co ex used for sale

Rotary screw air compressor Atlas Copco ZT 250 oil-free 250 kW, 7,5 bar, Volume flow 42,10 m3/min. oil-free, air cooled

Qty. 1 Second-hand continuous galvanising line Mfc.: Koryo SanGi, WMS Co., Sumitomo, Dongyang GiGong, Myungshin Mach., Kanto TK, Hitachi, Yuyoung Industry, Cosmo Gas, Hankuk Yugong, Jungwon Mach., Bugong Ind., Hanhyung Industry, SeunJin Mach., Cheongsong Electrics, Jungbu Civil Gas, HK. ENG, Cosmo Construction, KyungJin Construction, Cheonsu Hwankyung Ind., Shinhyeung Built: 1983 Some revamp in 2005 Material: Cold Rolled mild steel FH Strip Width: 650 - 1.250 mm Thickness: 0.2 -1.6 mm Capacity: REF: 27 Ton / Zn 1.2 Ton = 1 Hour HMI Main Control Operation system Zn Coating Wf 80 gm – 220 gm (Both Side) Coil Out Diameter: 2.050 mm Line Speed Max: 150 m/min Entry Section: 195 m/min Process Section: Max. 150 m/min Exit Speed Max.: 195 m/min

Compressed air screw compressor oil-free Atlas Copco ZR 400 400 kW, 10 bar, 56.3 m3/min

Rotary screw air compressor Atlas Copco ZR 400 oil-free 400 kW, 10 bar, 56,3 m³/min

Air Screw Compressor Atlas Copco GA 110 110 kW, 7.5 bar, 20.50 m3/min

Rotary screw air compressor Atlas Copco GA 110 110 kW, 7,5 bar, 20,50 m3/min

Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.40 bar, 23.60 m3/min

Rotary screw air compressor Atlas Copco ZR 160 VSD oil-free 160 kW, 10,40 bar, 23,60 m3/min

Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.40 bar, 23.60 m3/min

Rotary screw air compressor Atlas Copco ZR 160 VSD oil-free 160 kW, 10,40 bar, 23,60 m3/min

Air Screw Compressor Atlas Copco GA 250 FF 250 kW, 8.20 bar, 41.70 m3/min

Rotary screw air compressor Atlas Copco GA 250 FF 250 kW, 8,20 bar, 41,70 m3/min

We are very pleased to offer one full 40` container (FCL) containing the following compressors: Make Model Atlas Copco 1xGA 110 Atlas Copco 1xGA 75 Kaeser 1xCS 75 Kaeser 1xAS 30 Kaeser 1xBS 50 Kaeser 1xBS 60 Atlas Copco 1xGA 30 Atlas Copco 1xGA 15 Atlas Copco 3xGA 22 Kaeser 5xAS 35 For more details please contact us.

Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.4 bar, 23.6 m3 rpm

Rotary screw air compressor Atlas Copco ZR 160 VSD oilfree 160 kW, 10,4 bar, 23,6 m3/min

Compressed air screw compressor oil-free Atlas Copco ZR 315 VSD 315 kW, 8.6 bar, 49.2 m3/min

Rotary screw air compressor oil-free Atlas Copco ZR 315 VSD 315 kW, 8,6 bar, 49,2 m³/min

Air Screw Compressor Atlas Copco GA 160 FF 160 kW, 7.2 bar, 27 m3/min With built-in compressed air refrigerant dryer. Refrigerant R 404a. New mineral oil. New oil separator.

Rotary screw air compressor Atlas Copco GA 160 FF 160 kW, 7,2 bar, 27 m3/min With built-in compressed air refrigerant dryer. Refrigerant R 404a. New mineral oil. New oil separator.

Air Screw Compressor Atlas Copco GA 315 VSD FF 290 kW, 10 bar, 51 m3/min Variable speed drive. Volume flow 13.0 - 51.0 m3/min. With built-in compressed air refrigerant dryer. Refrigerant R 404a. Air end 1x replaced in 2008.

Rotary screw air compressor Atlas Copco GA 315 VSD FF 290 kW, 10 bar, 51 m3/min Variable speed drive. Volume flow 13.0 – 51,0 m3/Min. With built-in compressed air refrigerant dryer. Refrigerant R 404a. Air end 1x replaced in 2008.

Air Screw Compressor Atlas Copco GA 90 90 kW, 7.5 bar, 16.56 m3/min

Rotary screw air compressor Atlas Copco GA 90 90 kW, 7,5 bar, 16,56 m3/min

Compressed air screw compressor oel-free Atlas Copco ZT 90 VSD FF 90 kW, 8.75 bar, 15.50 m3/min Comment: oel-free, air-cooled, frequency-controlled. Delivery volume 4.7 - 15.5 m3/min. With integrated MD dryer.

