co ex used for sale

Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Twin-tower automated sheet metal warehouse by PrimaPower - specyfikation: - Combo 1530/2 H6.3, twin-tower warehouse, height 5,970 mm - Year of manufacture 2014 - Control panel - IOW station on the Y axis with rear bumpers for material positioning on block no. 2 - Barrier system and service door for the IOW station - Double wagon on the Y axis for connecting the LD machine to the SG on block no. 1 - 38 cassettes with a load capacity of 3 tons each, sheet stack height up to 100 mm - Maximum stored material dimensions 3000 x 1500 mm. Sheet stack up to 100 mm - The warehouse is loaded with full pallets (without a wooden support) using a forklift and a forklift, or with single sheets - Two trolleys on the outfeed side deliver material to connected devices. The trolley with a further outfeed runs ...

Transformer Description Manufacturer: Gonella Costruzioni Elettromeccaniche Location: United Kingdom Type: Three-Phase Transformer Power: 1600 kVA Frequency: 50 Hz Year: 1983 High Voltage : 10,000-20,000 ±5%, 92.38 A, 46.19 kV Low Voltage : 400-233.3 V, 2309.99 A

Chiller - Euro Cold 09-CF-02960 / New, unused Year of Make: 2014 Location: Lodz, Poland Description: Cooling capacity approx. 45 kW Refrigerant R407C The device has: - 1 compressor - Separate container for medium - Barrel pump -Radiator - Fan x 2 The device has an additional heating function and can be used to control the temperature of tools The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Size: 1400 mm Equipments: Register punch Good condition

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

used rack oven Wachtel Compact 1.10 F, in baker's condition, ran perfectly until the end, 400 V, 50 Hz, heating power 104 kW, for trays 60 x 100 cm, for trolleys with 20 supports, incl. 1 rack trolley, with br. Oil burner, digital control, factory no. 71925

used rack oven Wachtel Compact 1.10 F, in baker's condition, ran perfectly until the end, 400 V, 50 Hz, heating power 104 kW, for trays 60 x 100 cm, for trolleys with 20 supports, incl. 1 rack trolley, with br. Oil burner, digital control, factory no. 72152, built in 2012

L + Z lathe COLCHESTER / HARRISON type Student 1800Masch. No. 4/0023/08817 Year of construction approx. 1985Center width 635 mmTurning diameter over bed 330 mmTurning diameter over face slide 210 mmCenter height over bed 165 mmCenter height over face slide 105 mmSpindle bore 42 mmFeed longitudinal and planeChuck intake Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Quill adjustment 110 mmSpindle speed 22 - 1800 rpm. 16 stepsDrive power 2.2 kWWetz connection

Reel incl. coil turner is for sale

Key data: 350 mm, 2 t, 1500 mm

Double decoiler Load - 2 x 1500 kg Belt width 350 mm Coil outer diameter - up to 1600 mm Coil inner diameter - 360-530 mm Manualle hydraul. Spread Pneumat. Pinch roller mechanical brake Dimensions - approx. 2 x 2 x 2.2 m WxDx H Bto - 1000 kg

A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.

Vaccum Lifting Device COVAL VAC 12 FH Year of construction: 2012 Maxi loading capacity: 80 KG Suction cups diameter: Ø 150 mm Maxi spacing: 910 mm Mini spacing: 350 mm In very good condition Voltage: 380 V Dimensions (L x W x H): 1100 mm Depth: 900 mm Total height on frame: 1000 mm Total weight with support: 100 KG

Second Hand Atlas Copco GA250VSD 250 kW with 10 bar and 44.90 m3/min. Year of manufacture 2018 with around 34,000 hours

Second Hand Atlas Copco GA315VSD. 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with around 36,000 hours

Second Hand Atlas Copco GA400W (water-cooled) 400 kW, 8.5 bar at 66.60 m3/min. Year of construction 2009

Second hand oil-free Atlas Copco ZR132. 132 kW with 7.5 bar and 19.10 m3/min. Water-cooled. Built in 2010 with around 39,000 hours.

Printing technology: FDM, printing material: ABS filament, material capacity: approx. 700cc, build volume dimensions X/Y/Z: 203mm/203mm/152mm, input format: STL. Includes printed parts and material bags. Documentation available. An on-site inspection is possible.

The vibration screen ASCO VS COMPACT is a robust, semi-mobile screening machine designed for high-performance material separation in recycling, construction, agriculture, and gardening. Equipped with two powerful vibration motors, it handles soil, gravel, wood chips, waste, chip bundles, and more with efficiency and reliability. Its compact, foldable design saves space and allows flexible use, while modular expansion options make it adaptable to different site requirements. The system can operate with one or two decks, separating materials into up to three fractions and can be expanded with modular conveyor belts and a funnel plate. The screen angle is adjustable for precise adaptation to various materials, and the unit is compatible with 400V connections. Quick-change screens work with perforated sheets, screen grids, or bar sizers to suit diverse tasks. The VS COMPACT combines  ...

