co ex used for sale

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -double shaft output -Design: B3 -Protection rating: IP33 -Dimensions: 370/250/H190 mm -Weight: 16 kg

Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

tire mounting machine -Plate diameter: 475 mm -pneumatic tire press -Folding arm -Weight: 208 kg

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

BVM Compacta 5015 incl. tunnel Built in 2000 In stock and ready for immediate use

Collamat 3600 pages labeler Currently in stock Immediately ready for use

MAPPACK Conpax Servo Wrap Packaging Machine Foil Packaging

Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

MPS EB 370-8 COLOR FLEXO Labelpress machine Year 2016 Printing width max. 360mm  Equipment: Unwinder 1000mm diameter, 76mm expandable shaft 8 color Flexo – servo driven units Teknek two-sided web cleaner Double the station iStip Laminator on rail De-lam re-lam Web Turn bar BST Powerscope 4000 8 x UV from GEW, E-Bricks stepless, housing E2C Rewinder Accessories:

BV 17 cm, LIH, CRT double monitor, patient archive system

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165

Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter -Handover in the current condition as seen -Condition: see pictures (not complete) -Diameter: 325mm -Inserts: Carbide -Intake: SK50 -Dimensions: 325/325/H210 -Weight: 28.8kg

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

Technical data of Used Universal cylindrical grinding machines Cometa HSP 2000: Wheel diameter: 762 mm Max diameter working: 800 mm Center height: 410 mm Working lenght: 2000 mm Wheel power: 15 hP Weight: 11 ton

Line filter for frequency converters -Manufacturer: Corcom -Type: 80FCD10B -Number: 1x filter available -Price: per piece -Dimensions: 310/170/H140 mm -Weight: 8 kg

For sale are used KALT cheese vats: Manufacturer: KALT Year of construction: 2001 and 2004 Design: closed, double-O Material: Exterior: Stainless steel (V2A) Inside: Copper Includes control cabinet and Siemens HMI (touch panel)

Bundle clamping device manual

Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

Gear motor, electric motor -Speed: 107 rpm -Power: 0.75 kW -Construction: B5 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake: 380 V -Number: 1x motors available -Price: per piece -Dimensions: 490/240/H220 mm -Weight: 24 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot defective, see photo -Power: 7.5 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 510/370/H340 mm -Weight: 110 kg

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 22 mm x 60 mm -Design: B5 -Protection class: - -Flange diameter: 254 mm -Recess diameter: 180 mm -Dimensions: 380/305/H250 mm -Weight: 32 kg

Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm

Boxes Flow-through dishwasher Kitzinger Contino CWS802 -Boxes dishwasher -Scrolling machine -48 kW -Year of construction: 2012

Electric motor, three-phase motor with 2 speeds -Power: 0.55/0.75 kW -Speed: 945/1410 rpm -Shaft: Ø 19 mm -Brake -Construction: B5 -Protection class: IP 54 -pole changing -Dimensions: 400/200/H230 mm -Weight: 25 kg

Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz

Collamat NG50 YL Side labeller 2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)

Deutz TCD 6.1 L6 engine Miretti Ex conversion diesel trolley mining

Key data: 525 , 700 , 400

525 kW Tuthill Coppus condensing steam turbine RLHA24 from 1999 in good condition used for sale. Manufacturer: TUTHILL Coppus Model: RLHA 24 Type: Steam Condensation Serial Number: 99H5046 Performance mech. [kW]: 525 Pressure inlet [bar]: 16 Temperature inlet [°C] 350 Pressure outlet [bar]: 0,70 Year of construction: 1999 Weight [kg]: 5700 Dimensions LxWxH [cm]: - More information here: stromerzeuger-discount.de/angebote/dampfturbinen/tuthill-coppus-rlha24 /

Gear motor, electric motor, electric gear motor -Speed: 60 rpm -Power: 0.45/0.55 kW -Construction: B3 angle -Diameter shaft: 24 mm hollow shaft -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 530/200/H240 mm -Weight: 31 kg

Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 28 mm -Design: B3 -Protection rating: - Quantity: 1 piece available -Dimensions: 420/320/H290 mm -Weight: 54 kg

Three-phase motor, electric motor -Power: 5.2 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 450/340/H270 mm -Weight: 65 kg

KRONES CONTIPACK A1 Extractor Capacity: 4,200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg KRONES CONTIPACK A1 Unpacker Capacity: 4.200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg

Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

1. TBA/19 - Model 30 V - YOM: 2009 - Capacity 7500 p/h (currently reduced to 4000 p/h) - Package type TWA 200 Slim - running hours: 9000 2. Straw applicator - Model: SA1 - YOM: 2009 - Straw type: U4/180 - Running hours: 18,000 3. Cardboard Packer - Model CBP78 - YOM: 2008 - Packaging Pattern 1x8 Running hours: 1800

Robot Cobot Universal Robots UR5 Year of construction: 1/2017 Number of axes: 6 Max. payload: 5kg Max. working range: approx. 850mm Scope of delivery: robot, controller, cable, teach panel

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.