co ex used for sale

4 roughly identical packaging machines for the packaging of individual mozzarella balls with whey in a saleable Plastic packaging. Manufacturer: m+b Avvolgitore wrapping machine Type: ENO expert 2.0-easy Machine No. (standing in the room) S158807, Year of Build 2015, 343 kg 230 VAC; 50/60 Hz; 1+N/PE 6 A; 10 kA RMS Sym; 7 bar How this vertical Flow wrapping machine: The mozzarella ball is placed over the filling tube (as a ball) with the brine in the bag dosed. This is done with the help of special liquid dosing systems that both the cheese portion as well as the exact amount Pour in liquid in a controlled manner. Then the bag is placed at the bottom welded, then filled, and finally on the upper end closed again. The finished Bag is cut off below the weld. Output approximately: 7,000 bullets in 1 hour.

A Kilia bowl cutter is available. Knife shaft speed levels: 2, bowl speed levels: 2, bowl volume: 65l, knives: 6. The mixing cycles of the machine are non-functional. An on-site inspection is possible.

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 200 mm high: 1150 mm weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,8 x 0,73 x 1,3 m incl. charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping Force: 200 ton

1 hydraulic double-column press, manufactured by Exner, type EX80SB, built in 1987, power 15 kW, pressing force 800 kN, GG 5,300 kg, overtravel 38 mm Find more here - / Contact us at -

1 press system, manufacturer Exner, type EXSBZRD 500/100, built in 2002, drive power 121 kW, pressing force 5,000 kN, overhauled in 2018, stroke length max. 600 mm, working speed max. 16/30 mm/s, machine weight 82,000 kg, table size approx. 1,000 x 3,000 mm, control system, manufacturer Siemens, type Simatic Multipanel, separate two-hand control, upstream light barrier, manufacturer Sick, separate control panel, manufacturer Rittal, control system, manufacturer Siemens, type OP17, feed unit, manufacturer AMT, type WV400/160, year of manufacture 2008,control panel, control unit, manufacturer Rexrodt, separate switch cabinet system, additional transfer unit/material feed, vertical material buffer, 6-fold feed-through unit, oiling, manufacturer Ratiol/Stöber Find more here - / Contact us at -

1 hydraulic double-column press (11), manufacturer: Exner, type EX100SBZR, built in 1988, power 42 kW, pressing force 1,000 kN, GG 11 Exner, type EX100SBZR, built in 1988, SN 10094, power 42 kW, pressing force 1,000 kN, GG 11,000 kg, overtravel 26 mm, table size approx. 900 x 1,100 mm, swivel chair, separate control panel, control system, manufacturer Siemens, touch panel, two-hand operation, manufacturer Sick, type XY2SB, front material feed, linear travel, approx. 1,000 mm Find more here - / Contact us at -

From a current recycling we offer you various bakery furnishings including baking proofer, bread slicer, freezer, stainless steel sink. Year of manufacture: various (including 2014/2015) First registration: / Condition: used. Functionality cannot be guaranteed Hours: / Asking price: 5.000,00 Euro VHB Factory Price: Equipment / accessories / other information: Back proofer, 15 chairs, bread slicer, stainless steel sink, freezer, filter proofer, POS system screen, cream climate cabinet Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 63607 Wächtersbach The sale is without warranty Subject to prior sale

Manufacturer: EXNER Model: PG 80 Year of Manufacture: 2014 The EXNER PG 80 is a four-column hydraulic tool testing press for testing stamping, forming, embossing, and drawing tools. It is designed for high precision and durability, with modern proportional hydraulic control and digital force display for tool setup and testing. Technical Data Press Ram - Number of press cylinders: 2 pcs - Nominal force (adjustable): 2 × 400 kN - Return force: 2 × 150 kN - Stroke: 350 mm - Ram width: 2100 mm - Ram depth: 840 mm - Guide length: 750 mm - Ram speed under load (100%): approx. 0–10 mm/s - Ram return speed: approx. 0–20 mm/s - T-slots (DIN 650): 18 mm - T-slot pitch: 150 mm Installation Space - Installation height (top to bottom): 550 mm - Table width: 2100 mm - Table depth: 840 mm - Table T-slots (DIN 650): 18 mm - T-slot pitch: 90 mm - Table passage (W×D): 1300 × 120 mm (to be  ...

