm   material cross section max. (450 N/mm2): 800 mm²   number of leveller rolls: 7   diameter of leveller rolls: 65 mm   number of infeed-/outfeed rolls: 4   diameter of feed rolls: 65 mm   drive power: 1.5 kW   loop controls: yes ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz

overhauled wire diameter 2,0-9,0 mm spring diameter 10-120 mm feeding length unlimited output pieces/min 90

wire diameter 0,5-6 mm spring diameter 20 mm feeding length  output pieces/min 80

wire diameter 0,5-6 mm spring diameter 20 mm feeding length  output pieces/min 80

wire diameter 1-5 mm feeding length 2400 mm output pieces/min 150

wire diameter 0,8-5 mm spring diameter 50 mm feeding length  output pieces/min 50