co ex used for sale

Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!

Control Techniques Undrive M701 frequency inverter, with 5.5kW power. For Bobst Alpina 110 II matic. Control Techniques Undrive M701 frequency inverter, with 5.5 kW output. For Bobst Alpina 110 II matic.

Foba basic system overhauled and fully functional Laser class 4, 10600nm wavelength CO2 laser, with large marking field (435mm lens: approx. 340mmx340mm) Operating system Win XP, Fobagraf operating software Year of construction 2012 Approx. 60000 operating hours, laser power >25W Optionally available: protective housing, integration, extraction Gauge + trolley are not part of the offer

Vacuum Pump Atlas Copco GHS 900VSD Vacuum Pump Year: 2020 - Ultimate pressure: 0.35mbar(a) 0.26 Torr 35.0 Pa - Voltage: 380-460V - Frequency: 50 / 60 Hz 3pH - Pmotor: 15.3kW / 21hp - N: 700 r/min - Weight: 520Kg - Year of construction: 2020

Used double cone mixer. Total capacity 250 liters. Year of construction 2001. Material of construction - mixer made entirely of stainless steel. Engine power 2.2kW. Adjustable speed in the range of 5-13 rpm. Manufacturer's technical documentation available.

SPECIFICATIONS: Saw blades: max. Ø 320 mm Installed power: 22 hp Conveyor belt width: 250 mm 2 feed speeds Cutting height: max. 100 mm Motorized height adjustment Extraction opening: Ø 150 mm

For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.

Consilium Selesmar 972981 A2 R.H 972984 From old stock

Key data: 50 t, 270 mm, 850 mm

Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

PIOVAN temp controller THW118-F (2021) tempering unit 400 - V 3 - Ph 50- Hz 20 - kW 5 - KA 31 - 31 A 120 kg

Kemper Dough Weigher - Consul ET - Year 2001 - Stainless steel cladding - a chamber - Large hopper - Long conveyor belt, foldable - with flour sprinkler - Speed adjustable Height: 140cm Width: 190cm Depth: 65cm

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

Chip belt dryer, Kuvo belt dryer, length 15.5 meters+7 meters

Hollanders - ColorEdge 230 Precision cutting system for textile applications The ColorEdge 230 from Hollanders is a professional cutting system specially developed for the precise cutting precise cutting of textile materials. With a working width of 230 cm, This machine is ideal for roll-to-roll applications and guarantees clean, precise cuts, that meet the highest demands. Technical highlights: - Working width: Up to 230 cm. - Cutting technology: High-precision roll-to-roll cutting for even and accurate results. results. - Material compatibility: Suitable for a wide range of textiles (e.g. polyester). - Operation: Simple and efficient processing for maximum productivity. - Construction: Robust, durable design for continuous professional use. - Dimensions & weight approx. 320 x 200 x 130 cm (WxHxD), approx. 800-850 kg Spare parts renewed - PVC transport rollers (11/2023)  ...

Comprises of 300 litre and 500 litre vessels with independent control panels, a tote bin hoist and a transfer pump. Machinery in nice ex factory condition and being removed from the factory in Europe at the end of January 2025.

Pallet transfer trolleys on rails and Suspension cable with pallet roller conveyor

Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

An antique corner puncher Made by CHN. Mansfeld of Leipzig Germany about 100 years old. In fully operational condition. No damages; a very nice piece of Graphic history that still can be used today in production.

Kuka robot LBR iiwa 14 R820 + controller Sunrise Cabinet Including KUKA robot KRC4 SmartPad Control Panel Payload: 14 kg Reach: 820 mm Year of construction: 06/2016 The device can be demonstrated on site before purchase. Find more here - / Contact us at -

We are offering for sale a complete mobile screen plant with trailer : Trailer Type: ZAL 4PA Towing capacity: 47,000 kg Own weight: 8,600 kg Conveyor Belt Type: ML-Band Year of Manufacture: 2012 Screen Type: SEWU 2400 x 5000 Year of Manufacture: 2012 Find more here - / Contact us at -

Mitsubishi Heavy Industries Ltd Type - SC1F ( Single Cylinder Single Flow ), Condensing Steam Turbine Power : 205.440MW HP Steam : 85 ata, 538 C LP Steam : 5.5 ata 193 C Steam Turbine Generator Model : MB-H Power - 241, 680 KVA Voltage - 16.5KV, 50 Hz

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

swing dia.: 440 mm max. turning diameter: 220 mm turning length: 450 mm travel -x axis: 200 mm control: Fanuc 18i-TB max. helix angle: 60 ° spindle bore: 64 mm tool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. swing diameter over bed: 510 mm max. turning diameter: 260 mm Max. Turning length: 540 mm travel -x axis: 240 mm center height over bed: 260 mm control: FANUC 21i-TB spindle bore: 77,5 mm no. of tools in turret: 12 x tool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Satin sander COSTA LEVIGATRICI model S A2 TS 1350 : – with electronic PCM control and touch-screen video – useful working width 1350mm – useful working thickness from 3 to 160mm – variable feed speed from 5 to 25 m/min – with perforated belt and depressor – n° 1 belt unit with pad, 2620mm belt development, with air blowers belt cleaning – n° 1 scotch-brite group (inside the machine) Year 2000, CE regulations

A used deck oven Miwe Condo CO 4.0806-2D black from 2013 is currently for sale and immediately available in stock. Miwe Condo CO 4.0806 2D Stone Slabs Oven in Nostalgia Black - Deck oven with 4 shelves and proofer - Manufacturer: Miwe - Model: Condo CO 4.0806 2D - with 4 shelves each 80x60cm - Max. temperature: 320°C - With Miwe FP8 control - Floor entrance height: 13cm - with proofer - With exhaust hood and steam condenser - Year of construction 2013 - 18.9 kW - 400 Volt 50Hz - External dimensions approx.: 110 x 115 x 210cm W x D x H More information and pictures, as well as shipping costs and trade-in on request.