General SKU254W461 LocationBarneveld MakeExakta Pack TypeExa AF 25 No.105-20171-002-1014 Year of construction2014 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Auger fillercheck Bag fillercheck With screw dosingcheck Number of dosing heads:1 Screw diameter15 mm With motor1,5 kW, 230 volt With hoppercheck Hopper sizesDia. 500x500 mm With mixer in hoppercheck With conveyor beltcheck Information Mounted in framecheck With switchcheck Weight250 kg CEcheck Floorspace0,90 x 1,10 m Total height2,35 m Extra SpecificationsWith mobile packaging unit: type: Exa compacta 330. packaging cap: 2-8 oz, 1-2,5 lb. (57-225gr, 0,45-1,13kg) bag width: 100-280 mm. Bag seal unit, bag magazine. Total size 1,75 x 0,80 m, height 1,65 m, weight 400 kg, with Delta control, 1,2 kW, 230 v ...

General SKU430W1384 LocationBarneveld MakeEdelstahlbau Tannroda Type350 l No.1765 Year of construction2017 Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume350 Ltr. Pressure6 Bar Pressure vessels MaterialStainless steel 1.4404 (316L) Notified bodyClosed Capacity450 l., (350 l.) Vessel sizesDia. 800x800 mm Dished bottomcheck ManholeDN400 Top connectionscheck OutletDN30 Max. temperature-20°C/+200°C Information Mounted on legscheck and wheels Weight500 kg CEcheck Floorspace1,10x1,10 m Total height1,70 m Extra Specifications- mirror polished inside - pressure gauge attached Pressure vesselsEdelstahlbau TannrodaTanks > Pressure vesselsBrand > Edelstahlbau Tannroda What you can expect from Foeth: -- Machine is  ...

General SKU430W1390 LocationBarneveld MakeHermann Waldner Type1450 l. No.5064 Year of construction2016 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 (316L) Capacity1450 l.( 1000l) Vessel sizesDia. 1200x1500 mm Dished bottomcheck ManholeDN500 Top connectionscheck OutletDN50 Max. temperature-20°C/+200°C With jacketcheck Information Mounted on legscheck Weight1400 kg CEcheck Floorspace1,50x1,30 m Total height2,30 m Extra Specifications- mirror polished inside : - pneumatic outlet valve - no lid Pressure vesselsHermann WaldnerTanks > Pressure vesselsBrand > Hermann Waldner What you can expect from Foeth: -- Mach ...

General SKU430W1385 LocationBarneveld MakeEdelstahlbau Tannroda No.1764 Year of construction2017 Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume40 Ltr. Pressure6 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435(316L) Capacity64 l, (40 l.) Vessel sizesDia. 450x400 mm Dished bottomcheck With covercheck ManholeDN250 OutletDN25 Max. temperature-20°C/+200°C Information Mounted on legscheck and wheels Floorspace0,94x0,94 m CEcheck Total height1,25 m Weight160 kg Extra Specifications- With ball spray, pressure gauge and windowPressure vesselsEdelstahlbau TannrodaTanks > Pressure vesselsBrand > Edelstahlbau Tannroda What you can expect from Foeth: -- Machine is in wo ...

General SKU437W1435 LocationBarneveld MakeMLS GmbH TypeEthos plus 2 No.124826 Year of constructionunknown Main Features Motor2.5 KW Specified Features - Miscellaneous Motor2,5 kW, 230 volt Information Total height0,75 m Weight80 kg CEcheck Floor space1,0x0,70 m Extra SpecificationsLab microwave solvent Extraction labstation, with multi Prep-p 36 rotor, color control, type Terminal 800, Cryolab cooling moduleMiscellaneousMLSMiscellaneous > MiscellaneousBrand > MLS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 500 kN, 95 g/PS, 30 mm

Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition

Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg

EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...

Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible.

Size: 55 x 28 cm (21 x 11 inch) Equipments: Good condition without any damage two stitchings heads 52/8 Maximum staple thickness of 8 mm

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Pedestrian pallet truck, Still, EXU16, 1.6 to. –used-: Price ex location: only 2.750.-€ (net). Manufacturer: Still Type: EXU16 Year of Make: 2017 Operating hours: approx. 935.6 Nominal load capacity: 1,600kg Leeward weight: 265kg Battery: 24V Weight approx. 151kg Condition: good Available: immediately Location: 88448 Attenweiler

Extruder for the production of packaging chips built in 1994

The Kinsley Extruder & Dough Machine Pretzel Stringer KPM W0-9288-1 Model 985.612F is a commercial-grade baking and dough equipment designed for restaurant and food service establishments. This electric-powered floor model features a unique design for creating pretzel strings with ease and efficiency. With the trusted Kinsley brand, this dough machine is ideal for professional bakeries looking to streamline their production process and produce high-quality baked goods.

