We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,261 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.
used
PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.
used
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
new
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
new
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
used
Process container standing Content 545 litres Product room: Pressure-resistant/vacuum-resistant +3/-1 Operating temperature 143 °C Interior polished Double jacket for heating and cooling: Pressure resistant + 2 bar Operating temperature 143 °C Mobile Agitator flange there is no agitator Pharmaceutical version
used
Due to loss of order! Built in 2018! Very good technical condition, usage-related, corresponding wear and tear optically! - 2 pieces available (second machine: same year of construction, 393h), the indicated price is as unit price! - including original charger, battery power 100%! manufacturer's technical data: Working capacity up to m2/h: 3,080 Range up to (h): 3.1 Working width (cm): 56 Width with suction base (cm): 70.5-80 Cleaning agent tank/dirty water tank (l): 65/75 Brush rotations (rpm): 160 Anz. Disc brushes (cm): 1 x 56cm Power supply: battery 24V
used
Sell a High Power Pulse Generator, the Cober brand. Model 606P The device is used and comes from a site shutdown, from the field of laboratory workshop. Device is unchecked as we have no knowledge of the operating system.
used
With built-in compressed air refrigerant dryer. Refrigerant R 404a. Variable speed drive. Volume flow 5.46 - 30.9 m3 rpm. Air end refurbished at 37920 working hours.
used
Oil-free. Water cooled. Variable speed drive. Volume flow 4.5 - 15.5 m3/min. at 7.0 bar. With built-in compressed air refrigerant adsorption dryer. HP air end 1x replaced. With energy recovery.
used
Variable speed drive. Volume flow 1.0 - 5.84 m3/min. at 7.0 bar. With built-in compressed air refrigerant dryer. Refrigerant R 410a.
used
Working Length: 3300 mm
used
Working Sizes: 1300 x 3500 mm
used
Working Sizes: 1300 x 3500 mm
used
Power: 45 kW Year of manufacture: 2015 Type of refrigerant: R407C Compressors: 2 pcs. Sanyo (scroll) Hydraulic module: water pump and open buffer tank Number of fans: 3 pcs. Refrigerant circuit: 1 pcs. Dimensions: 2.30 x 0.87 x 2.15 m. Weight: 700 kg. Condition: excellent
new
PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...
used
Variable speed drive. Volume flow 1.0 - 5.84 m3/min. at 7.0 bar. With built-in compressed air refrigerant dryer. Refrigerant R 410a.
used
Variable speed drive. Volume flow 10.6 - 19.5 m3/min.
used
• Filling machine COBERT mod. OLIMPIA – 6.000 bph: • Year: 1994 • Producer: COBERT • Speed (BPH): 6.000 bph • Direction: Counterclockwise • Gravity filler. • Height adjustable bell. • Safety protections. • 2 cylindrical bottle formats. • Code T 28
used
• Filling machine CORTELLAZZI 32 valves isobaric – 2.800 bph: • Year: 1996 • Producer: CORTELLAZZI • Speed (BPH): 2.800 bph • Direction: Clockwise • Machine in good condition • Isobaric filler Melegari • 32 valves • Self levelling • Safety protection • Code T 1
used
Variable speed drive. Volume flow 2.0 - 14.68 m3/min. Air end 1x replaced. With energy recovery.
used
Variable speed drive. Volume flow 1.9 - 17.07 m3/min. at 7.0 bar.
used
With built-in compressed air refrigerant dryer. Refrigerant R 404a. With energy recovery.
used
Variable speed drive. Volume flow 12.4 - 50.5 m3/min. at 7.0 bar. Air end 1x replaced.
used
With built-in compressed air refrigerant dryer. Refrigerant R 404a. With energy recovery.
used
Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition
used
working lenght 3.050 mm power 60 ton throat deepth 350 mm CNC cybelec nr.02 axes back gauge manual table compensation
used
Canister machine in very good condition
used
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann Type : 2x Hydo 24 chocolate depositor 1x hydraulic unit included YOM : 2001 Output : up to 25 cycle/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked
used
Industrial Metal and plastic cleaning machine: COLOR-DEC ITALY GREAT CONDITION
used
Aseptic line SIG Combibloc model: 209-32 capacity of 9,000 packages per hour capacity: 500ml, 700ml, 750ml, 1000 ml Cap: CombiSwift carton type: SIG Combifit
used
with 40 filling valves work directionl: left - right including safety housing and stainless steel enclosure
used
Electronic tenoning machine for door and window frames COLOMBO AT 35 second hand machine CE Standard : Yes machine composed by 2 working units : 1 End-cutting circular saw : Blade diameter mm 400 Motor power Hp 4 Horizontal movement of the blade mm 130 Max. height of cut mm. 125 Tenoning spindle : Automatic tenoning carriage: Stroke mm 1700 Worktable dimensions mm 600 x 1100 Spindle diameter mm 50 Spindle length mm. 620 Vertical stroke mm. 540 Max tool diameter mm 320 Motor power Hp 10 Weight kg 1800 volt. 380/50
used
Busch Vacuum Pump Type NS0600B DZ sporadically used Built: 2016
used
Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.
Guide bush COOK BOLINDERS and MECOUTIL by expert
spare parts - cook bolinders - pinch roll pivot arm - infeed bottom Feed swivel bracket bottom (front) made of ST Plate 2.2 No. 54
used
Clamping bruecke outlet Plate 6.1, No.
COOK-BOLINDERS Inlet top, left thread, L 260 mm 2 Stueck Plate 4.3, No. 12 (L)
Tooth and chain wheels for feed
spare parts - cook bolinders - top clamp Clamping shoe eneerone Plate 3.1B, No. 20
spare parts - cook bolinders - Hydraulic cylinder PRESSING Hydraulic cylinder pressEN
spare parts - cook bolinders - Cutter hood in steel execution Fraeshaube steel-exposure old glue system Plate 4.1C, No.
spare parts - cook bolinders - bottom drive roll Feed roller below Cmtajuaa 2 Stueck Inlet, D = 147 mm; L = 233 mm; d = 35 mm Inlet, D = 145 mm; L = 240 mm; d = 35 mm Plate 2.2, No. 3
D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83
D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83
used
Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph
used
Digital Table area 800 x 900 mm Cross-stroke table 1200 mm Drilling depth 700 mm Vertical stroke 900 mm Tool holder ISO 50
used
Used mill made by Comec, model MM-12. New 2014. Weight 650 kg, 12 L, 30 kW, 6 Bar, CE, Eex dIIB T4. Control panel.
used
Variable speed drive. Volume flow 0.95 - 5.58 m3/min. at 7.0 bar. With energy recovery. Without refrigerant dryer!