The ASCO VS Compact One Deck vibration screen is designed to handle diverse screening tasks efficiently, making it an excellent choice for recycling companies and businesses in construction, agriculture, and landscaping. Equipped with two powerful vibration motors, it ensures high screening performance and optimal material separation for soil, gravel, wood chips, waste, and other materials common in the recycling and building materials industry. Its semi-mobile design with a foldable construction saves space and makes transport and setup simple, while the modular system allows quick expansion to meet changing operational needs. Users benefit from adjustable screening technology, with a variable screen angle for precise adaptation to different materials and compatibility with a standard 230V power connection. Screen decks are easy to change and support various screen meshes and perf ...

OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse

Vacuum filler bloc BERTOLASO COBERT with 48 filling valves blocked with 8head screw Closermachine, aluminium work direction: right to left year of manufacturing: 1995, with safety housing Siemens S 7 control system CIP able central valve adjustment fixed for one bottle size technical inspected and ready to work

table-size: 500 x 380 mm Overall size: 1400 x 1500 x 1800 mm weight of the machine ca.: 500 kg round table: 3-jaw chuck: diameter: 125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation

Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I

TONAZZI TUBE FILLING MACHINE COLIBRI 1001 Year of manufacturing: 2003 Automatic machine for filling and sealing tubes. Used in various industries, like the cosmetic, pharmaceutical, food and chemical. CHARACTERISTICS • Ideal for small to medium and large productions • Intuitive operator interface • Includes devices to protect the operator during operation PRODUCTION • Mechanical speed: up to 100 tubes/min. • Tube Size Range (Ø): 10 ÷ 50 mm • Tube Size Range with cap (H): 50 ÷ 250 mm • Filling Capacity: 3 ÷ 390 ml • Mechanical Speed: up to 100 ENERGY CONSUMPTION • Water Consumption (for plastic or laminate tubes only): 180 l/h • Installed Power for plastic or laminate tubes: 9.2 kW • Installed Power for metal tubes: 6.7 kW • Max. Air Consumption at 5 bar (basic machine): 4000 l/h DIMENSIONS • Size (with stirrer): 2150 x 1260 x 2100 mm; Approx. ...

COSTARELLI PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-450 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.ger ...

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...

Manufacturer: Core Link AG Model: CL410-ALU Year of Manufacture: 2010 Type of Machine : Conveyor belt Condition:well preserved // removed without damage Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 190 kg,

Height=1.42 m, Overall length= 0.4 m, Overall width= 0.6 m, Net weight= 63 kg,

Height=1.07 m, Overall length= 0.6 m, Overall width= 0.5 m, Net weight= 55 kg,

Height=1.85 m, Overall length= 1.31 m, Overall width= 4.56 m, Net weight= 1295 kg,

Technical details shown on picture. Parts shown by hand not come.

Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP NC total power requirement: 1.5 / 2.2 kW weight of the machine ca.: 290 kg range L-W-H: 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allows ...

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The  ...

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP CNC total power requirement: 2.6 / 3.5 kW weight of the machine ca.: 605 kg range L-W-H: 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allow ...

Tested Atlas Copco ZR160VSDFF oil-free screw compressor. 160 kW Year of manufacture 2018 Only 27889 hours. Full service history. drum dryer integrated. Frequency-controlled.

Key data: 1100 mm, 1 t

Paternoster for sheet metal coils 7 gondolas, each with a usable width of 110 cm Load capacity 1300 kg Net weight 800 kg Height 235 cm

A packing station Marel including three scales is available. The machine is suitable, for example, for flow pack packaging (Geba SC 125 MAV etc.). It is well packed and ready for collection. Documentation available. An on-site inspection is possible.

x-travel: 5.000 mm y-travel: 3.100 mm z-travel: 1.200 mm Control: HEIDENHAIN TCN 530 HSCI table surface area: 5.000 x 2.000 mm T-slots: 11 T - slots - width: 22 mm table weight: 30.000 Kg rapid traverse X-axis: 20.000 mm/min rapid motion - y-axis: 30.000 mm/min number of spindle speeds: 6.000 U/min/rpm Spindle power: 32 kW taper ISO: Kegel ISO 50 Tools changer: distance between columns: 2.800 mm Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Portable handwheel Laser tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We currently have over 15 Atlas Copco GA90 in stock in various versions. Frequency-controlled. With integrated dryer.

Band saw Jäspa Compakt 2

A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.

Dairy Machinery UK offers the change over on clients machines as well as machines we can supply from our stock with the ability to Pack the Medallion Mini portion 10g Butter ., We have supplied a number of machines around the world with this format and we have fully equipped our workshop and personnel to change over, refurbish and supply the machines with excellent outcomes on the packing, speed and end of line packing in semi automatic carton Packer for 100 pcs per carton., The machines supplied by Dairy Machinery UK come with a specific patent that was born in our workshop keeping productivity, quality and material excellence., Contact Us for more information ., Machines: Benhil, Corazza, Kustner, Vezzadini , Portion Types: Round, rectangular , Delivery time: 3 months from order , Cardboard Packer: Included

Height=1.97 m, Overall length= 1.1 m, Overall width= 7.3 m, Net weight= 2600 kg,

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...