Rotary screw air compressor Atlas Copco ZT 90 VSD FF oilfree 90 kW, 8,75 bar, 15,50 m3/min Oil-free, air cooled. Variable speed drive. Volume flow 4,7 – 15,5 m3/min. With built-in MD adsorption dryer.

Compressed air screw compressor oel-free Atlas Copco ZR 145 FF 145 kW, 7.5 bar, 23.20 m3/min

Rotary screw air compressor oil free Atlas Copco ZR 145 FF 145 kW, 7,5 bar, 23,20 m3/min

Air Screw Compressor Atlas Copco GA 132 VSD 132 kW, 8.5 bar, 27.40 m3/min

Rotary screw air compressor Atlas Copco GA 132 VSD 132 kW, 8,5 bar, 27,40 m3/min

Air screw compressor Atlas Copco ZR 500 VSD 500 kW, 8.6 bar, 79 m3/min Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.0 m3/min.

COGENTECH COLUMN DRILLING MACHINE TYPE VD40C -MK4 -Electromagnetic automatic voeding -50/1450 t/m -Draait right en linksom -Tapfunctie -Uitlading 180 mm -Table of 560 x 560 mm -Tandwielaangedreven -Koeling -Beschermkap -Noodstop -Verlichting -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Oil-free, air-cooled, scroll compressor with refrigerant dryer. Zero working hours. Machine unused - new! Machine available because of purchase mistake!

Rotary screw air compressor 160kW, 8.6 bar, 25 m3/min.

Rotary screw air compressor ZR 500, 525kW, 7.5 bar, 83.20 m3/min,

355 kW, 50.60 m3/min, 10 bar, oil-free, water cooled. HP 1 x replaced element.

To check torque on air and electric screwdrivers.

Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 MACH - ID 6109 Make:    Nicolas Correa Type      :L30-43 Control  :HeidenHain TNC 426 YOP      :1997 X-Axis    4.300 mm Y-Axis     1.200 mm Z-Axis     1.500 mm Table Length      6.000 mm Table Width       1.000 mm Table load         10,000 kg Power on spindle        25 kW Spindle speeds         3000 Rpm Spindle Taper          50 ISO/Bt/Mk Feed rate X-Axis      15,000 mm Feed rate Y-Axis      15,000 mm Feed rate Z ...

10.25 bar, water cooled, with built-in at compressed air refrigerant dryer, variable speed drive.

Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Screw compressor - see pictures

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Convotherm Hot air damper OES6.06 Table unit, capacity:6 x 2/3 GN flexible Bays:7 x GN1/1 or 14 x GN1/2 with memory for 250 recipes. Crisp&Tasty Disappears ür chrome nickel steel. Connection value: 11.4 KW New price:5.250,-€

Combination damper Convotherm OSP6.10 in a very good used and functional condition. 6 bays 1/1 GN, door with lateral sliding function (inchVerschwindetürinch), core temperature sensor, effervescent, electronic control and much more. 3 x in stock. Dimensions W/D/H 103/80/70 cm. Connection values 400 volts, 9-11 kW. Workshop-tested, ready for immediate use. More on request.

Hours: 37.0000 YOM: 2009 Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.

Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.

2 x Atlas Copco refrigerant dryer FD1600WFS 96 m3/min

Notching machine make COMACA type N 225 EPAS 4Machine -No: 2612Technical specifications:Knife length 225 mmMax. Sheet metal thickness 42 kg, strength 4.0 mmMax. Sheet thickness 70 kg / VA 3.0 mmfixed cutting angle 90 °Projection 110 mmStrokes per minute 45Cutting capacity 10 tTable size 1050 x 800 mmDrive power 4.0 PSWeight approx. 700 kgWith- inner depth stop- foot switch- 2 adjustable angle stops- without pneumatic automatic stopused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Oil-free. Water cooled. Variable speed drive. Volume flow 5.94 - 13.92 m3/min at 7.0 bar. New LP and HP air ends in 2012 and have 25000 working hours. Engine had been overhaulded.

37 kW, 10 bar, new mineral oil and oil separator.

Sanitary container, m/w, 10 feet (3m) We rent and sell storage containers, sea containers, construction containers, overseas containers, office container dupplants. Offer with transport possible-ask us. Sample pictures-viewing by appointment possible. Please also note our other offers.