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Year of Manufacture: Model: WN29/ WPC-ELT-001-0248 Type of Machine: 400 Ton Hydraulic Press - Press Model: 225.400 - Weight (Net): 75,000 Kg - Maximum Force: 4000 KN - Nominal Distance from Bottom Dead Center: 12 mm - Normal Stop Position of Crankshaft: Top Dead Center Tooling and Capacity: - Maximum Tool Dimensions (Height x Width x Depth): 700 x 2500 x 160 mm - Maximum Weight of Upper Tools: 7000 Kg - Maximum Permissible Flywheel Speed: 489 RPM Operational Parameters: - Continuous Stroke Rate (Min/Max): 12 - 30 Strokes/Min - Maximum Clutch Engagements per Minute: 20 Strokes/Min - Maximum Effective Clutch Engagements per Minute: 10 Strokes/Min - Stroke Range (Min/Max): 200 mm - Slider Adjustment Stroke: 300 mm - Maximum Tool Speed (Adjustable Stroke): 700 mm Power and Pneumatics: - Electrical Supply (Voltage/Frequency): 400V / 50Hz - Installed Electrical Power: 4 ...

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm total power requirement: kW weight of the machine ca.: 161 t dimensions of the machine ca.: m x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm CNC control 840 D Table load 12 t Table dimensions - lengthways 5000 mm Table dimensions - crossways 2500 mm ATC tool changing device 200-pos. Tool weight max. 30 kg Tool holder HSK A 100 Tool diameter 250 mm Tool length - max. 500 mm Spindle speed: 5 - 6000 rpm C-axis -10 to 370 deg B-axis 5 to -95 deg Column distance 3000 mm Machine weight approx. 161 t Space requirement approx. 20.5 x 11 x 6.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1168 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

SPECIFICATIONS: Machining length: max. 3000 mm - min. 250 mm Processing thickness: min. 30 - max. 155 mm Processing width: max. 200 mm Tenon cutting area 01 Tenon cutting unit - max. Ø 400 mm - 3 kW 01 Spigot cutter - length 600 mm - 7.5 kW - shank Ø 50 mm - 3100 rpm 01 Electronic guidance Roll forming area: I Roll forming unit - length 600 - 7.5 kW - shank Ø 50 mm - 6000 rpm II Roll forming unit - length 600 mm - 7.5 kW - shank Ø 50 mm - 6000 rpm 01 Glazing bead unit - Ø 200 mm - 2.2 kW 01 Rubber roller drive unit

Control Cabinet for Tetra Pak Conveyor Systems Industrial control cabinet designed for operating and controlling Tetra Pak conveyor systems in beverage and packaging lines. The cabinet is equipped with reliable automation components, ensuring stable and efficient conveyor operation. General Information - Application: Control system for Tetra Pak conveyor lines - Condition: Used Installed Components Control System - PLC: Siemens PLC Electrical Components - Circuit Breakers: Schneider Electric Drives - Frequency Drives: 4 × Danfoss frequency drives Sensors - Detection Switches: 8 × SICK detection switches Key Advantages - Designed for Tetra Pak conveyor system control - Equipped with Siemens PLC automation - Reliable Schneider Electric electrical protection components - Includes Danfoss frequency drives for motor speed control - SICK detection switches  ...

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the  ...

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AKR-KNOCK CONTROL RS - 12404594

AKR-KNOCK CONTROL RS - 12473957

AKR-KNOCK CONTROL RS - 12473965

Description : Corazza FB 230 butter portion Packer for 7-20g butter hotel size portions. The Corazza FB 230 is capable for forming, filling and wrapping the portions ending up in the collator (Box Packer ) ie. 7g in 200 pcs per box. The machine has been under full rewiring and refurbishment with full strip down. The product feed has twin screw motor driver augers . Paper feed is direct from reel with photo mark sensors. Main parts of filling and product parts are stainless steel . Vacuum pump proving the vacuum for the paper handling and pocket vacuums. Technical Description Make : Corazza Model : FB 230 Filling Volume : 7-20g Cell Dimensions: 30 x 45 mm Speed :0 - 220 pcs per minute Height Adjustment : 7 mm to 18 mm Paper Forming : Single reel that is cut in two parts Product Feed : Hopper Photocell : Paper correction Unit Box Packing : 200 pcs per box ( ...

Automatic capsule filling machine for dosing liquids into hard gelatin capsules. Incl. liquid dosing unit and feeding unit for capsule-in-capsule applications. The system is in containment version and equipped with capsule formats for sizes 0 and 00. PLC: B&R APC 3100. Output: Liquid in capsules: up to 14,760 pcs/h, Capsule-in-capsule: up to 12,600 pcs/h

Göpfert Ovation HBL 16/24 6 colours flexo printer for corrugated board – complete line Very nice 6 colours flexo printing line with prefeeder and stacker Sheet size max.: 1.530 x 2400 mm / 60.25" x 94.25" Sheet size min.: 460 x 600 mm / 18" x 24" Print area.: 1,520 x 2400 mm / 60" x 95" Corrugated board thickness: Max.: 1.0 – 9.0 mm – 0.039" – 0.354" Mechanical Speed: 10.000 sheets/hour Machine is in production in western Europe Can be tested Please contact PP Machinery Team