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

This 5-axis NUKON Fiber Laser Extreme 30250 was manufactured in 2021. It features a 12 kW fiber laser, Beckhoff CNC control system, and a maximum sheet size of 2,500 x 12,000 mm. The machine supports speeds up to 50 m/min and includes a servo drive system. Consider the opportunity to buy this NUKON Fiber Laser Extreme 30250 fiber laser cutting machine. Contact us for more information about this machine.

This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information.

This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us.

This 4-axis Exeron EDM 310 MF20 was manufactured in 2006. Ideal for precision die-sinking applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 310 MF20 machine we have for sale. Contact us for more information.

General SKU430W1394 MakeHermann Waldner LocationBarneveld CEcheck Type46 l. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity46 l.( 20l) Vessel sizesDia. 450x500 mm Dished bottomcheck ManholeDia. 400 mm Top connectionscheck OutletDN40 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1500 rpm Speed mixing shaft45-55 rpm Information No.5069 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,75x0,90 m Total height2,10 m Weight300 kg Extra Specifications- control panel on the reactor (Plug &: Play) - mirror polishe ...

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

General SKU430W1392 MakeHermann Waldner LocationBarneveld CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity238 l. (150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft130-140 rpm Information No.5066 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight500 kg Extra Specifications- control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHermann Waldner ...

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This 6-axis KUKA KR 90 R3100 extra C-F-HP was manufactured in 2016, featuring a load capacity of 90 kg and a reach of 3100 mm. It includes the KRC 4 controller, enhancing its operational flexibility. Consider the opportunity to buy this KUKA KR 90 R3100 extra C-F-HP robot arm. Contact us for more information about this machine.

This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine.

Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

Special Item: Messeeinsatz table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm material thickness: ca. 24,5 - 27 mm : 200 mm weight: ca. 1.400 kg Trade Fair TABLE Slight signs of wear on the surface Welding table: - 6 legs - basic equipment 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Side cheek made of high-quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilled holes Surface in diagonal grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used extruder in good condition. Complete with motor, gearbox and heating bands

CNC machining center Type: c-expres 920 classic Manufacturer: Format-4 Year: 2017 included: 15 drills 1x milling cutter 1x saw Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - / Contact us at -

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm Information No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX compatiblecheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steel With sound proof cabinet Working hours 65 hrs Ball millsSiebtechnikMills > Ball millsBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU245P316 MakeWerner + Pfleiderer (DE) Type175/120 No.231457 Year of construction1994 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Gratercheck Sieve sizesdia.130mm x180mm Sieve perforationdia.2mm With hopperDia.500mm, h=300mm Inletdia.130mm Outlet200x120mm Motor1,5 kW, 220/380 Volt (Ex) With extra sieves(4x)dia.5mm, dia.2mm, dia.1mm MaterialStainless steel 1.4571 (316Ti) Information Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Floor space0,7x0,6 M Total height1,5 M Weight160 KG ATEX compatiblecheck Extra Specifications : : : : : : : : : : : : Sieve granulatorsWerner & PfleidererSieves > Sieve granulatorsBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared  ...

General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5065 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHerma ...

General SKULT016 LocationSpain CEcheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 3-Phase decantercheck Screw diameter280 mm Screw length1260 mm Motor15 kW Max. rotor speed4400 rpm MaterialStainless steel Information MakeAlfa Laval TypeAvocado oil line - 3 phase Extra Specificationswith: - 3x termo-blender Alfa Laval :ATMOSPHERA® Round Malaxer, 650 Ltr. each. - :Centrifugal Separator, Alfa Laval UVPX 507, throughhput capacity: 2,7 m³/h, feed temp.: max 100 °C, operating liquid density: max. 110 kg/m³, discharge volume: 7,5 Ltr., motor: 5,5 kW - Reception and washer, 1500 kg per hour - Stoner, pulper, 1500 kg of raw fruits, 1000 kg of pulp in exit - 2x :Screw pump, 1,5KW with speed variator - 2x :Screw conveyor, 5 m long, 2,2 kW - Tank for decantation 200 Ltr. - Tank for finished oil 60 Ltr. - :Thermal unit to h ...